gatsu_1981
-
Posts
15 -
Joined
-
Last visited
Posts posted by gatsu_1981
-
-
On 7/12/2020 at 11:42 AM, IG-88 said:
vague reference, are you talking about 6.2.2 (jun's i915 driver) and 6.2.3 (synology's own newer i915 driver - initially made for the newer gemini lake x20 units)
With 6.2.2 I was just using JUN loader, I did not require more packages
On 7/12/2020 at 11:42 AM, IG-88 said:the "mod" i915 driver only contains a small patch to replace the hardware id of 8086:3E92 (9th gen CPU) with the id of newer cpu'd id using the "same" UHD630 iGPU, nothing related to your older iGPU is changed, in theory a fresh install with loader 1.04b and my newer 6.2.3 extra/extra2 (0.11 and newer) should result in a working /dev/dri
I understand that.
But, on 6.2.2, I already had /dev/dri populated, and I already had a valid S/N for Synology. But, using Jellyfin (or videostation) and then doing a video seek resulted in a immediate NAS reset.
Now it's not resetting anymore, on 6.2.3 with patched extra/extra2.
On 7/12/2020 at 11:42 AM, IG-88 said:on 6.2.2 there where two i915 versions the one from synology not supporting anything above apollo lake and jun's i915 made from newer source with support up to 9th gen cpu's
with 6.2.3 synology replaced its older driver with a newer source similar to jun's version and might had a few more optimizations and tweaks to compensate some quirks in it so its working for all cases instead of the situation on 6.2.2 where the two i915 drivers had different sweet spots (like apollo lake better to be used with synology's driver)
jun might have had a harder job (and limitations) with his i915 driver as he could not change the kernel, everything needed to be in the driver to fit synology's 4.4.59 kernel
with 6.2.3 synology synology changed some things in its 4.4.59 kernel for a better fit of the i915 code they where using and broke jun's i915 driver on the way
the result with 6.2.3 is still pleasing a all hardware now woks as before but with the stock driver from synology
It absolutely have to do with some optimization on latest driver.
I did not change anything in my configuration, EFI/bios or something else.Just did a DSM update, then updated with extra/extra2, and now everything is working as it should have been working.
-
12 hours ago, IG-88 said:
use the extra/extra2 from the 1st post?
if you come from a former version containing jun's extra/extra2 an his i915 driver this driver will not work with the kernel from 6.2.3 and the driver will also prevent the new one from synology to be loaded
also in the 1st post is a list of supported pid's from synology's driver, 0412 is in that list
there should be no i915.ko in /usr/lib/modules/update/
Thanks.
Last synology version was natively compatible with my graphic card, but this one was not.
So I used the modded driver, and now I have /dev/dri back.Moreover, I don't know if you remember, but I had huge problems using hw acceleration in the previous DSM release: it worked when starting a new video, but if I skipped the accelerated video even once the NAS rebooted.
Now it's perfectly working, I checked with JellyFin and with Video Station.
Disabled: 50/85% CPU, on mine (a quad core i5 25w cpu)Enabled: 15/25% CPU.
I had to plug a HDMI dummy plug in my NAS because network was not enabled on boot on previous release, I will test this issue too.
Regards
-
Hi, do you have any suggestion?
I had /dev/dri in the previous DSM release, but the folder disappeared after upgrading to 6.2.3.
I've got an old haswell hd graphics 4600, with PCI ID 8086:0412.
My cpu: https://ark.intel.com/content/www/us/en/ark/search.html?_charset_=UTF-8&q=i5-4460T
-
3 hours ago, Huberer said:
Post a screen shot of the boot options from your bios. I think your thumb drive is not in the first place.
Reboots come from attached video-cable (hdmi/dvi)
Gesendet von iPhone mit TapatalkHi, I will post it later but I'm almost sure that the boot drive is the first (and only the one enabled) boot drive.
I'm almost sure it's the only one, and it is in efi mode.
It has surely something to do with video cable, since I had to buy a dummy HDMI adapter, otherwise the Synology won't come up online after a reboot.
-
It will create /dev/dri everytime and hardware encoding starts, but then it reboot when I skip the video in the web player.
It is very noticeable that it is actually working, since quality is very high, I tried with hw encoding off and quality was not as good.
Don't you have any suggestions like disabling something in the BIOS?
-
2 hours ago, IG-88 said:
imho 1st thing to try would be jun's loader with its original drivers and dsm 6.2.0 aka 23824
if it does not work with this version there are other problems
In fact that was the first thing I tried
-
8 hours ago, Olegin said:
Read this
I think that you could help me to try to exclude some culprit, maybe you can post your BIOS/EFI configuration? What to disable?
We have exactly the same GPU / architecture (mine is Haswell refresh, your Haswell first gen). -
On 2/25/2020 at 10:49 AM, gatsu_1981 said:
Hi, before starting I want to thank everyone for their efforts.
I used xpenology on my old Asrock J2900-based NAS for at least 5 years, but now I'm struggling with my new(ish) system.
My CPU is a 4460T (35w TDP, Haswell refresh) and it has got an integrated HD 4600 GPU.
Network works fine since it's Realtek r8111 based.
I need a beefier CPU (so I bought the i5 instead of the Celeron J3455) since I have a ton of dockers on the NAS.
But I really would like to get hw transcoding working, since I have a lot of HEVC content.
I have a couple of problems, the main one is that it reboot when I try to see a video in Video Station on my browser with HW acceleration enabled.
Video starts and encoding works very well, but I can't touch the slider: as soon as i stop the movie or move the slider my system instantaneosly reboot.
Nothing in logs, no sign of kernel crash or memory errors, it just reboots.
My conditions:
- real mac / serial combo, took from a dead unit, I even have synology.me working
- jun's loader 1.04b, version for ds918+
- /dev/dri is populated:
cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc","mpeg4part2_dec","aac_dec","aac_enc","hevc_dec","vc1_dec","vc1_enc","ac3_dec","mpeg4part2_enc"],"token":"d686df0830fa070505494ed7d9787fa2"}Other problems:
- my system will not boot without HDMI connected
How can I solve it? I tried the slimmed down driver extension (1.5mb) from another thread but it seems to did nothing.
I tried your driver extension (extra918plus_v0.8_syno.zip). Same issue, just reboots.
I even tried to chmod 777 /dev/dri content.
Which version would you suggest to an Haswell user?
-SNIP-
9 hours ago, IG-88 said:that kind of very specific to some boards or vendors and might even be seen with other linux systems too
(at least i remember reading about hdmi dummy plugs needed for some systems elsewhere)
and if it needs some kernel tweaking its clear we can't do it as the kernel comes fix from synology with dsm and also we dont have the source from the backported i915 driver (jun has not made this one public, he just used it for creating its loader modules)
Hi @IG-88 what do you think of my problem? syno works, STD crash on boot (diskstation becomes unreachable), recovery obviously works but no hw acceleration.
