[DSM 6.1.x Loader]

First of all thank you Jun and Polanskiman!!! You are doing a great job!

My configuration is a HP Microserver G7 N54L (AMD), 8GB with DSM 6.1.1-15101-4 (Boot 1.02)

I would like to contribute to the other colleagues with my experience.

1. Lost configuration. I had a bad experience with a shutdown, when the NAS turned on with 6.1.1 15101 the system inform me that I lost all configuration. After make a lot of test, I remembered that I have an old disk from my NAS with 6.0.2 version. I’ve cloned the partition /dev/sdx1 (X is the disk with the old system version) over the /dev/sda1, I’ve used the dd command (example: dd if=/dev/sdx1 of=/dev/sda1 bs=1M). After that I booted with the 1.02 and the wizard detect a previous version configurations.

From that moment I have a backup of the /dev/sda1 partition in case of disaster.

 

 

2. Now my little issue: My NAS is working fine with no problems but I’m running over AMD processor with the default option of Intel boot. I’ve tried to use the bzimage in the USB boot stick with not success. The USB stick boot but the NAS not boot. I’ve used the OSFmount to mount add the bzimage.

 

Jun, Polanskiman do you have some news about the AMD option?

 

For the moment the only problem in my case is that I lost 4,6 GB of RAM memory because is reserved, I only able to use 3,4 GB. This lost memory is because I’m using the Intel boot.

 

 

Thank you in advance

[DSM 6.0.2-8451 Update 11]

Bare metal HP Proliant NL54 Gen7 upgraded with no problems.

[DSM6 w/Jun loader-Virtual DSM Manager issues]

Thank you for your post TWiST.

 

I have the same issue that you. I've used the etcdctl command to remove it the cluster.

 

I would like to add to your post :

1. execute ./etcdctl member list

2. Copy the ID, at the first information until the :

3. execute ./etcdctl member remove ID

[DSM 6.1.x Loader]

HP N54L BareMetal 6.0.2 update 9 updated succesfully.

Note: the same of bchuter colleague, in the first reboot the NAS lost the connectivity. After forced reboot the NAS recovered the connectivity and it's working fine with the update 9.