chiquito3
Transition Member-
Posts
12 -
Joined
-
Last visited
Everything posted by chiquito3
-
I have an old Lenovo ThinkCentre M720e, and I am wondering if the hardware in the machine can run Xpenology as it is. Here is a link for the specifications of the machine: https://psref.lenovo.com/syspool/Sys/PDF/ThinkCentre/ThinkCentre_M720e_SFF/ThinkCentre_M720e_SFF_Spec.pdf Key Features 2.9 GHz Intel Core i5-9400 Six-Core 8GB DDR4 2666 MHz DDR4 RAM Integrated Intel UHD Graphics 630 1TB 7200 rpm Hard Drive SuperMulti DVD Burner 1 x Gigabit Ethernet Port 4 x USB 3.1 Gen 1 | 2 x USB 2.0 | Serial Wired USB Keyboard & Mouse Included Trusted Platform Module Windows 10 Pro (64-Bit) (updated to Windows 11)
-
Hello everyone! I have one PX4-400D and I will love to make it work with. Xpenology Can someone help me please?
-
I would try it again and let you know. Thanks again for taking the time to help complete noobs like me.
-
Everything I do brings the same results! I get till the same Happy Hacking screen but it stays there forever. I'm a little frustrated. Any other suggestions? This is what I'm doing: 1-I downloaded the DS3615 suggested image with loader 1.02b 2-Mount the image and edit the grub file as the image posted here. 3-Flash the modified image to my 32GB Sandisk USB Drive. 4-After the image is burned to the usb drive it ask me to format the drive for it to work so I do format it. There is nothing written about this step so Ihope to be doing it right. 5-Put the usb drive in one of the back ubs ports. I put just one hdd in the nas and then modify the bios to only boot from the usb drive. 6+-the it gets me to the Happy Hacking screen and that is it.
-
Could you please point me in the right direction to download the correct image?
-
The thing is that the process stops where it says that the screen will stop updating and the NAS light keeps flashing for a long time and nothing happens.
-
There was a sticker at the back of the NAS that had de NIC address for both ports. The thing is I did not know that NIC meaning was Network interface card. I did put both numbers but the process stays at the beginig and the NAS light keeps flashing.
-
Thanks for your answer! I managed to make the NAS boot from the USB Drive but is taking very long to finish. There is a message from Jun saying that the screen will stop updating shortly but it keeps going. The NAS has a blinking light. I did not change the MAC1 in the GRUB file because I do not know where to get the NIC MAC address #1
-
Netrider Could you help me install this Xenology on my LenovoEMC PX4-400D?
-
Could someone here explain how to install Xpenology on my LenovoEMC PX4-400D using a usb drive?
-
Hi! I just registered here. I'm curious for using this Xpenology on my LenovoEMC PC4-400D. Could someone here point me in the right direction?