ooooooh
-
Posts
41 -
Joined
-
Last visited
Posts posted by ooooooh
-
-
12 minutes ago, IG-88 said:
und die gleiche vm (mitgleichem win10 build) lief mit dsm 6.2 besser?
du könntest noch versichen neuere virtio treiber von hier zu installieren
man könnte auch versichen du qemu konfig der alten version in dsm 6.2 mit der von dsm 7 zu vergleichen, das ist aber dann doch etwas arbeit da man sich dann auch intensiver mit qemu beschäfiten muss
ja, die selbe VM lief unter 6.2 um *welten besser, gar kein vergleich !
es ist so als ob alles in zeitlupe ablaufen würde. irgendetwas beisst sich, nur was !?
ich hatte die neusten virtio drv's ausprobiert, dev, stable, nightly ... keine änderung.
sage ja, selbst das installieren ist quasi nicht machbar 🤨 , da alles in zeitlupe bei:
i5 10500 4.50 GHz - 64gb ddr4 2666mhz ram - ssd . . . , das kann nicht sein.
-
On 12/9/2022 at 7:58 PM, IG-88 said:
Synology VMM Guest Tool installiert?
bei den vielen spielereien in win10 ..., versuch mal ob die gui besser wird wenn du einige effekte abschaltest
wenn mir das mit dem windows wichtig wäre würde ich eher einen hypervisor wie esxi oder proxmox auf der hardware laufen lassen und dsm als vm laufen lassen, das gibt sicher die bessere leistung, syno's vmm ist keine gute lösung wenn es vor allem um vm's geht, da würde man lieber zu docker greifen
und meist (bei dir ja nicht ist die nas hardware eher schmal ausgelegt (vor allem syno's consumer hardware) so das so schon problematisch wird, be dem was man so ließt arbeiten programme aber im hintergrund eines windows ganz ok, ist nur nicht so als ersetz für einen desktop geeignet
ich würde vermuten das einen ssd auch etwas hilf das es sich schneller anfühlt (aber bei der gui an sich wird das sicher nicht helfen)
@ig-88 danke dir für den response!
nun windows ist abgespeckt und lief ja vorher auch super perfomant, es ist die selbe konfig.
die vm's laufen auf SSD's und die guest tools sind installiert, auch mit verschiedenen vers. probiert.
das mit proxmox und co. ist mir zu unbekannt, so war es eigntl. gut nur seit DSM v7 will es nicht mehr so richtig mit Win10/11
bin da wirklich mit dem Latein am ende...
-
hi
ich nutze mein xpenology überwiegend als host für meine VM's, mein system wie folgt:
i5 10500 - 64gb ram - msi b460m - 4platten -> 2x raid1
das ganze seit neustem mit dem Automated RedPill Loader beta3.
soweit läuft auch alles ohne Auffälligkeiten, jedoch gibt es ein Performance Problem:
die win7 und win8.1 VM's laufen sehr performant auf dem system, aber die Windows 10/11
Installationen sind extrem langsam, nicht wirlich nutzbar.
das beginnt schon bei der installation die super träge ist. kein vergleich zu den win7/8.1 installationen.
was mich wundert das es mit jun's loader hierbei keine probleme gab...
woran könnte das liegen ?
-
bei Win10 mit 3617xs mit muss im VM manager
aktiveren, ansonsten läuft w10/w11 nicht ,weder beim install noch später.
das liegt an dem kernel von 361*xs.
bei importierten VM's muss man im nachhinein, diese option aktivieren.
mit dem kernel von 918+ läuft alles.
-
On 11/24/2021 at 8:49 PM, IG-88 said:
habe ich noch nie gehört
im handbuch habe ich auf sowas absonderliches auch nichts gefunden
check mal diese einstellung wenn du mit csm aktiv gebootet hast
außrdem kannst du noch mit den "option rom" einstellungen rumspielen (abschalten(einschalten)
schon alles probiert, keine chance. man kann ohne externe graka das CSM nicht aktivieren
also eine einfache pci graka besorgt = NV G210, mit karte gebootet
dann im bios CSM eingeschaltet.
Läuft !
runtergefahren, karte entfernt monitor an internen vga/dvi an schluss angeschlossen.
was soll ich sagen, läuft auch jetzt 🤔
- 1
-
hmm,
habe selber ein asrock H410M- HDV/M2 mainboard, eben mit der i5 10400.
leider kann ich das nicht auf CSM umstellen, da er dann eine PCIe Graka erwartet
und die graka einheit der cpu ignoriert !?
deshalb frage ich mich, wie @smileyworld das hinbekommen hat ...
ansonsten ist die größe des mb egal.
-
Will mir ein neues System aufbauen.
CPU liegt vor: Intel I5 10400 , 6Cores/12Threads
Am liebsten eines auf basis DS3617xs wegen der Anzahl der Cores der CPU.