On my config I don't have error in logs, just keeps rebooting when skipping videos while using HW transcoding in video station.
-
1 hour ago, Olegin said:
Read this
Hi, already tried.
Syno version has the same effect as standard loader version, it creates /dev/dri but it reboots when skipping a video with hw acceleration enabled.
STD version will not boot correctly: my diskstation get "pingable" but it will not respond to web interface, putty etc.
Recovery version would be useless to test, since I want to have HW acceleration working without random reboots
-
On 1/31/2020 at 5:48 AM, Olegin said:
Transcoding work's on intel processors from 4th generation (Haswell) or later with GPU on board.
Hi,
I have instantaneous reboot on Haswell CPU (35w i5 4460T).
Not random, it just reboots EVERY TIME I touch the slider while viewing a Video station content on the web browser player.
Power supply is generous (750w), I tried two of them.
Can you please help me? I have posted here too:
-
Hi, before starting I want to thank everyone for their efforts.
I used xpenology on my old Asrock J2900-based NAS for at least 5 years, but now I'm struggling with my new(ish) system.
My CPU is a 4460T (35w TDP, Haswell refresh) and it has got an integrated HD 4600 GPU.
Network works fine since it's Realtek r8111 based.
I need a beefier CPU (so I bought the i5 instead of the Celeron J3455) since I have a ton of dockers on the NAS.
But I really would like to get hw transcoding working, since I have a lot of HEVC content.
I have a couple of problems, the main one is that it reboot when I try to see a video in Video Station on my browser with HW acceleration enabled.
Video starts and encoding works very well, but I can't touch the slider: as soon as i stop the movie or move the slider my system instantaneosly reboot.
Nothing in logs, no sign of kernel crash or memory errors, it just reboots.
My conditions:
- real mac / serial combo, took from a dead unit, I even have synology.me working
- jun's loader 1.04b, version for ds918+
- /dev/dri is populated:
root@DS918:~# ls -la /dev/dri/ total 0 drwxr-xr-x 2 root root 100 Feb 25 09:49 . drwxr-xr-x 11 root root 18880 Feb 25 09:49 .. crw-rw---- 1 root video 226, 0 Feb 25 09:50 card0 crw-rw---- 1 root video 226, 64 Feb 25 09:50 controlD64 crw-rw---- 1 root video 226, 128 Feb 25 09:50 renderD128cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc","mpeg4part2_dec","aac_dec","aac_enc","hevc_dec","vc1_dec","vc1_enc","ac3_dec","mpeg4part2_enc"],"token":"d686df0830fa070505494ed7d9787fa2"}Other problems:
- my system will not boot without HDMI connected
How can I solve it? I tried the slimmed down driver extension (1.5mb) from another thread but it seems to did nothing.
I tried your driver extension (extra918plus_v0.8_syno.zip). Same issue, just reboots.
I even tried to chmod 777 /dev/dri content.
Which version would you suggest to an Haswell user?
root@DS918:~# tail -f /var/log/dmesg [Tue Feb 25 09:49:34 2020] usbserial: USB Serial support registered for cp210x [Tue Feb 25 09:49:34 2020] usbcore: registered new interface driver pl2303 [Tue Feb 25 09:49:34 2020] usbserial: USB Serial support registered for pl2303 [Tue Feb 25 09:49:34 2020] pl2303 1-8.2:1.0: pl2303 converter detected [Tue Feb 25 09:49:34 2020] usb 1-8.2: pl2303 converter now attached to ttyUSB0 [Tue Feb 25 09:49:34 2020] usbcore: registered new interface driver ch341 [Tue Feb 25 09:49:34 2020] usbserial: USB Serial support registered for ch341-uart [Tue Feb 25 09:49:34 2020] usbcore: registered new interface driver ti_usb_3410_5052 [Tue Feb 25 09:49:34 2020] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [Tue Feb 25 09:49:34 2020] usbserial: USB Serial support registered for TI USB 5052 2 port adapter root@DS918:~# tail -f /var/log/messages 2020-02-25T10:08:10+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:08:24+01:00 DS918 ddnsd: SYSTEM: Last message 'proxy_internal_lib_c' repeated 1 times, suppressed by syslog-ng on DS918 2020-02-25T10:08:24+01:00 DS918 synoscgi_SYNO.Core.Package.Server_2_list[10172]: pkgcurltool.cpp:474 http://packages.synocommunity.com/, Failed to request packages, httpResponseCode=502 2020-02-25T10:08:24+01:00 DS918 synoscgi_SYNO.Core.Package.Server_2_list[10172]: pkgcurltool.cpp:474 http://packages.synocommunity.com/, Failed to request packages, httpResponseCode=502 2020-02-25T10:08:25+01:00 DS918 synoscgi_SYNO.Core.Package.Server_2_list: SYSTEM: Last message 'pkgcurltool.cpp:474 ' repeated 1 times, suppressed by syslog-ng on DS918 2020-02-25T10:08:25+01:00 DS918 ore.Package.Server_1_check: pkgcurltool.cpp:474 http://packages.synocommunity.com/, Failed to request packages, httpResponseCode=502 2020-02-25T10:08:25+01:00 DS918 ore.Package.Server_1_check: pkgcurltool.cpp:474 http://packages.synocommunity.com/, Failed to request packages, httpResponseCode=502 2020-02-25T10:23:45+01:00 DS918 kernel: [ 2084.925651] Bluetooth: Failed to add device to auto conn whitelist: status 0x0c 2020-02-25T10:54:45+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:54:45+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:57:28+01:00 DS918 synoscgi_SYNO.VideoStation2.Controller.Device_1_list[9595]: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:57:30+01:00 DS918 synoscgi_SYNO.VideoStation2.Streaming_2_open[9669]: json_utils.cpp:147 Failed to parse json file [/tmp/VideoStation/enabled] 2020-02-25T10:58:32+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:58:32+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:58:33+01:00 DS918 ddnsd: SYSTEM: Last message 'proxy_internal_lib_c' repeated 1 times, suppressed by syslog-ng on DS918 2020-02-25T10:58:33+01:00 DS918 ore.Package.Server_1_check: pkgcurltool.cpp:474 http://packages.synocommunity.com/, Failed to request packages, httpResponseCode=502 2020-02-25T10:58:33+01:00 DS918 ore.Package.Server_1_check: pkgcurltool.cpp:474 http://packages.synocommunity.com/, Failed to request packages, httpResponseCode=502 2020-02-25T10:58:45+01:00 DS918 ore.Package.Server_1_check: SYSTEM: Last message 'pkgcurltool.cpp:474 ' repeated 1 times, suppressed by syslog-ng on DS918 2020-02-25T10:58:45+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:58:46+01:00 DS918 ddnsd: proxy_internal_lib_conf.c:106 Create file or directory failed 2020-02-25T10:58:53+01:00 DS918 ddnsd: SYSTEM: Last message 'proxy_internal_lib_c' repeated 1 times, suppressed by syslog-ng on DS918 2020-02-25T10:58:53+01:00 DS918 synoscgi_SYNO.VideoStation2.Controller.Device_1_list[11850]: proxy_internal_lib_conf.c:106 Create file or directory failed -
Hi, I just want to thank everyone with this piece of software.
