Jump to content
XPEnology Community

gorski

Transition Member
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

 Content Type 

Posts posted by gorski

    sataportmap and diskidx again

    in General Questions

    Posted

    i change this in /etc/synoinfo.conf and /etc.defaults/synoinfo.conf after reboot i have default values except usbportconfig ? what must be reason ?

     

    before reboot
    ash-4.4# cat /etc/synoinfo.conf | grep 'portcfg'
    esataportcfg="0x0000000000"
    internalportcfg="0x000001FE3F"
    usbportcfg="0x00000001C0"
    ash-4.4# cat /etc.defaults/synoinfo.conf | grep 'portcfg'
    esataportcfg="0x0000000000"
    internalportcfg="0x000001FE3F"
    usbportcfg="0x00000001C0"

     

    after reboot

    esataportcfg="0x00"
    internalportcfg="0xffff"
    usbportcfg="0x00000001C0"

     

     

    sataportmap and diskidx again

    in General Questions

    Posted

    easy :)

     0.000000] Command line: withefi earlyprintk syno_hw_version=RS4021xs+ console=ttyS0,115200n8 netif_num=3 pid=0x3379 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac2=A0369F4E8D08 mac3=A0369F4E8D0A mac1=F832E4A093F0 sn=2250T2RCZFQSY vid=0x23a5 elevator=elevato
    r loglevel=15 SasIdxMap=0 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=8 skip_vender_mac_interfaces=0,1,2,3,4,5,6,7 panic=5

     

    sasidxmap is here ...

     

    Screenshot%202024-01-15%20214752.png

    one disk less :) no nice picture in rack panel ... :)

    other ? this /dev/synoboot eat latter .. :)

     

     

     

     

    • Confused 1

    sataportmap and diskidx again

    in General Questions

    Posted

    n

    So.

    I populated port 6 from motherboard sata controler and all in HBA card.

    satamap and driveidxmap are empty

    Command line: withefi earlyprintk syno_hw_version=RS4021xs+ console=ttyS0,115200n8 netif_num=3 pid=0x3379 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac2=A0369F4E8D08 mac3=A0369F4E8D0A mac1=F832E4A093F0 sn=2250T2RCZFQSY vid=0x23a5 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap skip_vender_mac_interfaces=0,1,2,3,4,5,6,7 panic=5

     

    result.same as before

     

    Screenshot%202024-01-15%20175141.png

     

    with

    "SataPortMap": "12",

    "DiskIdxMap": "1000",

    "SasIdxMap: "0"

    "MaxDisks: "24"

     

    get mess :) one disk is missing ... but they count good no holes between

     

    Screenshot%202024-01-15%20180326.png

     

     

     

    "SataPortMap": "86",

    "DiskIdxMap": "0600",

    "SasIdxMap: "0"

     

    result is here ... bad

     

    Screenshot%202024-01-15%20182414.png

    I try and many others 618 816 with no luck :)

     

    sa6300 is not option too

    not see disks

     

    Screenshot%202024-01-15%20171536.png

    bonus pics

     

    20240115_185926.jpg

     

    20240115_190005.jpg

     

    any suggestion ?

    sataportmap and diskidx again

    in General Questions

    Posted

    Hi All,

    I have 2 baremetal machines who work very well ...

    as hardware i have intel sata on motherboard with 6 ports + HBA card with 8 sata ports

    what i need to do to show correct numbering when i preview hdd info page ?

    disk 7 is not available on both machines

    sataportmap=6  diskidxmap=00 in both machines. Using latest DSM

     

     

    Screenshot%202024-01-14%2011535511.pngScreenshot%202024-01-14%201512271.png

    Thanks

    @Peter Suh

    DSM 7.1-42661 Update 2

    in DSM Updates Reporting

    Posted · Edited by gorski

    - Outcome of the update: SUCCESSFUL

    - DSM version prior update: 7.1-42661-1

    - Loader version and model: Tinycore-Redpill v0.9 - DS3617xs

    - Installation type: Baremetal

    - Additional comments: don't forget to run after update tcrp and

    do ./rploader.sh postupdate <yourplatform> else you go to recovery loop  

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    20 hours ago, pocopico said:

     

    Hi can you follow my instructions again ? I think you've got something wrong.

    this happened before day when you change repo links. there is no config.json file in redpill-load/config/DS3622xs+/7.0.1-42218/

    Greets,

    Gorski

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    on ds3617xs real hardware ...

