andyrav
-
Posts
28 -
Joined
-
Last visited
Posts posted by andyrav
-
-
Hi
Does anyone have any info on how to Migrate/Upgrade from 6.0.x to 6.1.x
which ever option i select on boot ie reinstall does not give me the migration screen in find.synology.com
the diskstation just boots as normal.
any ideas?
cheers
-
Hi
Running jun's loader v1.1 with DMS 6.0.2-8451 Update 4 everything is working, but the whole system is so so slow.
To get to the gui take 20 seconds same again to login, basically everything you click or access is slow.
System is not doing any diskcheck etc, CPU @ 25% RAM 35%
Running on HP NL45 with 4GB RAM.
any ideas?
-
Slow as in take about 20 seconds to display GUI screen when enter IP of diskstation and about same again to login.
Server shows not doing any drive maintenance, cpu only running around 25% RAM 35%
any ideas?
-
Hi
I have installed version 6.0.4 onto my HP NL54 4GB Ram Baremetal has anyone noticed they whole system been slow? Was fine with DMS 5.2
Cheers
- 1
-
Hi
I am currently on DSM 5.2-5644 Update 5 running on a HP NL54.
Does anyone have any instrunction how to upgrade to DMS 6?
Is it just the case of writing synoboot.img from the DS3615xs 6.0.2 Jun's Mod V1.01.zip to USB and rebooting, then doing the same as before select install/upgrade, then migration from within Synology Assistant?
many thanks
-
Hi
After some help, My Volume1 as a status of NORMAL but it is still saying NUMBER OF DISK FAILED = 1 and DEGRADED. if i Try and swap out the disk that has ERRORS with Smart ABNORMAL when i get NUMBER OF DISK FAILED = 2 and can not repair it. Once i installed the removed disk again it the Volume is NORMAL
running DSM 5.2-5644 Update 5
any ideas?
cheers
-
I have connect a USB wifi dongle which was not detected when i go into DMS. any know the command to find out what drivers are needed?
cheers
andy
-
Hi
i would like to start by VPN connection at a set time via cron and stop at a set time. Does anyone know the command to start/stop the VPN client
I am running DMS 5
cheers
andy
-
Got web and photo working.
from the GUI
Created a new group called 'http' with read/write on web folder
restarted web services
reinstalled Photo Station.
All working... No setting/photos lost in the gallery
-
Got it working.
from the GUI
Created a new group called 'http' with read/write on web folder
restarted web services
reinstalled Photo Station.
All working... No setting/photos lost in the gallery
sweet
-
Upgraded to DMS5 all data still there and it looks to be fixing the raid issue. Like to web service and photo station wont run
any ideas
-
dont know how that has happened.
do you think it is going to be best to start again? guess this way i could use DMS5
-
DiskStation> lvm pvdisplay
--- Physical volume ---
PV Name /dev/md2
VG Name vg1000
PV Size 685.11 GB / not usable 1.19 MB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 175388
Free PE 0
Allocated PE 175388
PV UUID FzLv7t-DA16-xeBu-HoKr-Ye0S-2i1F-9mSCxv
--- Physical volume ---
PV Name /dev/md3
VG Name vg1000
PV Size 3.41 TB / not usable 1.00 MB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 894236
Free PE 0
Allocated PE 894236
PV UUID NLJAYw-rf6e-eUHi-z9Xw-xmLI-hzi0-PmuOLK
--- Physical volume ---
PV Name /dev/md4
VG Name vg1000
PV Size 465.74 GB / not usable 448.00 KB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 119230
Free PE 0
Allocated PE 119230
PV UUID YzXNLl-m1YV-v400-3w3p-eS5o-ZX00-BfyWPT
DiskStation> lvm vgdisplay
--- Volume group ---
VG Name vg1000
System ID
Format lvm2
Metadata Areas 3
Metadata Sequence No 11
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 3
Act PV 3
VG Size 4.54 TB
PE Size 4.00 MB
Total PE 1188854
Alloc PE / Size 1188854 / 4.54 TB
Free PE / Size 0 / 0
VG UUID oLPI1t-z20M-RUm0-rQ5K-OrUB-0w85-5yjEgB
-
cheers
login as: root
root@192.168.0.4's password:
BusyBox v1.16.1 (2014-02-11 20:19:16 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md4 : active raid1 sda7[0] sdc7[1]
488366784 blocks super 1.2 [2/2] [uU]
md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1]
3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU]