I used a lot of time on an old Asrock Q2900 ITX, now I bought a new(ish) MSI H81i for using hw acceleration and having a better system.
My CPU is a 4460T (35w TDP, Haswell refresh) and it has got an integrated HD 4600 GPU.
Network works fine since it's Realtek r8111 based.
I have a couple of problems, the main one is that it reboot when I try to see a video in Video Station on my browser with HW acceleration enabled.
It starts and encoding works, but as soon as i stop it or move the slider my system reboot.
My conditions:
- real mac / serial combo, took from a dead unit, I even have synology.me working
- jun's loader 1.04b, for ds918+
- /dev/dri is populated
cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc","mpeg4part2_dec","aac_dec","aac_enc","hevc_dec","vc1_dec","vc1_enc","ac3_dec","mpeg4part2_enc"],"token":"d686df0830fa070505494ed7d9787fa2"}Other problems:
- my system will not boot without HDMI connected
How can I solve it? I tried some
-
Hello, does it use turbo frequency? I see my i5-4460T limited from 800 to 1900mhz, never going up to 2.7ghz.
-
Hello,
Today I tried to use my USB Zigbee device with xpenology ( hxxps www.amazon.it/gp/product/B00MWAH784/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 )
It was working quite well for a fey years, some months ago I updated it to new june loader and DSM.
Now I'm on:
DS3615xs
DSM 6.1.7-15284 Update 1
2018/06/21
Everything works good, but now I realized that USB is dead.
I cannot mount USB drives anymore, some problems lie down here:
Spoiler[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.102 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15284 SMP Thu Jun 21 00:42:18 CST 2018 [ 0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1430LWN015172 mac1=0011320C2FC5 netif_num=1 vid=0x0951 pid=0x1665 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b5570fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b5571000-0x00000000b55a0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b55a1000-0x00000000b55f4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b55f5000-0x00000000b5705fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b5706000-0x00000000b5a79fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5a7a000-0x00000000b5a7afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b5a7b000-0x00000000b5abcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5abd000-0x00000000b5c2afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b5c2b000-0x00000000b5ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5ffa000-0x00000000b5ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q2900-ITX, BIOS P1.10 10/31/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0B6800000 mask FFF800000 uncachable [ 0.000000] 3 base 0B7000000 mask FFF000000 uncachable [ 0.000000] 4 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820: update [mem 0xb6800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xb6000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6c0-0x000fd6cf] mapped at [ffff8800000fd6c0] [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE [ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE [ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0xb5570fff] [ 0.000000] [mem 0x20100000-0x201fffff] page 4k [ 0.000000] [mem 0x20200000-0xb53fffff] page 2M [ 0.000000] [mem 0xb5400000-0xb5570fff] page 4k [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xb55a1000-0xb55f4fff] [ 0.000000] [mem 0xb55a1000-0xb55f4fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb5a7a000-0xb5a7afff] [ 0.000000] [mem 0xb5a7a000-0xb5a7afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb5abd000-0xb5c2afff] [ 0.000000] [mem 0xb5abd000-0xb5c2afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb5ffa000-0xb5ffffff] [ 0.000000] [mem 0xb5ffa000-0xb5ffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37064000-0x37829fff] [ 0.000000] ACPI: RSDP 0x00000000000F04A0 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000B567B080 0007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000B56862E0 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000B567B190 0B150 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000B5705F80 00040 [ 0.000000] ACPI: APIC 0x00000000B56863F0 00084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000B5686478 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000B56864C0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: LPIT 0x00000000B5686500 00104 (v01 ALASKA A M I 00000003 VLV2 0100000D) [ 0.000000] ACPI: AAFT 0x00000000B5686608 000FF (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000B5686708 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000B5686740 00763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000B5686EA8 00290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000B5687138 0017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000B56872B8 00042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b800000-ffff88013effffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009bfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20100000-0xb5570fff] [ 0.000000] node 0: [mem 0xb55a1000-0xb55f4fff] [ 0.000000] node 0: [mem 0xb5a7a000-0xb5a7afff] [ 0.000000] node 0: [mem 0xb5abd000-0xb5c2afff] [ 0.000000] node 0: [mem 0xb5ffa000-0xb5ffffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1005013 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10102 pages used for memmap [ 0.000000] DMA32 zone: 738874 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] res level lint[0x27]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low res lint[0xde]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0xde]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl res lint[0xc2]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 103 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020100000 [ 0.000000] PM: Registered nosave memory: 00000000b5571000 - 00000000b55a1000 [ 0.000000] PM: Registered nosave memory: 00000000b55f5000 - 00000000b5706000 [ 0.000000] PM: Registered nosave memory: 00000000b5706000 - 00000000b5a7a000 [ 0.000000] PM: Registered nosave memory: 00000000b5a7b000 - 00000000b5abd000 [ 0.000000] PM: Registered nosave memory: 00000000b5c2b000 - 00000000b5ffa000 [ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 00000000e00f8000 [ 0.000000] PM: Registered nosave memory: 00000000e00f8000 - 00000000e00f9000 [ 0.000000] PM: Registered nosave memory: 00000000e00f9000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed02000 [ 0.000000] PM: Registered nosave memory: 00000000fed02000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] e820: [mem 0xb6000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88013fc00000 s69376 r8192 d20736 u524288 [ 0.000000] pcpu-alloc: s69376 r8192 d20736 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991250 [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1430LWN015172 mac1=0011320C2FC5 netif_num=1 vid=0x0951 pid=0x1665 [ 0.000000] Power on seq num: 0 [ 0.000000] Synology Hardware Version: DS3615xs-j [ 0.000000] Vender format version: 2 [ 0.000000] Serial Number: 1430LWN015172 [ 0.000000] Mac1: 0011320C2FC5 [ 0.000000] Internal netif num: 1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3870988k/5242880k available (4814k kernel code, 1222828k absent, 149064k reserved, 3793k data, 760k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 16252928 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.002000] tsc: PIT calibration matches HPET. 1 loops [ 0.002000] tsc: Detected 2416.669 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4833.33 BogoMIPS (lpj=2416669) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000052] Security Framework initialized [ 0.000062] AppArmor: AppArmor initialized [ 0.000076] Mount-cache