    [  407.151528] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
    [  407.166645] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
    [  411.108241] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
    [  411.123369] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
    [  415.736932] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
    [  415.752075] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
    [  415.777734] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
    [  415.787018] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  415.970677] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
    [  415.979747] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  415.997792] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
    [  416.006877] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  416.053213] md0: detected capacity change from 2549940224 to 0
    [  416.059078] md: md0: set sda1 to auto_remap [0]
    [  416.063644] md: md0 stopped.
    [  416.066555] md: unbind<sda1>
    [  416.074927] md: export_rdev(sda1)
    [  416.085716] md1: detected capacity change from 2147418112 to 0
    [  416.091608] md: md1: set sda2 to auto_remap [0]
    [  416.096164] md: md1 stopped.
    [  416.099075] md: unbind<sda2>
    [  416.104939] md: export_rdev(sda2)
    [  419.127199] md: bind<sda1>
    [  419.130065] md/raid1:md0: active with 1 out of 16 mirrors
    [  419.135783] md0: detected capacity change from 0 to 2549940224
    [  422.144399] md: bind<sda2>
    [  422.147276] md/raid1:md1: active with 1 out of 16 mirrors
    [  422.152980] md1: detected capacity change from 0 to 2147418112
    [  422.336940] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
    [  422.345577] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  422.514835] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
    [  422.664840] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={72} ascii="r"
    [  422.667456] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
    [  422.668419] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  422.688070] <redpill/pmu_shim.c:239> Executing cmd OUT_SCHED_UP_OFF handler cmd_shim_noop+0x0/0x30 [redpill]
    [  422.697966] <redpill/pmu_shim.c:45> vPMU received OUT_SCHED_UP_OFF using 1 bytes - NOOP
    [  422.716069] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
    [  422.724617] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

     

    this is result when i choose ds3617xs_42218.pat and start to install disk station manager

    because of this may be i unable to install ds3617xs ... :) and i not know what to fix that ...

     

    Greets,

    Gorski

     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    1 hour ago, pocopico said:

    Virtual or physical ? 
     

    For virtual you can use sata boot entry while on GRUB

     

    For physical, you can run the following prior building the loader. 

     

    ./rploader.sh identifyusb now 

     

    I do same with DS3615xs and have full success.

     

    and one more question please i have real ds3617xs in home if i use my serial and mac address to my clone nas do i will get working face recognition in synology pictures ?

     

    Greets,

    Gorski

     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    1 hour ago, pocopico said:

    Virtual or physical ? 
     

    For virtual you can use sata boot entry while on GRUB

     

    For physical, you can run the following prior building the loader. 

     

    ./rploader.sh identifyusb now 

     

    baremetal

    all is clean here

    i do

    ./rploader.sh identifyusb broadwell-7.0.1-42218

    ./rploader.sh satamap broadwell-7.0.1-42218

    ./rploader.sh serialgen DS3617xs

    and confirm to add to user_config.json

    after this

    ./rploader.sh ext broadwell-7.0.1-42218 auto

    and here get error for dpkg

    edit runtime.sh

    and do again

    ./rploader.sh ext broadwell-7.0.1-42218 auto

    without errors

    ./rploader.sh build broadwell-7.0.1-42218

    download *.pat file from cache dir on redpill-load and reboot

    booting well

    find loader for 3617xs in find.sinology.com

    use downloaded pat file and get error

     

    what is this with missing dpkg ?

     

    Greets,

    Gorski

     

     

     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    18 hours ago, pocopico said:


    what is the issue you are facing ? You can use tinycore redpill for the loader creation. I have included @buggy25200 3617xs loader. 

     

    I use it! :) ds3615xs rocks all is green but ds3617xs looking for dpkg and tinylinux not have it? If i edit /home/tc/redpill-load/include/runtime.sh and remove dpkg all is green after this and create bootable usb with 3617xs(beta), boot usb found in find.synology.com but pat file is always corrupted ?

    Greets,

    Gorski

     

    20220115_181126.jpg

    20220115_175529.jpg

    20220115_180432.jpg

    20220115_181823.jpg

×
×
  • Create New...