chiquito3
-
Posts
12 -
Joined
-
Last visited
Posts posted by chiquito3
-
-
Hello everyone! I have one PX4-400D and I will love to make it work with. Xpenology Can someone help me please?
-
On 12/26/2020 at 7:32 PM, IG-88 said:
no you dont want to format anything, the recent version of win10 cant hande things properly, the right thing to d is npthing, just use the win10 funktion to unmount the usb device
reads this for more information
I would try it again and let you know. Thanks again for taking the time to help complete noobs like me.
-
Everything I do brings the same results! I get till the same Happy Hacking screen but it stays there forever.
I'm a little frustrated. Any other suggestions?
This is what I'm doing:
1-I downloaded the DS3615 suggested image with loader 1.02b
2-Mount the image and edit the grub file as the image posted here.
3-Flash the modified image to my 32GB Sandisk USB Drive.
4-After the image is burned to the usb drive it ask me to format the drive for it to work so I do format it. There is nothing written about this step so Ihope to be doing it right.
5-Put the usb drive in one of the back ubs ports. I put just one hdd in the nas and then modify the bios to only boot from the usb drive.
6+-the it gets me to the Happy Hacking screen and that is it.
-
17 hours ago, IG-88 said:
- netif_num in grub.cfg is 1 but should be 2
- try both nic ports
- try loader 1.02b 3615 (1.03b does not support uefi, 1.02b does support both)
https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/
- look for a serial port or a onboard connector for com1, the console output is switched to serial port and with this present and a null-modem-cable you could see whats going on
Could you please point me in the right direction to download the correct image?
-
This is what I did:
Please check and let me know if it is correct.
-
1 hour ago, IG-88 said:
having the the real mac address is needed for wake on lan and convenient but its optiinal
the usb vid/pid (of the usb flsh drive used for booting) needs to be in the grub.cfg
if the loader looks like it starts then you would use synology assistant to find it in you network (or you check the dhcp server in you network, usually the internet router)
The thing is that the process stops where it says that the screen will stop updating and the NAS light keeps flashing for a long time and nothing happens.
-
59 minutes ago, flyride said:
That is all that is displayed.
That is usually printed on the card itself. Or you can install it into a regular PC and ipconfig /all search for Physical Address
There was a sticker at the back of the NAS that had de NIC address for both ports.
The thing is I did not know that NIC meaning was Network interface card.
I did put both numbers but the process stays at the beginig and the NAS light keeps flashing.
-
On 12/23/2020 at 6:13 AM, IG-88 said:
where do you have problems with the installation, beside the added notes you follow the tutorial
https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/
you can try to user loader 1.03b 3615 or 3617 and install dsm 6.2.3 the steps are the same as in the tutorial for 6.1
your cpu is old but 64bit capable if you have at least 2GB ram (i guess 4GB is standard) it should work
i have not seen a spec that lists the network chip but most used 1Gbit cips are supported
Thanks for your answer! I managed to make the NAS boot from the USB Drive but is taking very long to finish. There is a message from Jun saying that the screen will stop updating shortly but it keeps going. The NAS has a blinking light.
I did not change the MAC1 in the GRUB file because I do not know where to get the NIC MAC address #1
-
On 5/16/2018 at 9:04 PM, netrider said:
Just installed xpenology with dsm 6.1 (ds3615) with juns loader 1.02b on the PX6-300d (6 drive NAS). Pretty straight forward using this guide to boot from usb.
GUIDE: Customer OS on PX6-300D
1) Had to plug the USB in the back usb port.
2) Entered the PID/VID/SN and mac1 and mac2
3) also required to enter: SataPortMap=6
After that it booted right up and installed DSM with the synology assistant. Working good so far with no issues and all 6 bays can be utilized.
Netrider
Could you help me install this Xenology on my LenovoEMC PX4-400D?
-
Could someone here explain how to install Xpenology on my LenovoEMC PX4-400D using a usb drive?
-
Hi! I just registered here. I'm curious for using this Xpenology on my LenovoEMC PC4-400D. Could someone here point me in the right direction?
-
1
-
Can I use a Lenovo ThinkCentre M720e for a Xpenology project?
in The Noob Lounge
Posted
I have an old Lenovo ThinkCentre M720e, and I am wondering if the hardware in the machine can run Xpenology as it is.
Here is a link for the specifications of the machine:
https://psref.lenovo.com/syspool/Sys/PDF/ThinkCentre/ThinkCentre_M720e_SFF/ThinkCentre_M720e_SFF_Spec.pdf
Key Features
2.9 GHz Intel Core i5-9400 Six-Core
8GB DDR4 2666 MHz DDR4 RAM
Integrated Intel UHD Graphics 630
1TB 7200 rpm Hard Drive
SuperMulti DVD Burner
1 x Gigabit Ethernet Port
4 x USB 3.1 Gen 1 | 2 x USB 2.0 | Serial
Wired USB Keyboard & Mouse Included
Trusted Platform Module
Windows 10 Pro (64-Bit) (updated to Windows 11)