Jump to content
XPEnology Community

vortexxx

Member
 View Profile  See their activity

  • Posts

    57

  • Joined

  • Last visited

 Content Type 

Posts posted by vortexxx

    HP 764A HBA works

    in DSM 7.x

    The New Active Backup

    in Synology Packages

    Posted

    В 28.12.2022 в 17:54, alx0101 сказал:

    Firstly, prep the two URL lines fully, for copy and paste into the address bar.

     

    (i used CHrome on a brand new installation of DSM 7.1.1-42962 Update 1 )

     

    important: START AN INCOGNITO tab to ensure independence from any existing logged in sessions !!!!

     

    PAste the FIRST LINE in:

     

    If using port 5000 and it is http (not https)....whatever your NAS is set to..eg port 5001 for https

     

    replace IP_ADDRESS, USERNAME and PASS below with your admin details:-

     

    FIRST URL

    http://IP_ADDRESS:5000/webapi/auth.cgi?api=SYNO.API.Auth&version=3&method=login&account=USERNAME&passwd=PASS&format=%20cookie

     

    FIRST URL LINE result looks like:-  (replace some of string with some etc_etc_etc)

      

    {"data":{"did":"gL9TOKetc etc etc.........pLh9mJt6w","sid":"bihju7DywBW8etc_etc_etcxHZXQ"},"success":true}

     

    If you do not get something like above, recheck your FIRST LINE URL...no point proceeding to the next step until you see something similar to above, with long strings for "did" and "sid".

     

    then paste in the same address bar the second link:

     

    replace SERIALNUMBER with the SERIAL NUMBER from your DSM control panel INFO page:

     

    SECOND URL 

    http://IP_ADDRESS:5000/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number="SERIALNUMBER"

     

    SECOND URL LINE result: 

    {"data":{"activated":true},"success":true}

     

     

    All works fine in Chrom incognito mode.

    Automated RedPill Loader (ARPL)

    in Loaders

    Posted

    4 минуты назад, painkiller895 сказал:

    Intel Ethernet Network Adapter X520-SR2 will work with DS3617, The qlogic card is not comparable with that loader. I'm using the intel card with no problem. Plug and play.

    Only SR2 maybe t1 or t2?

    Automated RedPill Loader (ARPL)

    in Loaders

    Posted

    bnx2 driver loaded but in network controller not visible

     

     bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36 ($DateTime: 2016/06/16 03:53:41 $ 

     iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k 

     

    The New Active Backup

    in Synology Packages

    Posted

    Got it working:

    https://ip:port/webapi/auth.cgi?api=SYNO.API.Auth&version=3&method=login&account=username&passwd=password&format=%20cookie

    at the end leave a space between format =cookie

    so dont use format=cookie, rather format= cookie

     

    https://ip:port/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number=serialno

     

     

    works fine thanks

    10Gbe setup - will this work with 6.1?

    in Hardware Modding

    Posted

    New good sound brocade 10G on 6.2.2 - works fine, but need manipulations.

     

    I try fresh install https://archive.synology.com/download/Os/DSM/6.2.2-24922

    1. unpack https://archive.synology.com/download/Os/DSM/6.2.2-24922 and you need rd and zImage

    2. make loader from https://xpenology.com/forum/topic/21663-driver-extension-jun-103b104b-for-dsm622-for-3615xs-3617xs-918/

    3. on your USB with loader, replace file rd and zImage from unpacking DSM

    3. add extra.lzma from http://www.filedropper.com/extra3617v05test

     

    Works fine. Asrock h110m-dgs G3940 4Gb 

    The New Active Backup

    in Synology Packages

    Posted

    its work, but you need make:

     

    1 - login on DSM, in browser address line, after https://youripsyno:5001/  paste /webapi/auth.cgi?api=SYNO.API.Auth&method=Login&version=1&account=USER&passwd=PASS and ENTER.

     

    efter ENTER you see 

     

    {"success":true}

     

    2- after https://youripsyno:5001/ paste  /webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number="SERIALNUMBER"

     

    after ENTER you see

     

    {"data":{"activated":true},"success":true}

     

    3 - if you want verefy after https://youripsyno:5001/ paste /webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=get&version=1

     

    after ENTER if it OK you see

     

    {"data":{"activated":true,"serial_number":"SERIALNUMBER"},"success":true}

     

    I try paste complete address from forum, not work, but my metod work fine, not close page.

     

     

    • Like 1

    10Gbe setup - will this work with 6.1?

    in Hardware Modding

    Posted

    If you want make cluster and need 10Gb switch, you can make this.

     

    insmod /lib/modules/stp.ko
    insmod /lib/modules/bridge.ko
    brctl addbr br0 // add new bridge
    brctl stp br0 off // stp off
    ifconfig br0 192.168.50.200 netmask 255.255.255.0 up // add address to bridge
    brctl addif br0 eth2 // add adapter one
    brctl addif br0 eth3 // add next adapter
    route add default gw 192.168.50.1 dev br0 // add GW to bridge

     

    and add this to autoboot

    Brocade 10G Xpenology Iscsi + switch

    in Hardware Modding

    Posted

    Good day, if you want fast and cheap ISCSI 10G for PROXMOX, you need brocade 1020, extra lzma for 6.1

    First you need upgrade firmware on 1020 - after, 1020 see all DAC cables.

