andyrav

HI Without reading i upgraded from 6.1 to 6.2-23739 using 1.03b DS3615xs on a HP NL54 Now when i start DISKSTATION none of my services have started, i can access the GUI. if i start a service 2 minutes later it has stopped. I can see see all my data (few) Is there a easy way to downgrade back to 6.1? can i just select reinstall and use 6.1 pat file? many thanks

Hi Does anyone have any info on how to Migrate/Upgrade from 6.0.x to 6.1.x which ever option i select on boot ie reinstall does not give me the migration screen in find.synology.com the diskstation just boots as normal. any ideas? cheers

Hi Running jun's loader v1.1 with DMS 6.0.2-8451 Update 4 everything is working, but the whole system is so so slow. To get to the gui take 20 seconds same again to login, basically everything you click or access is slow. System is not doing any diskcheck etc, CPU @ 25% RAM 35% Running on HP NL45 with 4GB RAM. any ideas?

Slow as in take about 20 seconds to display GUI screen when enter IP of diskstation and about same again to login. Server shows not doing any drive maintenance, cpu only running around 25% RAM 35% any ideas?

Hi I have installed version 6.0.4 onto my HP NL54 4GB Ram Baremetal has anyone noticed they whole system been slow? Was fine with DMS 5.2 Cheers

Hi I am currently on DSM 5.2-5644 Update 5 running on a HP NL54. Does anyone have any instrunction how to upgrade to DMS 6? Is it just the case of writing synoboot.img from the DS3615xs 6.0.2 Jun's Mod V1.01.zip to USB and rebooting, then doing the same as before select install/upgrade, then migration from within Synology Assistant? many thanks

Hi After some help, My Volume1 as a status of NORMAL but it is still saying NUMBER OF DISK FAILED = 1 and DEGRADED. if i Try and swap out the disk that has ERRORS with Smart ABNORMAL when i get NUMBER OF DISK FAILED = 2 and can not repair it. Once i installed the removed disk again it the Volume is NORMAL running DSM 5.2-5644 Update 5 any ideas? cheers

I have connect a USB wifi dongle which was not detected when i go into DMS. any know the command to find out what drivers are needed? cheers andy

Hi i would like to start by VPN connection at a set time via cron and stop at a set time. Does anyone know the command to start/stop the VPN client I am running DMS 5 cheers andy

Got web and photo working. from the GUI Created a new group called 'http' with read/write on web folder restarted web services reinstalled Photo Station. All working... No setting/photos lost in the gallery

Got it working. from the GUI Created a new group called 'http' with read/write on web folder restarted web services reinstalled Photo Station. All working... No setting/photos lost in the gallery sweet

Upgraded to DMS5 all data still there and it looks to be fixing the raid issue. Like to web service and photo station wont run any ideas

dont know how that has happened. do you think it is going to be best to start again? guess this way i could use DMS5

DiskStation> lvm pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name vg1000 PV Size 685.11 GB / not usable 1.19 MB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 175388 Free PE 0 Allocated PE 175388 PV UUID FzLv7t-DA16-xeBu-HoKr-Ye0S-2i1F-9mSCxv --- Physical volume --- PV Name /dev/md3 VG Name vg1000 PV Size 3.41 TB / not usable 1.00 MB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 894236 Free PE 0 Allocated PE 894236 PV UUID NLJAYw-rf6e-eUHi-z9Xw-xmLI-hzi0-PmuOLK --- Physical volume --- PV Name /dev/md4 VG Name vg1000 PV Size 465.74 GB / not usable 448.00 KB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 119230 Free PE 0 Allocated PE 119230 PV UUID YzXNLl-m1YV-v400-3w3p-eS5o-ZX00-BfyWPT DiskStation> lvm vgdisplay --- Volume group --- VG Name vg1000 System ID Format lvm2 Metadata Areas 3 Metadata Sequence No 11 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 3 Act PV 3 VG Size 4.54 TB PE Size 4.00 MB Total PE 1188854 Alloc PE / Size 1188854 / 4.54 TB Free PE / Size 0 / 0 VG UUID oLPI1t-z20M-RUm0-rQ5K-OrUB-0w85-5yjEgB

cheers login as: root root@192.168.0.4's password: BusyBox v1.16.1 (2014-02-11 20:19:16 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid1 sda7[0] sdc7[1] 488366784 blocks super 1.2 [2/2] [uU] md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1] 3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1] 718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices: DiskStation> df -h Filesystem Size Used Available Use% Mounted on /dev/md0 2.3G 674.6M 1.6G 29% / /dev/md0 2.3G 674.6M 1.6G 29% /proc/bus/pci /tmp 1.9G 972.0K 1.9G 0% /tmp /dev/sdw1 15.2M 10.0M 4.4M 70% /volumeUSB1/usbshare /dev/sdv1 931.5G 752.4G 179.2G 81% /volumeUSB2/usbshare /dev/sdu 1.4T 955.6G 441.7G 68% /volumeUSB3/usbshare /var 2.3G 674.6M 1.6G 29% /usr/local/zarafa-licensed/var /dev/vg1000/lv 4.5T 3.1T 1.4T 69% /volume1 DiskStation> lvdisplay --- Logical volume --- LV Name /dev/vg1000/lv VG Name vg1000 LV UUID ySDjQz-e5FC-02Oo-tvE6-RaM8-gX98-JAR2GV LV Write Access read/write LV Status available # open 1 LV Size 4.54 TB Current LE 1188854 Segments 5 Allocation inherit Read ahead sectors auto - currently set to 4096 Block device 253:0 DiskStation>

