[Plex app problems]

Did you reboot the server after removing Plex? It looks like this may be necessary to remove some residual pieces of Plex before a re-install....

 

https://forums.plex.tv/index.php/topic/ ... ology-nas/

[Plex app problems]

Have you taken a look at the Plex log file?

 

http://forum.synology.com/enu/viewtopic ... 93&t=72034

 

I got a similar error from SABNZBD, SickBeard and Couchpotato whilst playing around with permissions for Couchpotato renaming...

 

https://couchpota.to/forum/viewtopic.php?f=6&t=1477

 

However I suspect that my issue is caused by my lack of reboot (i'm in the middle of an SHR expansion at the moment)

[Dont see any thnx button, thread ?]

+1

[N54L + XPEnlogy]

You can't install DSM without disks attached. DSM needs to be installed to the disk(s).

[Currently Have DS413 - Now looking to build]

The extra grunt would be for Plex to transcode video streams. An HP N54L will struggle to transcode a 1080p stream.

[N54L + XPEnlogy]

1- 6 drives is possible, basically, you need to...

 

- Run an eSATA to SATA cable from the back of the box, through a blanking plate and into the top drive bay.

- Get a molex to dual SATA power cable.

- Find some way of mounting two drives (I used one of these: http://www.frozencpu.com/products/15856 ... 0-AKS.html)

- Upgrade the BIOS to one of the hacked versions to enable the eSATA/ODD to run at full speed (emulates IDE otherwise).

 

2 - For DSM, you'll have to format the drives.

3 - There's plenty of info on the net about this already.

4 - See the nanoboot instructions on the forum.

 

BTW, i'm not running DSM on my N36L yet - the above setup was for WHS2011. I plan on building a new server for DSM, migrating the data to it and then rebuilding the N36L with DSM as well.

[Nanoboot and VID / PID changing]

syslinux.cfg should be in the \boot\syslinux directory on your USB memory stick. On Windows, you can use USBDEView to find out the VID and PID of your memory stick: http://www.nirsoft.net/utils/usb_devices_view.html