     

    latest Bios 3.2.7.0 from http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProduct.aspx?ProductCategory=322&Product=1214&Os=194 I use live CD

    You need: 

    make live CD

    boot from CD

     

     
    bcucli                                                                                                         (boot in normal mode)
    bcu adapter —list                                                                                 (double "-", see adapter list)
    bcu adapter —query 1                                                                        (double "-", see firmware)
    bcu boot —update 1 brocade_adapter_boot_fw_v3-2-7-0 (double "-", update bios)
    reboot                                                                                                        (reboot command)
    bcu adapter —query 1                                                                         (double "-", see update BIOS info)

     

     

    Next you need add drivers to bootloader.

     

    1. Windows user need EXT2FSD, install.

    2. Booting USB from xpenology insert PC with EXT2FSD

    3. Assign drive letter to partition.

    4. Find extra.lzma

    5. download latest 4.9 extra.lzma from http://s000.tinyupload.com/?file_id=88305548032449150873 

    6. replace original extra.lzma

    7. remove USB, insert in bare metal and power on.

     

     

     

    Next, you need all lan card for switch, make ip6 - disabled, ip address dhcp (not assignet manually).

    Make switch, eth0 is for managment and assignet manually. eth1 is 1Gb eth2-5 is 10G.

    This is switch 1G - 4x10G its 5USD for 10G port.

    You need make script sh file and place on synology, after you need make shedule:

    Control panel -> Sheduller->add startup task-> path for this script file.

     

    insmod /lib/modules/stp.ko
    insmod /lib/modules/bridge.ko
    brctl addbr br0 
    brctl stp br0 off
    brctl addif br0 eth1
    brctl addif br0 eth2
    brctl addif br0 eth3
    brctl addif br0 eth4

    brctl addif br0 eth5
    route add default gw 192.168.xxx.1 dev br0
    ifconfig br0 192.168.xxx.yyy netmask 255.255.255.0 up

     

    Its working fine. X8SIL-F Xeon 3460 with 4Gb as Xpenology ISCSI and SWITCH

    Iperf3 shows 9.36G in all direction.

    All ISCSI LUNs spinned on SSD mirror raid, snapshoted on HDD. I make one SSD raid - one LUN, for better perfomance.

     

    Before I make 10G switch on vyos.

     

     

     

     

     

     

    • Like 1

    10Gbe setup - will this work with 6.1?

    in Hardware Modding

    Posted

    Its no my but works from this https://gist.github.com/ViKingIX/95db2d154ebcf271f6df2d48d53e79a0

    Get Firmwares

    cd /lib/firmware
    sudo wget http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/plain/{ctfw,ct2fw}-3.2.5.1.bin

    Update initramfs

    sudo update-initramfs -u -k all

    Unload and lacklist bfa module

    echo blaclist bfa | sudo tee /etc/modprobe.d/blaclist-bfa

    Reload bna module

    sudo rmmod bna
    sudo modprobe bna

    10Gbe setup - will this work with 6.1?

    in Hardware Modding

    Posted · Edited by vortexxx

    Its not my, but works fine.

     

    wget http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ctfw-3.2.3.0.bin

    wget http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ct2fw-3.2.3.0.bin

    wget http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/cbfw-3.2.3.0.bin

    cp ctfw-3.2.3.0.bin /lib/firmware/

    cp ct2fw-3.2.3.0.bin /lib/firmware/

    cp cbfw-3.2.3.0.bin /lib/firmware/ ]

    cd /lib/firmware

    ln -s ctfw-3.2.3.0.bin ctfw.bin

    ln -s ct2fw-3.2.3.0.bin ct2fw.bin

    ln -s cbfw-3.2.3.0.bin cbfw.bin

    modprobe -r bna

    modprobe bna

    10Gbe setup - will this work with 6.1?

    in Hardware Modding

    Posted · Edited by vortexxx

    Good day, please can you help me? Its not Xpenology, I try to make 10G switch on VyOS, Its work fine on intel cards, but brocade 1020 cant run, I try to copy ctfw-3.2.1.1.bin to /lib/firmware/ but  its not work

     

    [    1.163499] Brocade 10G Ethernet driver - version: 3.2.21.1
    [    1.163534] bnad_pci_probe : (0xffff88040cb81000, 0xffffffffa0068250) PCI Func : (2)
    [    1.163559] bna 0000:02:00.2: Direct firmware load failed with error -2
    [    1.163561] bna 0000:02:00.2: Falling back to user helper
    [    1.164254] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
    [    1.164257] igb: Copyright (c) 2007-2013 Intel Corporation.
    [    1.164526] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.164530] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [    1.164555] Brocade BFA FC/FCOE SCSI driver - version: 3.2.21.1
    [    1.165673] ahci 0000:05:00.0: version 3.0
    [    1.179108] Can't locate firmware ctfw-3.2.1.1.bin
    [    1.179412] Failed to load Firmware Image!
    [    1.179422] bnad_pci_probe : (0xffff88040cb82000, 0xffffffffa0068250) PCI Func : (3)
    [    1.179433] bna 0000:02:00.3: Direct firmware load failed with error -2
    [    1.179434] bna 0000:02:00.3: Falling back to user helper
    [    1.180579] Can't locate firmware ctfw-3.2.1.1.bin
    [    1.180889] Failed to load Firmware Image!

     

    Please help me.
     

×
×
  • Create New...