RedCat
-
Posts
55 -
Joined
-
Last visited
Posts posted by RedCat
-
-
Hi,
I need help. The story:
I have xpenology 7.2.1 under proxmox, TRPC loader. I have 5 hdd (100 gb virtual for system, 3 in raid, 1 single). It worked properly. I did a restart, it restarted, but i cant login, xpeno says: The system getting ready, please log in later.
Restart, result is same.
1. I tired to renstall loader, dont boot xpeno.
2. I changed loader to ARPL RR 23.11.10. I maked new loader.
3. ARPL found the xpeno, repaired it. It booting.
4. I can login the system, but said system partitions are broken, fix it. I push "fix" it.
5. I try to reboot. And dont boot again.
6. In loader I choose "force reninstall DSM"
7. repeat again from 3.
Sometimes it dont show partitons errors, but I go to partiton manager, i see, it repair itself.
It work until first reboot, because after fix, it cant boot again.
how can I fix this loop?
-
55 minutes ago, pocopico said:
No you can stop at count down of TCRP Friend by pressing <ctrl-c>
Then you can type bfs and hit enter, this wil force DSM to boot in junior mode and you can re-install keeping configuration.
Thank you! I reinstalled the dsm, now all work perfectly.
You asked me, set SataPortMap=888 and DiskIdxMap=00.
It is good for me? Or what is the correct numbers?
- 1
-
What can I do now? How do I access my documents? DSM is dead. Even samba doesn't work.
How can I downgrade the system? Or reinstall?
If I change the serial number, will it reinstall the dsm? -
13 minutes ago, pocopico said:
So the HTML Builder returned 0 ? Thats a value that DSM will not accept and in the past caused a KP. Thats good to know also. So since you've tried with the exact hardware configuration, Can you please change to SataPortMap=888 and DiskIdxMap=00
I did it, and recrated the loader. DSM boot, but nothing changed. Booting up the system. Please login later!
-
1 minute ago, pocopico said:
Can you please specify the above ?
Sorry, I am slow See it above
- 1
-
39 minutes ago, pocopico said:
Please disregard my previous message, i'm in middble of something else and i didnt pay enough attention.
Your system is always busy state, starting up, Thats something new, I dont know how to solve this. Something is holding the system from starting. Are your sataportmap and diskidxmap the same as before ? How are they set ?
I dont remember the old 7.1 diskidxmap and sataport values.
The CLI satamap now command gives back SataPortMap=1 and DiskIdxMap=10. The web version detect 0 and 8.
I tried both, same result: "Booting up the system. Please login later!"
-
13 minutes ago, nemesis122 said:
the login is
admin
pw: blank (nothing)
Thx, I tried it, nothing changes. "Booting up the system. Please login later!"
-
15 minutes ago, pocopico said:
I know this IP block system, If there are too many login attemps. then it says too many login attempts, IP blocked.
Here is another problem. Here it say: "Booting up the system. Please login later!"
I cant login, I cant access the dsm.I tried another IP too. Same error.
How can I reinstall the DSM?
-
4 hours ago, pocopico said:
For proxmox, i would use the loader attached at a USB disk.
Please follow the instructions of other users, as this has been thoroughly tested and works.
I did the usb loader. Now not restarted the VM, but the result is same:
DSM boot, I see Login screen.
Enter Username and passwd.
"Booting up the system. Please login later!"
I cant login. I waited 1 hour, but nothing changed.
-
19 minutes ago, pocopico said:
For proxmox, i would use the loader attached at a USB disk.
Please follow the instructions of other users, as this has been thoroughly tested and works.
The system worked like this for a long time. The loader booted, everything was fine. You changed something yesterday, since then the loader won't even boot. I don't think this is normal, you might have messed something up. Please find and correct the bug.
Ok, I'll try to boot from usb. -
1 hour ago, pocopico said:
Can you please give me some details on the platform and your hardware specs ?
Of course:
Proxmox run on this hardware:
Asrock Steel Legend H570 motherboard
Intel i5-11400 CPU
32 GB ram
512 GB NVME SSD
1x2.5 Gb ethetnet
Xpenology virtual mashine:
6 GB ram
4 cpu core
6 HDD:
- sata0: 1 GB loader
-sata1: 100 GB virtual HDD for DSM and programs
-sata2-4: SHR raid for my data
-sata5: single volume for camera video
Virtio network card
I used before 7.1 dsm on 920+. It worked perfectly 1 years long
Yesterday I tried to update it to dsm 7.2
-
1 hour ago, pocopico said:
I've updated some modules, can you try to recreate the loader once more ?
I did it, but something went wrong. I recreated the loader. Friend boot, show IP, Mac, etc.
Count back 5 to 0, and try loading (i think). But 1 sec after the virtual machine restart, and boot again. start friend...
I tried 3x times to recreate loader.
The new loader (web) detect
SataPortMap= 0
DiskIdxMap= 8
The old loader (below 0.9) detect
SataPortMap= 1
DiskIdxMap= 10
Which is good? I tried both, always restart the vm.