hash table entries: 256 [ 0.000293] Initializing cgroup subsys memory [ 0.000310] Initializing cgroup subsys devices [ 0.000313] Initializing cgroup subsys freezer [ 0.000316] Initializing cgroup subsys blkio [ 0.000345] CPU: Physical Processor ID: 0 [ 0.000347] CPU: Processor Core ID: 0 [ 0.000351] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.005115] mce: CPU supports 6 MCE banks [ 0.005125] CPU0: Thermal monitoring enabled (TM1) [ 0.005132] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.005217] Freeing SMP alternatives: 24k freed [ 0.005228] ACPI: Core revision 20130328 [ 0.015409] ACPI: All ACPI Tables successfully acquired [ 0.016450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.026462] smpboot: CPU0: Intel(R) Pentium(R) CPU J2900 @ 2.41GHz (fam: 06, model: 37, stepping: 08) [ 0.026472] TSC deadline timer enabled [ 0.026482] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. [ 0.026490] ... version: 3 [ 0.026492] ... bit width: 40 [ 0.026494] ... generic registers: 2 [ 0.026495] ... value mask: 000000ffffffffff [ 0.026497] ... max period: 000000007fffffff [ 0.026499] ... fixed-purpose events: 3 [ 0.026500] ... event mask: 0000000700000003 [ 0.026838] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.682609] Brought up 4 CPUs [ 0.682614] smpboot: Total of 4 processors activated (19333.35 BogoMIPS) [ 0.683093] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.683459] devtmpfs: initialized [ 0.683873] PM: Registering ACPI NVS region [mem 0xb55f5000-0xb5705fff] (1118208 bytes) [ 0.684099] xor: measuring software checksum speed [ 0.693621] prefetch64-sse: 8364.000 MB/sec [ 0.703642] generic_sse: 7516.000 MB/sec [ 0.703645] xor: using function: prefetch64-sse (8364.000 MB/sec) [ 0.703715] NET: Registered protocol family 16 [ 0.704573] ACPI: bus type PCI registered [ 0.704818] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.704823] PCI: not using MMCONFIG [ 0.704825] PCI: Using configuration type 1 for base access [ 0.714452] bio: create slab <bio-0> at 0 [ 0.730804] raid6: sse2x1 gen() 605 MB/s [ 0.747776] raid6: sse2x1 xor() 2458 MB/s [ 0.764832] raid6: sse2x2 gen() 1023 MB/s [ 0.781844] raid6: sse2x2 xor() 2929 MB/s [ 0.798912] raid6: sse2x4 gen() 1832 MB/s [ 1.468067] raid6: sse2x4 xor() 2576 MB/s [ 1.468070] raid6: using algorithm sse2x4 gen() (1832 MB/s) [ 1.468072] raid6: .... xor() 2576 MB/s, rmw enabled [ 1.468074] raid6: using ssse3x2 recovery algorithm [ 1.468131] ACPI: Added _OSI(Module Device) [ 1.468134] ACPI: Added _OSI(Processor Device) [ 1.468137] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.468140] ACPI: Added _OSI(Processor Aggregator Device) [ 1.470626] ACPI: EC: Look up EC in DSDT [ 1.485988] ACPI: SSDT 0x00000000B5599598 00521 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 1.486608] ACPI: Dynamic OEM Table Load: [ 1.486612] ACPI: SSDT 0x0000000000000000 00521 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 1.486774] ACPI: SSDT 0x00000000B5598918 003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 1.487378] ACPI: Dynamic OEM Table Load: [ 1.487381] ACPI: SSDT 0x0000000000000000 003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 1.495649] ACPI: SSDT 0x00000000B559EC18 0015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 1.496291] ACPI: Dynamic OEM Table Load: [ 1.496295] ACPI: SSDT 0x0000000000000000 0015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 1.499418] ACPI: SSDT 0x00000000B559AF18 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 1.500023] ACPI: Dynamic OEM Table Load: [ 1.500026] ACPI: SSDT 0x0000000000000000 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 1.503624] ACPI: Interpreter enabled [ 1.503645] ACPI: (supports S0 S4 S5) [ 1.503648] ACPI: Using IOAPIC for interrupt routing [ 1.503748] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.504742] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.505224] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.505549] ACPI: No dock devices found. [ 1.519297] ACPI: Power Resource [USBC] (on) [ 1.523671] ACPI: Power Resource [FN00] (off) [ 1.524681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.524911] \_SB_.PCI0:_OSC invalid UUID [ 1.524914] _OSC request data:1 8 0 [ 1.525377] PCI host bridge to bus 0000:00 [ 1.525383] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.525387] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 1.525390] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 1.525393] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.525396] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.525399] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 1.525402] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 1.525405] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0816ffe] [ 1.525418] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 1.525690] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 1.525712] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff] [ 1.525729] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] [ 1.525744] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087] [ 1.525965] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 1.525986] pci 0000:00:13.0: reg 10: [io 0xf070-0xf077] [ 1.525995] pci 0000:00:13.0: reg 14: [io 0xf060-0xf063] [ 1.526005] pci 0000:00:13.0: reg 18: [io 0xf050-0xf057] [ 1.526014] pci 0000:00:13.0: reg 1c: [io 0xf040-0xf043] [ 1.526024] pci 0000:00:13.0: reg 20: [io 0xf020-0xf03f] [ 1.526034] pci 0000:00:13.0: reg 24: [mem 0xd0816000-0xd08167ff] [ 1.526089] pci 0000:00:13.0: PME# supported from D3hot [ 1.526335] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 1.526360] pci 0000:00:14.0: reg 10: [mem 0xd0800000-0xd080ffff 64bit] [ 1.526416] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.526602] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.526708] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 1.526729] pci 0000:00:1a.0: reg 10: [mem 0xd0500000-0xd05fffff] [ 1.526740] pci 0000:00:1a.0: reg 14: [mem 0xd0400000-0xd04fffff] [ 1.526825] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 1.527051] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 1.527075] pci 0000:00:1b.0: reg 10: [mem 0xd0810000-0xd0813fff 64bit] [ 1.527143] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.527401] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 1.527480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.527647] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 1.527704] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.527940] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 1.528015] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.528194] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 1.528250] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.528460] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 1.528774] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 1.528809] pci 0000:00:1f.3: reg 10: [mem 0xd0814000-0xd081401f] [ 1.528879] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 1.529275] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.529401] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.529554] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 1.529579] pci 0000:03:00.0: reg 10: [io 0xe000-0xe0ff] [ 1.529616] pci 0000:03:00.0: reg 18: [mem 0xd0704000-0xd0704fff 64bit] [ 1.529639] pci 0000:03:00.0: reg 20: [mem 0xd0700000-0xd0703fff 64bit pref] [ 1.529721] pci 0000:03:00.0: supports D1 D2 [ 1.529724] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.529771] pci 0000:03:00.0: System wakeup disabled by ACPI [ 1.531400] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.531409] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 1.531417] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff] [ 