-
Posts
15 -
Joined
-
Last visited
Posts posted by ZerOneX
-
-
Well, I just replaced the extra.lzma and extra2.lzma on my terramaster -f4-220 and it is not working.
Any suggestion IG-88? Thank you
PS. Without the hard drives it boot properly but when I added them and manually install the DSM_DS918+_24922, Synology Assistant does not find them
-
On 12/28/2019 at 7:00 AM, IG-88 said:
you need a new driver set for 6.2.2 (you onboard broadcom nic driver is not working atm)
treat it like coming from dsm 6.1 (case 2), create 1.03b 3617 usb, copy the kernel and rd from the dsm 6.2.2 pat file and the new extra.lzma to it and on next reboot it should finish the installation for 6.2.2 by itself
Thank you for your reply.
The same is valid for the 918+?
I am with the same problem.
Already downloaded the new driver extension for 1.04b, but it not clear for me the part of copying kernel and rd for 918+
Thank you very much IG-88
-
On 12/4/2018 at 10:38 AM, ixlkicker said:
In the grub file it ask for the SN, I went to the serial generator and don't see an option for ds918+, can anyone point me in the right direction please?
enjoy
If you need a valid serial and mac addresses for DS918+, you will find it in one of the pictures in this article from Slashgear.com.
https://www.slashgear.com/synology-ds918-nas-review-17508401/
-
Bonjour,
Quels sont les numéros de série que nous devrions utiliser pour ds918 +?
Je vous remercie.
-
Hi guys, I am wondering if it is possible to buy official packages from synology store.
I am interested in the exFAT package that costs 3.99 USD.
I tried it yesterday but it did not work.
Best regards,
ZerO.
-
Hi @jensmander, did you test writing data to your HDD or just reading?? Thank you
-
Guys, quick question for the ones that has the cable....
It is possible, through a BIOS setup, to change the USB port to boot the pendrive with the bootloader?
-
Yes, we need a VGA cable!
Gonna wait for a fix then...
For now will continue on 6.1.7
-
28 minutes ago, Dfds said:
As very few people are likely to have that hardware I would suggest that you test it yourself with a spare HDD.
That is the problem... I do not have a spare hdd... gonna have to find one...
Will do my best
-
thank you jun... gonna test it today
-
On 8/2/2018 at 2:51 AM, hoppler said:
Compiled button.ko and evdev.ko with newest bromolow sources so itll work with dsm 6.2 (i guess it will only work for ds3615 and ds3617)
HowTo:
1. download linux-VERSION_NUMBER.txz from newest branch https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/ according to your architecture https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model
2. extract archive and execute the following
#if you have another architecture, change bromolow cp synoconfigs/bromolow .config make ARCH="x86_64" oldconfig make ARCH="x86_64" menuconfig # set as module: Device Drivers ---> Input device support --> Event interface make ARCH="x86_64" modules
3. search for button.ko and evdev.ko and put it into the package.tgz under modules/6.2/ in your powerbutton.spk and save.
I attached a ready to go spk for bromolow (ds3615) but it works for ds3617 too
or
Thank you very much hoppler
-
Guys, anyone here tried to update to DSM 6.2 using JUN's LOADER 1.03? Tks
-
Here everything worked flawless.... just used the correct VID/PID.....
Terramaster F4-220 fan control
in Software Modding
Posted
@eudeanyou rock... thank you very much...
I put it on my task scheduler and it is working like a charm!!!!