Das soll jedoch nur mit aktivem CSM im Bios der MB gehen.
Welches Mainboard bietet mir diese Option, oder hat jemand eine solche (oder ähnliche CPU ) schon am laufen mit DS3617s ?
🤔
-
With ch_cpuinfo Patch, which found here 😀
-
keinen seperaten controller.
ich denke als admin drauf. ..
bei mir ist es es das "volume1"
und dann das hier " sudo btrfs check --repair /dev/volume1 "
?
-
-
-
hi all,
i us the v1.04b loader for the 918+.
running a acer board with 8gb ddr3 ram, Intel Core i5-4440 haswell with onboard Realtek PCIe GBE Network Family Controller.
it's running grat so far, but i want to update to 6.2.2-24922.
if i do this, it will brick, an my nas will not availible. i try'd it.
HOW to do this ?
-
well... i try'd a lot again, nothing help'd me 😟
so i try'd a new usb stick, usv v2, micro. -> first try: it work'd !?!
but why, the three used usb sticks works all great with 918 and 3617xs 1.02b loader ... but not with 3617xs 1.03b loader THIS can't be, or !?!
anyway the beast is now online, great pice of SRV.
powerfull and very low energy consumption: IDLE <20w (2x2drive's, all 2.5", 2x ssd, 2x hdd) with 2 VM running an working about 28w :
thank you both for your info's and help : IG-88 / flyride
-
6 hours ago, IG-88 said:
the part where you also have to use the right boot device was the part a stumbled
after activation of CSM i had to save bios and reboot, go into bios to see the now 3rd usb boot device (the other two started with uefi and the the name of the boot device), than had to make the "non uefi" usb device 1st boot device and save this
i will give this a try.
-
11 minutes ago, flyride said:
Generally modern Intel hardware should be compatible. Since you have a CT card, try BIOS disabling your on-board LAN.
Also, Sometimes DS3617xs has problems, try DS3615xs and see if it works. I realize you want all 12 threads to work, but you will lose very little if you turn off Hyperthreading.
i disabeld the onboard nic and tryd ds3615xs aswell, no go.
current i use 918 which works great, but only with the real 6 cores, ht disabled.
any other suggestions ?
or is it possible to modify the 918 kernel for use more then 8 cores ?
-
2 hours ago, flyride said:
Did you change to Legacy (non-EFI) boot?
yes
-
hi all,
i try this combination:
- DS3517xs v1.03b with i7 8700 on Gigabyte H310M
- NIC is the onboard one and i have a Intel Gigabit CT Destop NIC
DS3517xs because of the number of maximum cores, the i7 8700 has 6Cores / 12Threads
and v1.03b for update to DSM 6.2xxxx an higher if possible.
i get to work with loader v1.02 and v1.04 , but i don't get it to work with v1.03b, why ?
After setup the USB bootstick with v1.03b, i can't find the Diskstation...
-
Question:
Will this work with AMD Ryzen CPU's aswell ?
-
4 hours ago, IG-88 said:
8 aber du könntest auch den link anklicken den ich geposet habe, entscheidend wäre das
https://xpenology.com/forum/topic/24377-dell-r520/?do=findComment&comment=130630
das heißt, dass wenn man einen i7 8700 nutzrn wollte, 3617 mit 1.03 nehnen müsste...
-
10 hours ago, IG-88 said:
solltest du 918+ wegen m.2 in betracht gezogen haben dann wird das nichts, da verlierst du die hälfte der cores die dann nicht benutzt werden
hmm,
wie viele Cores / Threads kann die 918+ denn max. nutzen ?
-
hi,
habe mir ein anderes gehäuse gekauft, daher sind die teile nun übrig.
die einzelnen teile laufen perfekt mit xpenology zusammen (als 918+).
CPU Intel i5 7400
Mainboard Gigabyte GA110M DS2 (4xsata)
Gehäuse KOLINK Satellite Mini-ITX / Micro-ATX
Ich könne das Verschicken, aber abholung wäre mir eignl. lieber (NRW, Kreis Wesel)
Bei Intresse, macht mir per PM bitte angebote, VHB: 180€ zusammen.
-
-
- Outco me of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 3
- Lo ader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Gigabyte GA-H110m DS2 - i7 6700
- Additional comments: restart + shutdown Ok, onboard NIC disabled, Intel PRO 1000 NIC, CPU Temperature not shown (always at 40°)
-
- Outco me of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922
- Lo ader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Gigabyte GA-H110m DS2 - i7 6700
- Additional comments: restart + shutdown Ok, onboard NIC disabled, Intel PRO 1000 NIC, CPU Temperature not shown (always at 40°)
DSM v7.xx - Virtual Machine Manager - auf
in GERMAN
Posted
kann ich testen.
ich sehe grade das es ein neuen loader gibt: TinnyCore RedPill (TCRP) beta v.0.9
hat das einen einfluß auf den VM Manager ? (denke nicht)