1.531572] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601 [ 1.531595] pci 0000:04:00.0: reg 10: [io 0xd050-0xd057] [ 1.531615] pci 0000:04:00.0: reg 14: [io 0xd040-0xd043] [ 1.531627] pci 0000:04:00.0: reg 18: [io 0xd030-0xd037] [ 1.531638] pci 0000:04:00.0: reg 1c: [io 0xd020-0xd023] [ 1.531650] pci 0000:04:00.0: reg 20: [io 0xd000-0xd01f] [ 1.531662] pci 0000:04:00.0: reg 24: [mem 0xd0600000-0xd06001ff] [ 1.531748] pci 0000:04:00.0: System wakeup disabled by ACPI [ 1.533414] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.533424] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 1.533432] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 1.533459] pci_bus 0000:00: on NUMA node 0 [ 1.533629] \_SB_.PCI0:_OSC invalid UUID [ 1.533632] _OSC request data:1 1f 0 [ 1.533638] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 1.533641] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 1.534543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.534647] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15) [ 1.534750] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.534852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.534954] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.535055] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.535158] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.535260] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.537164] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.537176] acpi root: \_SB_.PCI0 notify handler is installed [ 1.537363] Found 1 acpi root devices [ 1.537748] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.537754] vgaarb: loaded [ 1.537755] vgaarb: bridge control possible 0000:00:02.0 [ 1.538009] SCSI subsystem initialized [ 1.538013] ACPI: bus type ATA registered [ 1.538209] libata version 3.00 loaded. [ 1.538476] pps_core: LinuxPPS API ver. 1 registered [ 1.538481] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.538548] PTP clock support registered [ 1.538776] PCI: Using ACPI for IRQ routing [ 1.544389] PCI: pci_cache_line_size set to 64 bytes [ 1.544432] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 1.544436] e820: reserve RAM buffer [mem 0xb5571000-0xb7ffffff] [ 1.544439] e820: reserve RAM buffer [mem 0xb55f5000-0xb7ffffff] [ 1.544441] e820: reserve RAM buffer [mem 0xb5a7b000-0xb7ffffff] [ 1.544444] e820: reserve RAM buffer [mem 0xb5c2b000-0xb7ffffff] [ 1.544446] e820: reserve RAM buffer [mem 0xb6000000-0xb7ffffff] [ 1.544884] Switching to clocksource hpet [ 1.545083] AppArmor: AppArmor Filesystem Enabled [ 1.545168] pnp: PnP ACPI init [ 1.545179] ACPI: bus type PNP registered [ 1.545280] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.545454] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.545662] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.545841] system 00:03: [io 0x0680-0x069f] has been reserved [ 1.545850] system 00:03: [io 0x0400-0x047f] could not be reserved [ 1.545856] system 00:03: [io 0x0500-0x05fe] has been reserved [ 1.545864] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.546132] system 00:04: [io 0x0290-0x029f] has been reserved [ 1.546137] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.546868] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.546873] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.546877] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.546880] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved [ 1.546884] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 1.546887] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.546891] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.546894] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.546904] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved [ 1.546929] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.548788] pnp 00:06: Plug and Play ACPI device, IDs INT33bd (active) [ 1.548805] pnp: PnP ACPI: found 7 devices [ 1.548807] ACPI: bus type PNP unregistered [ 1.562889] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 1.562896] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 1.562900] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 1.562909] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 1.562913] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 1.562917] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 1.562935] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 1.562944] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 1.562955] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.562958] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.562962] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.562965] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.562968] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.562972] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.562975] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.562978] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.562986] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000) [ 1.562991] pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000) [ 1.562997] pci 0000:00:1c.1: BAR 14: can't assign mem (size 0x200000) [ 1.563002] pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000) [ 1.563006] pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x200000) [ 1.563011] pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000) [ 1.563016] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.563020] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 1.563026] pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000) [ 1.563031] pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x200000) [ 1.563035] pci 0000:00:1c.1: BAR 14: can't assign mem (size 0x200000) [ 1.563040] pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000) [ 1.563044] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000) [ 1.563048] pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000) [ 1.563052] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.563056] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.563066] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.563070] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 1.563079] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.563082] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 1.563088] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff] [ 1.563095] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.563098] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 1.563103] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 1.563471] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 1.563476] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 1.563479] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 1.563482] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 1.563485] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 1.563488] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 1.563491] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0816ffe] [ 1.563494] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.563498] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 1.563501] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.563504] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.563507] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 1.563510] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.563585] NET: Registered protocol family 2 [ 1.563880] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 1.564038] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.564168] TCP: Hash tables configured (established 32768 bind 32768) [ 1.564218] TCP: reno registered [ 