md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1]
718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3]
2097088 blocks [12/4] [uUUU________]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3]
2490176 blocks [12/4] [uUUU________]
unused devices:
DiskStation> df -h
Filesystem Size Used Available Use% Mounted on
/dev/md0 2.3G 674.6M 1.6G 29% /
/dev/md0 2.3G 674.6M 1.6G 29% /proc/bus/pci
/tmp 1.9G 972.0K 1.9G 0% /tmp
/dev/sdw1 15.2M 10.0M 4.4M 70% /volumeUSB1/usbshare
/dev/sdv1 931.5G 752.4G 179.2G 81% /volumeUSB2/usbshare
/dev/sdu 1.4T 955.6G 441.7G 68% /volumeUSB3/usbshare
/var 2.3G 674.6M 1.6G 29% /usr/local/zarafa-licensed/var
/dev/vg1000/lv 4.5T 3.1T 1.4T 69% /volume1
DiskStation> lvdisplay
--- Logical volume ---
LV Name /dev/vg1000/lv
VG Name vg1000
LV UUID ySDjQz-e5FC-02Oo-tvE6-RaM8-gX98-JAR2GV
LV Write Access read/write
LV Status available
# open 1
LV Size 4.54 TB
Current LE 1188854
Segments 5
Allocation inherit
Read ahead sectors auto
- currently set to 4096
Block device 253:0
DiskStation>
-
Hi
it now reports the Volume as Normal. With You can expand size to about 5109GB
when i try i get the following error
Any ideas? cheers again
Apr 14 10:04:23 DiskStation volumehandler.cgi: space_internal_lib.c:309 Failed to migrate '/dev/md4' from RAID 1 to RAID 5
Apr 14 10:04:23 DiskStation volumehandler.cgi: space_internal_lib.c:568 Failed to migrate RAID 1 to RAID 5: [/dev/md4] with disk [/dev/sda7]
Apr 14 10:04:23 DiskStation volumehandler.cgi: space_expand_unfinished_shr.c:46 failed to add partition to space: /dev/vg1000/lv [0x0D00 string_sep_pair.c:54]
Apr 14 10:04:23 DiskStation volumehandler.cgi: space_lib.cpp:1453 failed to expand unfinished space: /dev/vg1000/lv [0x0D00 string_sep_pair.c:54]
Apr 14 10:04:23 DiskStation volumehandler.cgi: volumehandler.cpp:633 failed to expand unfinished space: /volume1
-
DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md4 : active raid1 sda7[0] sdc7[1]
488366784 blocks super 1.2 [2/2] [uU]
md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1]
3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_]
[=====>...............] recovery = 25.9% (316227328/1220930752) finish=348.7min speed=43232K/sec
md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1]
718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3]
2097088 blocks [12/4] [uUUU________]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3]
2490176 blocks [12/4] [uUUU________]
unused devices:
-
DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md4 : active raid1 sda7[0] sdc7[1]
488366784 blocks super 1.2 [2/2] [uU]
md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1]
3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_]
[=====>...............] recovery = 25.9% (316227328/1220930752) finish=348.7min speed=43232K/sec
md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1]
718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3]
2097088 blocks [12/4] [uUUU________]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3]
2490176 blocks [12/4] [uUUU________]
unused devices:
-
DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md4 : active raid1 sda7[0] sdc7[1]
488366784 blocks super 1.2 [2/2] [uU]
md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1]
3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_]
[=====>...............] recovery = 25.9% (316227328/1220930752) finish=348.7min speed=43232K/sec
md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1]
718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3]
2097088 blocks [12/4] [uUUU________]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3]
2490176 blocks [12/4] [uUUU________]
unused devices:
-
Nice work, it is now re-synching
fingers crossed
thanks again
-
Disk 1 = ST2000DL003-9VT166 2TB
Disk 2 = ST31500341AS 1.5TB
Disk 3 = ST2000Dm001-1E6164 2TB
Disk 3 = ST2000Dm001-1E6164 2TB THIS WAS THE LAST DISK I ADDED WAS WORKING FINE UNTIL I REPLACED IT
IF YOU CAN FIX YOU ARE A LIVE SAVER
-
Disk 1 = ST2000DL003-9VT166 2TB
Disk 2 = ST31500341AS 1.5TB
Disk 3 = ST2000Dm001-1E6164 2TB
Disk 3 = ST2000Dm001-1E6164 2TB
-
DiskStation> fdisk -l
Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 311 2490240 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary
/dev/sda2 311 572 2097152 fd Linux raid autodetect
Partition 2 does not end on cylinder boundary
/dev/sda3 588 243201 1948788912 f Win95 Ext'd (LBA)
/dev/sda5 589 30401 239464864 fd Linux raid autodetect
/dev/sda6 30402 182401 1220931952 fd Linux raid autodetect
/dev/sda7 182402 243201 488367952 fd Linux raid autodetect
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 311 2490240 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary
/dev/sdb2 311 572 2097152 fd Linux raid autodetect
Partition 2 does not end on cylinder boundary
/dev/sdb3 588 182401 1460412912 f Win95 Ext'd (LBA)
/dev/sdb5 589 30401 239464864 fd Linux raid autodetect
/dev/sdb6 30402 182401 1220931952 fd Linux raid autodetect
Disk /dev/sdc: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 311 2490240 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary
/dev/sdc2 311 572 2097152 fd Linux raid autodetect
Partition 2 does not end on cylinder boundary
/dev/sdc3 588 243201 1948788912 f Win95 Ext'd (LBA)
/dev/sdc5 589 30401 239464864 fd Linux raid autodetect
/dev/sdc6 30402 182401 1220931952 fd Linux raid autodetect
/dev/sdc7 182402 243201 488367952 fd Linux raid autodetect
Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 311 2490240 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary
/dev/sdd2 311 572 2097152 fd Linux raid autodetect
Partition 2 does not end on cylinder boundary
/dev/sdd3 588 243201 1948788912 f Win95 Ext'd (LBA)
/dev/sdd5 589 30401 239464864 fd Linux raid autodetect
/dev/sdd6 30402 182401 1220931952 fd Linux raid autodetect
/dev/sdd7 182402 243201 488367952 fd Linux raid autodetect
Disk /dev/sdu: 1929 MB, 1929379840 bytes
255 heads, 63 sectors/track, 234 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdu1 * 1 2 16033+ 83 Linux
Disk /dev/sdv: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdv1 1 121602 976760832 7 HPFS/NTFS
Note: sector size is 4096 (not 512)
Disk /dev/sdw: 1500.3 GB, 1500301905920 bytes
255 heads, 63 sectors/track, 22800 cylinders
Units = cylinders of 16065 * 4096 = 65802240 bytes
Device Boot Start End Blocks Id System
/dev/sdw1 ? 120528 234814 3049098368 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary
/dev/sdw2 ? 119381 153271 2177748372 73 Unknown
Partition 2 does not end on cylinder boundary
/dev/sdw3 ? 113202 147075 2176700544 2b Unknown
Partition 3 does not end on cylinder boundary
/dev/sdw4 ? 177064 177067 219896 61 Unknown
Partition 4 does not end on cylinder boundary
Partition table entries are not in disk order
DiskStation>
DiskStation> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md4 : active raid1 sda7[0] sdc7[1]
488366784 blocks super 1.2 [2/2] [uU]
md3 : active raid5 sdb6[0] sdc6[3] sda6[1]
3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_]
md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1]
718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3]
2097088 blocks [12/4] [uUUU________]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3]
2490176 blocks [12/4] [uUUU________]
unused devices:
DiskStation>
-
thanks running a full smart now. any ideas what command i need to running to fix?
i have a backup but would be a lot easyier to fix and reinstall.
cheers
-
Hi, Need some urgent help please
I have replace a faulty disk with a new one and after it has finished its repair/ parity checks etc is returns too
The Space is Degraded.
All my drives status say Normal and the smart check are ok.
It then does not have the option to repair again as Managed is grayed out.
running on a hp N54L
any ideas?
cheers
6.2-23739 services not starting
in General Installation Questions/Discussions (non-hardware specific)
Posted
HI
Without reading i upgraded from 6.1 to 6.2-23739 using 1.03b DS3615xs on a HP NL54
Now when i start DISKSTATION none of my services have started, i can access the GUI. if i start a service 2 minutes later it has stopped.
I can see see all my data (few)
Is there a easy way to downgrade back to 6.1? can i just select reinstall and use 6.1 pat file?
many thanks