Bar1
-
Posts
29 -
Joined
-
Last visited
Posts posted by Bar1
-
-
Hi,
So i have been using DSM7 on proxmox for a little bit, created some shares and played around, i am passing through an 18TB drive,
now it became read only and I can't seem to make it read/write again.
Do I need to pass it with any specific cache settings?
The drive is fine i think, passing the SMART tests.
-
Hi everyone, i just restored my DSM vm from backup and for some reason i can't login.
i am 99% sure i am using the correct password....is there a way to reset the password ?
-
Hi, i changed from a proxmox set up to a pop OS desktop with DSM7 installed as a qemu VM.
when i try to add the hard drives they are not being detected and saying "not initialized"
any idea what i did wrong?
-
hi everyone....am i missing something?
where is the link for the img file?
ok found it.
-
i do prefer ESXI or KVM.....will wait a bit for a loader but might try VMM (it'll probably not be great though because it'll be a vm within a vm)
-
Sorry i am sure it was mentioned somewhere....but any updates on DSM 7 as a VM?
-
I am currently running DSM as a VM on proxmox.
but can't decide if i should pass through my new 8TB hard drive, or rather use a virtual hard drive and use some of the space on other vms.
any thoughts?
-
ok please confirm:
posted version above: Last tested and worked for me is 6.2 update 2 with bootloader 1.03 (DS3617).
is this 1.03a or b?
i am sure i am using the right one.....103b 3617
-
I installed the PAT file, it did a reboot.
it did not ask me to chose a password yet.
-
no ipaddress....
admin@DiskStation:/$ dmesg | grep 'e1000' [ 15.872062] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 15.872066] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 18.404408] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 18.404412] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 18.434466] e1000 0000:00:12.0: setting latency timer to 64 [ 18.435017] Modules linked in: e1000(F+) sfc(F) netxen_nic(F) qlge(F) qlcnic(F) qla3xxx(F) pch_gbe(F) ptp_pch(F) sky2(F) skge(F) ipg(F) uio(F) alx(F) atl1c(F) atl1e(F) atl1(F) libphy(F) mii(F) exfat(O) btrfs synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac bnx2x(O) libcrc32c mdio mlx5_core(O) mlx4_en(O) mlx4_core(O) mlx_compat(O) compat(O) qede(O) qed(O) atlantic(O) tn40xx(O) i40e(O) ixgbe(O) be2net(O) igb(O) i2c_algo_bit e1000e(O) dca vxlan fuse vfat fat glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 [ 18.435017] [<ffffffffa0ad09a3>] ? e1000_probe+0x373/0xf60 [e1000] [ 18.435017] [<ffffffffa03be04c>] ? e1000_init_module+0x4c/0x82 [e1000]
-
ok i see it's admin and blank let me try
-
i didnt get to the part where you set your username and password....by the way, thank you so much for your help!
and my dhcp isn't showing DSM is connected.
-
i did notice that....but my network is definitely set to e1000....
-
after the install the vm isn't getting an ip address...i dont really see any errors...
[ 49.325024] RIP [<ffffffff81007aa2>] dma_set_mask+0x22/0x50 [ 49.325024] RSP <ffff88010a997c00> [ 49.325024] CR2: 00000000ffffffff [ 49.506556] ---[ end trace e169fc0603087d05 ]--- [ 49.518569] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 49.526119] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 49.545742] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 49.564534] r8168: Unknown symbol pci_disable_link_state (err 0) [ 49.572138] r8169: Unknown symbol pci_disable_link_state (err 0) [ 49.590418] usbcore: registered new interface driver ax88179_178a [ 49.596941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 49.598847] ACPI: Power Button [PWRF] [ 49.654393] 2018-12-14 21:59:35 UTC [ 49.655258] synobios: load, major number 201 [ 49.656277] Brand: Synology [ 49.657006] Model: DS-3617xs [ 49.657693] set group disks wakeup number to 4, spinup time deno 7 [ 49.659116] synobios cpu_arch proc entry initialized [ 49.660262] synobios crypto_hw proc entry initialized [ 49.661418] synobios syno_platform proc entry initialized [ 49.662686] synobios open /dev/ttyS1 success [ 53.425281] usbcore: registered new interface driver usblp [ 53.542982] usbcore: registered new interface driver usbhid [ 53.544890] usbhid: USB HID core driver [ 53.571331] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input1 [ 53.574513] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 Fri Dec 14 13:59:40 2018 DiskStation login: [ 55.782980] ata2.00: configured for UDMA/100 [ 55.784390] ata2: EH complete DiskStation login:
-
any change you can send me a link to DS3617 6,2 update 2?
-
I am using the latest loader ,1.04 ,with :
https://www.kickinass.net/xpenology-6-2-unter-proxmox-installieren/
now i can't even see the network.
qm terminal 102 doesn't show anything!
just to confirm....do i set the serial number on the newly created hard disk or the image?
blessendor, thanks but your config does not work for me.
-
I am not winning here
can someone please recommend a good guide?
-
-
agent: 1
args: -device 'piix3-usb-uhci,addr=0x18' -drive 'id=synoboot,file=/var/lib/vz/images/102/synoboot.img,if=none,format=raw' -device 'usb-storage,id=synoboot,drive=synoboot'
bios: seabios
boot: cdn
bootdisk: sata0
cores: 1
efidisk0: local-zfs:vm-102-disk-1,size=128K
ide2: none,media=cdrom
memory: 2000
name: BDSM
net0: e1000=00:11:32:2C:A6:03,bridge=vmbr0
numa: 0
ostype: l26
sata0: local-zfs:vm-102-disk-0,size=20G,serial=A8ODN02468
sata1: local-zfs:vm-102-disk-2,size=50M
serial0: socket
smbios1: uuid=5493a726-0a20-4c4a-a6c6-53ab7062e8ab
sockets: 1
tablet: 0
vmgenid: 56e9aba4-ba92-4c3a-80af-73c3a186f5e5 -
Hi everyone, i am really struggling here.
I checked grub.cfg and its got the following:
set sn=A8ODN02468
set mac1=0011322CA603so i changed my mac and serial number to match but i still can't boot.
EDIT: ok changing bios to seabios, i managed to install but now its just saying: booting from hard drive....
-
not working....what synoboot should i be using?
-
4 minutes ago, kazuni said:
Also, when you boot up, hang the pc to bios and check if the boot order is correct
where do i find the mac address?
-
agent: 1
args: -device 'piix3-usb-uhci,addr=0x18' -drive 'id=synoboot,file=/var/lib/vz/images/102/synoboot.img,if=none,format=raw' -device 'usb-storage,id=synoboot,drive=synoboot'
bios: ovmf
bootdisk: sata0
cores: 1
efidisk0: local-zfs:vm-102-disk-1,size=128K
ide2: none,media=cdrom
memory: 2000
name: 1-DSM
net0: e1000=0E:69:70:F5:F6:5A,bridge=vmbr0
numa: 0
ostype: l26
sata0: local-zfs:vm-102-disk-0,size=20G
scsihw: virtio-scsi-pci
smbios1: uuid=5493a726-0a20-4c4a-a6c6-53ab7062e8ab
sockets: 1
vmgenid: 56e9aba4-ba92-4c3a-80af-73c3a186f5e5 -
Hi everyone...not sure if it was mentioned before.
Running proxmox, trying to install 6.2, the grub screen comes on for 1 second and then the VM is switching off......what am i missing ?
Disk is stuck as read only.
in The Noob Lounge
Posted
I can't seem to remove the read only via the DSM web gui. Ialso tried via ssh to remount with -RW without successful. so I thought maybe i am passing through the hard drive incorrectly.