1.564224] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.564250] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.564367] NET: Registered protocol family 1 [ 1.564550] RPC: Registered named UNIX socket transport module. [ 1.564553] RPC: Registered udp transport module. [ 1.564555] RPC: Registered tcp transport module. [ 1.564557] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.564570] pci 0000:00:02.0: Boot video device [ 1.564833] PCI: CLS 64 bytes, default 64 [ 1.564896] Trying to unpack rootfs image as initramfs... [ 3.745747] Freeing initrd memory: 7960k freed [ 3.762812] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.762820] software IO TLB [mem 0xb1571000-0xb5571000] (64MB) mapped at [ffff8800b1571000-ffff8800b5570fff] [ 3.778430] audit: initializing netlink socket (disabled) [ 3.778454] type=2000 audit(1532178576.517:1): initialized [ 3.784929] bounce pool size: 64 pages [ 3.786659] VFS: Disk quotas dquot_6.5.2 [ 3.786699] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.787513] NFS: Registering the id_resolver key type [ 3.787531] Key type id_resolver registered [ 3.787533] Key type id_legacy registered [ 3.787556] msgmni has been set to 7576 [ 3.788282] async_tx: api initialized (async) [ 3.788437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.788441] io scheduler noop registered [ 3.788444] io scheduler deadline registered [ 3.788459] io scheduler cfq registered (default) [ 4.509304] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.511286] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 [ 4.591492] brd: module loaded [ 4.600162] Loading iSCSI transport class v2.0-870. [ 4.628599] rdac: device handler registered [ 4.632909] ahci 0000:00:13.0: version 3.0 [ 4.633129] ahci 0000:00:13.0: irq 103 for MSI/MSI-X [ 4.643984] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 4.643996] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds [ 4.644005] ahci 0000:00:13.0: setting latency timer to 64 [ 4.646998] scsi0 : ahci [ 4.650477] scsi1 : ahci [ 4.652729] ata1: SATA max UDMA/133 abar m2048@0xd0816000 port 0xd0816100 irq 103 [ 4.652736] ata2: SATA max UDMA/133 abar m2048@0xd0816000 port 0xd0816180 irq 103 [ 4.652903] ahci 0000:04:00.0: irq 104 for MSI/MSI-X [ 4.652986] ahci: SSS flag set, parallel bus scan disabled [ 4.653021] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.653026] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 4.662734] scsi2 : ahci [ 4.667026] scsi3 : ahci [ 4.668382] ata3: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600100 irq 104 [ 4.668389] ata4: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600180 irq 104 [ 4.681500] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.686768] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.686782] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.686993] rtc_cmos 00:00: RTC can wake from S4 [ 4.688890] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 4.688934] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.691506] i2c /dev entries driver [ 4.694697] md: linear personality registered for level -1 [ 4.694703] md: raid0 personality registered for level 0 [ 4.694705] md: raid1 personality registered for level 1 [ 4.694707] md: raid10 personality registered for level 10 [ 4.696422] md: raid6 personality registered for level 6 [ 4.696427] md: raid5 personality registered for level 5 [ 4.696429] md: raid4 personality registered for level 4 [ 4.696431] md: raidF1 personality registered for level 45 [ 4.697796] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 4.697804] cpuidle: using governor ladder [ 4.697807] cpuidle: using governor menu [ 4.697952] TCP: cubic registered [ 4.697956] NET: Registered protocol family 17 [ 4.698070] Key type dns_resolver registered [ 4.764034] tsc: Refined TSC clocksource calibration: 2416.666 MHz [ 4.764046] Switching to clocksource tsc [ 4.958155] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.958732] ata1.00: ATA-9: WDC WD10EZRX-00A3KB0, 01.01A01, max UDMA/133 [ 4.958739] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.959344] ata1.00: configured for UDMA/133 [ 4.959950] scsi 0:0:0:0: Direct-Access WDC WD10EZRX-00A3KB0 01.0 PQ: 0 ANSI: 5 [ 4.960621] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.960625] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.960708] sd 0:0:0:0: [sda] Write Protect is off [ 4.960713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.960750] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.962176] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.962770] ata2.00: ATA-9: WDC WD10EZRX-00A3KB0, 01.01A01, max UDMA/133 [ 4.962775] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.963393] ata2.00: configured for UDMA/133 [ 4.963974] scsi 1:0:0:0: Direct-Access WDC WD10EZRX-00A3KB0 01.0 PQ: 0 ANSI: 5 [ 4.967784] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.967789] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 4.967873] sd 1:0:0:0: [sdb] Write Protect is off [ 4.967877] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.967915] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.979691] sda: sda1 sda2 sda3 [ 4.980769] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.987488] sdb: sdb1 sdb2 sdb3 [ 4.992312] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.128277] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.128831] ata3.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133 [ 5.128840] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.129377] ata3.00: configured for UDMA/133 [ 5.129966] scsi 2:0:0:0: Direct-Access WDC WD10EZRX-00L4HB0 01.0 PQ: 0 ANSI: 5 [ 5.130682] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.130687] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 5.130772] sd 2:0:0:0: [sdc] Write Protect is off [ 5.130776] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.130813] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.147443] sdc: sdc1 sdc2 sdc3 [ 5.148628] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.592574] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.593109] ata4.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133 [ 5.593116] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.593679] ata4.00: configured for UDMA/133 [ 5.594278] scsi 3:0:0:0: Direct-Access WDC WD10EZRX-00L4HB0 01.0 PQ: 0 ANSI: 5 [ 5.594993] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.595002] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 5.595134] sd 3:0:0:0: [sdd] Write Protect is off [ 5.595139] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.595177] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.614231] sdd: sdd1 sdd2 sdd3 [ 5.615365] sd 3:0:0:0: [sdd] Attached SCSI disk [ 5.615415] registered taskstats version 1 [ 5.615855] rtc_cmos 00:00: setting system clock to 2018-07-21 13:09:34 UTC (1532178574) [ 5.616821] Freeing unused kernel memory: 760k freed [ 5.617092] Write protecting the kernel read-only data: 8192k [ 5.617298] Freeing unused kernel memory: 1320k freed [ 5.619530] Freeing unused kernel memory: 500k freed [ 5.715807] ACPI: bus type USB registered [ 5.716158] usbcore: registered new interface driver usbfs [ 5.716263] usbcore: registered new interface driver hub [ 5.717293] usbcore: registered new interface driver ethub [ 5.719462] usbcore: registered new device driver usb [ 5.740727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.751120] ehci-pci: EHCI PCI platform driver [ 5.764411] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.775558] uhci_hcd: USB Universal Host Controller Interface driver [ 5.787008] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 5.787014] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 5.787023] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 5.787153] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 