I tried start it without friend, I selected direct sata from menu, vm restarted inmeditaly
-
4 hours ago, RedCat said:
Hello
I tried your Web builder.
I upgreded my 920+ from 7.1 to 7.2
I booted image, put my Ip to browser, select my model and add 2 extensions: ACPI and Virtio
Build
First boot with friend was ok. The system ask the new .pat, upgrade...
First login OK.
I trired restart. OK
system boot, login screen.
Enter Username and passwd.
AND
The system is ready. Please log in later! or similar message.
I cant login.
I waited 10 mins, tired it adain, nothing changed.
I see login screen, and ask pw, but nothing changes.
What can I do? I tried rebuild the loader, the result is same...
Edit: I use xpeno under proxmox
"Booting up the system. Please login later!"
I cant login login sience 4 hours. Services (plex, samba) dont run.
ssh work, but if I try to login: Server unexpectedly closed network connection.
What can I do? Please help
-
On 6/2/2023 at 4:33 PM, pocopico said:
The TCRP HTML Builder has reached a stable status and it is available for all to test and report any additions or ideas to improve.
Thanks to all for the assistance in testing and especially @pcristi for pointing some bugs Thanks Mate !
You can have a look at :
https://github.com/pocopico/tinycore-redpill/wiki/TCRP-Web-Builder
More pictures and a how to manual will be soon be in the WiKI section of the repo.
To try please download latest 0.9.4.8 and point your browser to the TCRP ip e.g. http://yourip
Hello
I tried your Web builder.
I upgreded my 920+ from 7.1 to 7.2
I booted image, put my Ip to browser, select my model and add 2 extensions: ACPI and Virtio
Build
First boot with friend was ok. The system ask the new .pat, upgrade...
First login OK.
I trired restart. OK
system boot, login screen.
Enter Username and passwd.
AND
The system is ready. Please log in later! or similar message.
I cant login.
I waited 10 mins, tired it adain, nothing changed.
I see login screen, and ask pw, but nothing changes.
What can I do? I tried rebuild the loader, the result is same...
Edit: I use xpeno under proxmox
-
Hello!
Somebody has 918+ 7.1.0 U3 file? I need it for repair my nas...
Thanks!
- 1
-
Hello!
Somebody has 918+ 7.1.0 U3 file? I need it for repair my nas...
Thanks!
-
15 hours ago, Ylamarche5382 said:
Thanks, but it is U2, not?
-
Somebody has 918+ 7.1.0 U3 file?
Here was https://archive.synology.com/download/Os/DSM/7.1-42661-3 , but now i dont find it...
-
Yes, hot plug is enabledin the bios, 4 hdd work perfectly. I disconnected the 5th hdd, but the systen don't boot.
I think, i did big mistake with the new loader creation.
We forget the 5th hdd, first we try to fix the boot process.
Thank you!
-
Hello
I did upgrade 918+ from 7.1.0 U2 to U3. It was successful. Then I add one more hdd to the syno. The DSM didnt found it.
I thought I make one new loader. I built one new 918+ 7.1.0 loader. All are successful, oh not. The DSM didnt boot.
Ok, I tired postupdate. But it is unsuccessful, it found:
Found Version : 7.1-42661-0
Do you want to use this for the loader ? [yY/nN] :It didnt fount the U3.
What can I do now? How can I fix this?
Thanks!
-
23 hours ago, RedCat said:
Hello
I use 918+ 7.1.0 u1 under proxmox. I tired to update u2
I did ownload and manual upgrade. After restart, I started the loader
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh backup
./rploader.sh postupdate apollolake-7.1.0-42661
reboot
After syno restarted, it drop errors. If I press repair, it do it, then show all hdd are normal. But i do reboot, it show it again. Fix it, all are normal. Reboot, show errors again.
The hdds are ok, smart ok too.
What can I do?
Can anyone help?
-
Hello
I use 918+ 7.1.0 u1 under proxmox. I tired to update u2
I did ownload and manual upgrade. After restart, I started the loader
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh backup
./rploader.sh postupdate apollolake-7.1.0-42661
reboot
After syno restarted, it drop errors. If I press repair, it do it, then show all hdd are normal. But i do reboot, it show it again. Fix it, all are normal. Reboot, show errors again.
The hdds are ok, smart ok too.
What can I do?
-
6 minutes ago, pocopico said:
Depends on if you’ve used the buildroot option or not
What is buildroot option? I use i440fx on 918+, everything work perfectly
-
16 hours ago, Hemin said:
Hello,
I have some problems with my installation. I have a working installation with Proxmox v7.1 with q35 VM and virtio nic DS3615 with DSM 7.0.1-42218, it works until now that I have make rpload update and fullupgrade. I have decided to make a new virtual usb installation, this time only with rploader update, all seems to work ok, but DMS is not detected on lan. I've made a network scan without success.
Someone with the same problem or any help?
Regards
Hi
Why use q35 in proxmox? It is better than i440fx?
Automated RedPill Loader (ARPL)
in Loaders
Posted
Oh, thx. But where? I cant find correct help topic.