5.787179] xhci_hcd 0000:00:14.0: irq 105 for MSI/MSI-X [ 5.787498] xHCI xhci_add_endpoint called for root hub [ 5.787501] xHCI xhci_check_bandwidth called for root hub [ 5.787687] hub 1-0:1.0: USB hub found [ 5.787698] hub 1-0:1.0: 6 ports detected [ 5.788238] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 5.788248] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 5.788521] xHCI xhci_add_endpoint called for root hub [ 5.788527] xHCI xhci_check_bandwidth called for root hub [ 5.788799] hub 2-0:1.0: USB hub found [ 5.788811] hub 2-0:1.0: 1 port detected [ 5.838064] usbcore: registered new interface driver usb-storage [ 5.869626] VMware PVSCSI driver - version 1.0.2.0-k [ 5.880612] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.891637] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.925596] Fusion MPT base driver 3.04.20 [ 5.925603] Copyright (c) 1999-2008 LSI Corporation [ 5.946980] Fusion MPT SPI Host driver 3.04.20 [ 5.958053] Fusion MPT SAS Host driver 3.04.20 [ 5.969251] Fusion MPT misc device (ioctl) driver 3.04.20 [ 5.969523] mptctl: Registered with Fusion MPT base driver [ 5.969530] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.991988] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013 [ 6.003848] mpt2sas version 20.00.00.00 loaded [ 6.015895] mpt3sas version 01.100.01.00 loaded [ 6.035394] bromolow_synobios: module license 'Synology Inc.' taints kernel. [ 6.035400] Disabling lock debugging due to kernel taint [ 6.036016] 2018-7-21 13:9:34 UTC [ 6.036022] synobios: load, major number 201 [ 6.036027] Brand: Synology [ 6.036030] Model: DS-3615xs [ 6.036034] set group disks wakeup number to 4, spinup time deno 7 [ 6.537201] synobios cpu_arch proc entry initialized [ 6.537210] synobios crypto_hw proc entry initialized [ 6.537216] synobios syno_platform proc entry initialized [ 6.548939] synobios: unload [ 6.563313] md: Autodetecting RAID arrays. [ 6.604745] md: invalid raid superblock magic on sda3 [ 6.605007] md: sda3 does not have a valid v0.90 superblock, not importing! [ 6.656424] md: invalid raid superblock magic on sdb3 [ 6.656683] md: sdb3 does not have a valid v0.90 superblock, not importing! [ 6.703090] md: invalid raid superblock magic on sdc3 [ 6.703354] md: sdc3 does not have a valid v0.90 superblock, not importing! [ 6.747312] md: invalid raid superblock magic on sdd3 [ 6.747571] md: sdd3 does not have a valid v0.90 superblock, not importing! [ 6.747578] md: Scanned 12 and added 8 devices. [ 6.747580] md: autorun ... [ 6.747582] md: considering sda1 ... [ 6.747590] md: adding sda1 ... [ 6.747594] md: sda2 has different UUID to sda1 [ 6.747598] md: adding sdb1 ... [ 6.747602] md: sdb2 has different UUID to sda1 [ 6.747606] md: adding sdc1 ... [ 6.747610] md: sdc2 has different UUID to sda1 [ 6.747614] md: adding sdd1 ... [ 6.747617] md: sdd2 has different UUID to sda1 [ 6.747631] md: created md0 [ 6.747634] md: bind<sdd1> [ 6.747653] md: bind<sdc1> [ 6.747666] md: bind<sdb1> [ 6.747676] md: bind<sda1> [ 6.747687] md: running: <sda1><sdb1><sdc1><sdd1> [ 6.748064] md/raid1:md0: active with 4 out of 12 mirrors [ 6.748109] md0: detected capacity change from 0 to 2549940224 [ 6.748350] md: considering sda2 ... [ 6.748359] md: adding sda2 ... [ 6.748365] md: adding sdb2 ... [ 6.748370] md: adding sdc2 ... [ 6.748375] md: adding sdd2 ... [ 6.748886] md: created md1 [ 6.748890] md: bind<sdd2> [ 6.748903] md: bind<sdc2> [ 6.748916] md: bind<sdb2> [ 6.748928] md: bind<sda2> [ 6.748938] md: running: <sda2><sdb2><sdc2><sdd2> [ 6.749219] md/raid1:md1: active with 4 out of 12 mirrors [ 6.749251] md1: detected capacity change from 0 to 2147418112 [ 6.749398] md: ... autorun DONE. [ 7.024943] md0: unknown partition table [ 7.966528] EXT4-fs (md0): barriers disabled [ 7.976974] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 8.186257] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 8.198486] Got empty serial number. Generate serial number from product. [ 8.199408] hub 1-2:1.0: USB hub found [ 8.199647] hub 1-2:1.0: 3 ports detected [ 9.324996] usb 1-3: new high-speed USB device number 4 using xhci_hcd [ 19.349498] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command. [ 19.349508] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host. [ 19.349532] xhci_hcd 0000:00:14.0: HC died; cleaning up [ 19.349815] Got empty serial number. Generate serial number from product. [ 19.350187] usb 1-2: USB disconnect, device number 3 [ 19.350704] usb 1-3: USB disconnect, device number 4 [ 21.506083] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 22.871325] EXT4-fs (md0): re-mounted. Opts: (null) [ 26.287583] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.287734] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 26.287870] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 26.288020] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 26.614201] md1: unknown partition table [ 26.771804] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 27.076837] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 27.078267] zram: Created 4 device(s) ... [ 27.093403] Adding 582652k swap on /dev/zram0. Priority:1 extents:1 across:582652k SS [ 27.106791] Adding 582652k swap on /dev/zram1. Priority:1 extents:1 across:582652k SS [ 27.120310] Adding 582652k swap on /dev/zram2. Priority:1 extents:1 across:582652k SS [ 27.133824] Adding 582652k swap on /dev/zram3. Priority:1 extents:1 across:582652k SS [ 29.158650] NET: Registered protocol family 10 [ 29.185565] sit: IPv6 over IPv4 tunneling driver [ 29.501287] init: syno-auth-check main process (5144) killed by TERM signal [ 29.665310] ACPI: Requesting acpi_cpufreq [ 29.667610] Monitor-Mwait will be used to enter C-1 state [ 29.667624] Monitor-Mwait will be used to enter C-2 state [ 29.667645] ACPI: acpi_idle registered with cpuidle [ 30.167226] fuse init (API version 7.22) [ 30.180325] dca service started, version 1.12.1 [ 30.187219] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 30.187224] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 30.200323] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3 [ 30.200328] Copyright (c) 2007-2015 Intel Corporation. [ 30.214626] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6 [ 30.214631] Copyright(c) 1999 - 2016 Intel Corporation. [ 30.214711] ixgbe unsupported_sfp_notify proc entry initialized [ 30.225168] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19 [ 30.225174] i40e: Copyright(c) 2013 - 2016 Intel Corporation. [ 30.264491] tn40xx low_mem_msg proc entry initialized [ 30.264497] tn40xx low_mem_counter proc entry initialized [ 30.264501] tn40xx debug_msg proc entry initialized [ 30.264503] tn40xx: Tehuti Network Driver, 0.3.6.12.3 [ 30.272128] r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded [ 30.272366] r8168 0000:03:00.0: irq 106 for MSI/MSI-X [ 30.286708] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 30.286718] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 30.352761] qed_init called [ 30.352768] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0 [ 30.352772] creating debugfs root node [ 30.360546] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0 [ 30.367151] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 30.367156] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 30.401467] Compat-mlnx-ofed backport release: cd30181 [ 30.401472] Backport based on mlnx_ofed/mlnx_rdma.git cd30181 [ 30.401474] compat.git: mlnx_ofed/mlnx_rdma.git [ 30.702318] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $) [ 30.793305] bio: create slab <bio-1> at 1 [ 30.793531] Btrfs loaded [ 30.811455] exFAT: Version 1.2.9 [ 30.872214] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 30.884668] sky2: driver version 1.30 [ 30.897359] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01 [ 30.910510] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42 [ 30.923598] QLogic/NetXen Network Driver v4.0.80 [ 30.930364] Solarflare NET driver v3.2 [ 30.937047] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 30.937054] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 30.943624] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 30.950011] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 30.969099] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 31.012328] usbcore: registered new interface driver ax88179_178a [ 31.018637] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 31.018651] ACPI: Power Button [PWRB] [ 31.018799] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 31.018808] ACPI: Sleep Button [SLPB] [ 31.018954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 31.018959] ACPI: Power Button [PWRF] [ 31.084943] 2018-7-21 13:9:34 UTC [ 31.084950] synobios: load, major number 201 [ 31.084955] Brand: Synology [ 31.084958] Model: DS-3615xs [ 31.084961] set group disks wakeup number to 4, spinup time deno 7 [ 31.196764] systemd-udevd[5914]: starting version 204 [ 31.585495] synobios cpu_arch proc entry initialized [ 31.585502] synobios crypto_hw proc entry initialized [ 31.585505] synobios syno_platform proc entry initialized [ 32.705133] eth0: 0xffffc900112ac000, 00:11:32:0c:2f:c5, IRQ 106 [ 32.771725] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.305163] md: md2 stopped. [ 34.307592] md: bind<sdb3> [ 34.308504] md: bind<sdc3> [ 34.308712] md: bind<sdd3> [ 34.308910] md: bind<sda3> [ 34.315803] md/raid:md2: device sda3 operational as raid disk 0 [ 34.315810] md/raid:md2: device sdd3 operational as raid disk 3 [ 34.315813] md/raid:md2: device sdc3 operational as raid disk 2 [ 34.315815] md/raid:md2: device sdb3 operational as raid disk 1 [ 34.316662] md/raid:md2: allocated 4348kB [ 34.319452] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 34.319458] RAID conf printout: [ 34.319461] --- level:5 rd:4 wd:4 [ 34.319464] disk 0, o:1, dev:sda3 [ 34.319466] disk 1, o:1, dev:sdb3 [ 34.319469] disk 2, o:1, dev:sdc3 [ 34.319471] disk 3, o:1, dev:sdd3 [ 34.319513] md2: detected capacity change from 0 to 2985800957952 [ 34.320038] md2: unknown partition table [ 34.548139] bio: create slab <bio-2> at 2 [ 35.380767] EXT4-fs (dm-1): barriers disabled [ 35.465292] EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 35.794630] r8168: eth0: link up [ 35.794662] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.666615] usbcore: registered new interface driver usblp [ 36.863325] usbcore: registered new interface driver usbhid [ 36.863330] usbhid: USB HID core driver [ 36.997177] init: dhcp-client (eth0) main process (7365) killed by TERM signal [ 38.212792] init: dhcp-client (eth0) main process (8638) killed by TERM signal [ 39.779163] ata1.00: configured for UDMA/133 [ 39.779175] ata1: EH complete [ 39.875016] ata2.00: configured for UDMA/133 [ 39.875027] ata2: EH complete [ 39.941110] ata3.00: configured for UDMA/133 [ 39.941120] ata3: EH complete [ 40.003199] ata4.00: configured for UDMA/133 [ 40.003209] ata4: EH complete [ 40.081290] r8168: eth0: link up [ 41.292380] init: dhcp-client (eth0) main process (8937) killed by TERM signal [ 44.062048] IPv6: eth0: IPv6 duplicate address fde8:5440:de19::1 detected! [ 46.351682] loop: module loaded [ 46.592887] init: dhcp-client6 (eth0/client) main process (9310) killed by TERM signal [ 48.256598] iSCSI:target_core_rodsp_server.c:1021:rodsp_server_init RODSP server started, login_key(0011320c2fc5). [ 48.283915] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized [ 48.303827] iSCSI:target_core_device.c:571:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 48.304050] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 48.385023] iSCSI:target_core_file.c:92:fd_attach_hba RODSP plugin for fileio is enabled. [ 48.385043] iSCSI:target_core_ep.c:862:ep_attach_hba RODSP plugin for epio is enabled. [ 48.385049] iSCSI:target_core_ep.c:869:ep_attach_hba ODX Token Manager is enabled. [ 52.449885] usbcore: registered new interface driver usbserial [ 52.472422] usbcore: registered new interface driver ftdi_sio [ 52.472444] usbserial: USB Serial support registered for FTDI USB Serial Device [ 52.596990] usbcore: registered new interface driver cp210x [ 52.597011] usbserial: USB Serial support registered for cp210x [ 52.623046] usbcore: registered new interface driver pl2303 [ 52.623067] usbserial: USB Serial support registered for pl2303 [ 52.656182] usbcore: registered new interface driver ch341 [ 52.656205] usbserial: USB Serial support registered for ch341-uart [ 52.685007] usbcore: registered new interface driver ti_usb_3410_5052 [ 52.685028] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 52.685042] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 53.649670] ata1.00: configured for UDMA/133 [ 53.649679] ata1: EH complete [ 53.661123] ata2.00: configured for UDMA/133 [ 53.661131] ata2: EH complete [ 53.687959] init: pkg-WebStation-userdir main process (13313) terminated with status 1 [ 53.726499] ata3.00: configured for UDMA/133 [ 53.726511] ata3: EH complete [ 53.734921] ip_tables: (C) 2000-2006 Netfilter Core Team [ 53.736981] ata4.00: configured for UDMA/133 [ 53.736993] ata4: EH complete [ 53.814509] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 54.820072] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 55.188026] init: pkg-WebStation-php56 main process (13551) killed by USR2 signal [ 55.188119] init: pkg-WebStation-php56 main process ended, respawning [ 55.206733] init: pkg-WebStation-php70 main process (13552) killed by USR2 signal [ 55.206805] init: pkg-WebStation-php70 main process ended, respawning [ 55.498228] aufs 3.10.x-20141110 [ 55.591333] Bridge firewalling registered [ 62.264656] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 62.392868] usbcore: registered new interface driver snd-usb-audio [ 62.579781] usbcore: registered new interface driver snd-usb-hiface [ 63.548829] aufs au_opts_verify:1571:dockerd[15043]: dirperm1 breaks the protection by the permission bits on the lower branch [ 63.786737] aufs au_opts_verify:1571:dockerd[15043]: dirperm1 breaks the protection by the permission bits on the lower branch [ 65.666713] cgroup: docker-runc (16183) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 444.267445] perf interrupt took too long (3031 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
Precise point, here in quote.
What can I do?
Quote[ 8.186257] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 8.198486] Got empty serial number. Generate serial number from product.
[ 8.199408] hub 1-2:1.0: USB hub found
[ 8.199647] hub 1-2:1.0: 3 ports detected
[ 9.324996] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 19.349498] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 19.349508] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 19.349532] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 19.349815] Got empty serial number. Generate serial number from product.
[ 19.350187] usb 1-2: USB disconnect, device number 3
[ 19.350704] usb 1-3: USB disconnect, device number 4
Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs
in Additional Compiled Modules
Posted · Edited by gatsu_1981
Hi, as I said, with 6.2.2 even if I had /dev/dri populated, my NAS would spontaneously reboot when video seeking in videostation / jellyfin, with HW encoding enabled.
Now, with 6.2.3 with patched drivers, it doesn't happen anymore 🙂 so without patched driver I did not have /dev/dri, but after using extra/extra2 from first post I now have fully working HW encoding since /dev/dri appeared again and it doesn't reboot anymore on video seeking 😃