Hi it now reports the Volume as Normal. With You can expand size to about 5109GB when i try i get the following error Any ideas? cheers again Apr 14 10:04:23 DiskStation volumehandler.cgi: space_internal_lib.c:309 Failed to migrate '/dev/md4' from RAID 1 to RAID 5 Apr 14 10:04:23 DiskStation volumehandler.cgi: space_internal_lib.c:568 Failed to migrate RAID 1 to RAID 5: [/dev/md4] with disk [/dev/sda7] Apr 14 10:04:23 DiskStation volumehandler.cgi: space_expand_unfinished_shr.c:46 failed to add partition to space: /dev/vg1000/lv [0x0D00 string_sep_pair.c:54] Apr 14 10:04:23 DiskStation volumehandler.cgi: space_lib.cpp:1453 failed to expand unfinished space: /dev/vg1000/lv [0x0D00 string_sep_pair.c:54] Apr 14 10:04:23 DiskStation volumehandler.cgi: volumehandler.cpp:633 failed to expand unfinished space: /volume1

DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid1 sda7[0] sdc7[1] 488366784 blocks super 1.2 [2/2] [uU] md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1] 3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_] [=====>...............] recovery = 25.9% (316227328/1220930752) finish=348.7min speed=43232K/sec md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1] 718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices:

DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid1 sda7[0] sdc7[1] 488366784 blocks super 1.2 [2/2] [uU] md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1] 3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_] [=====>...............] recovery = 25.9% (316227328/1220930752) finish=348.7min speed=43232K/sec md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1] 718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices:

DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid1 sda7[0] sdc7[1] 488366784 blocks super 1.2 [2/2] [uU] md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1] 3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_] [=====>...............] recovery = 25.9% (316227328/1220930752) finish=348.7min speed=43232K/sec md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1] 718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices:

Nice work, it is now re-synching fingers crossed thanks again

Disk 1 = ST2000DL003-9VT166 2TB Disk 2 = ST31500341AS 1.5TB Disk 3 = ST2000Dm001-1E6164 2TB Disk 3 = ST2000Dm001-1E6164 2TB THIS WAS THE LAST DISK I ADDED WAS WORKING FINE UNTIL I REPLACED IT IF YOU CAN FIX YOU ARE A LIVE SAVER

Disk 1 = ST2000DL003-9VT166 2TB Disk 2 = ST31500341AS 1.5TB Disk 3 = ST2000Dm001-1E6164 2TB Disk 3 = ST2000Dm001-1E6164 2TB

DiskStation> fdisk -l Disk /dev/sda: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 311 2490240 fd Linux raid autodetect Partition 1 does not end on cylinder boundary /dev/sda2 311 572 2097152 fd Linux raid autodetect Partition 2 does not end on cylinder boundary /dev/sda3 588 243201 1948788912 f Win95 Ext'd (LBA) /dev/sda5 589 30401 239464864 fd Linux raid autodetect /dev/sda6 30402 182401 1220931952 fd Linux raid autodetect /dev/sda7 182402 243201 488367952 fd Linux raid autodetect Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 311 2490240 fd Linux raid autodetect Partition 1 does not end on cylinder boundary /dev/sdb2 311 572 2097152 fd Linux raid autodetect Partition 2 does not end on cylinder boundary /dev/sdb3 588 182401 1460412912 f Win95 Ext'd (LBA) /dev/sdb5 589 30401 239464864 fd Linux raid autodetect /dev/sdb6 30402 182401 1220931952 fd Linux raid autodetect Disk /dev/sdc: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 311 2490240 fd Linux raid autodetect Partition 1 does not end on cylinder boundary /dev/sdc2 311 572 2097152 fd Linux raid autodetect Partition 2 does not end on cylinder boundary /dev/sdc3 588 243201 1948788912 f Win95 Ext'd (LBA) /dev/sdc5 589 30401 239464864 fd Linux raid autodetect /dev/sdc6 30402 182401 1220931952 fd Linux raid autodetect /dev/sdc7 182402 243201 488367952 fd Linux raid autodetect Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 311 2490240 fd Linux raid autodetect Partition 1 does not end on cylinder boundary /dev/sdd2 311 572 2097152 fd Linux raid autodetect Partition 2 does not end on cylinder boundary /dev/sdd3 588 243201 1948788912 f Win95 Ext'd (LBA) /dev/sdd5 589 30401 239464864 fd Linux raid autodetect /dev/sdd6 30402 182401 1220931952 fd Linux raid autodetect /dev/sdd7 182402 243201 488367952 fd Linux raid autodetect Disk /dev/sdu: 1929 MB, 1929379840 bytes 255 heads, 63 sectors/track, 234 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdu1 * 1 2 16033+ 83 Linux Disk /dev/sdv: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdv1 1 121602 976760832 7 HPFS/NTFS Note: sector size is 4096 (not 512) Disk /dev/sdw: 1500.3 GB, 1500301905920 bytes 255 heads, 63 sectors/track, 22800 cylinders Units = cylinders of 16065 * 4096 = 65802240 bytes Device Boot Start End Blocks Id System /dev/sdw1 ? 120528 234814 3049098368 7 HPFS/NTFS Partition 1 does not end on cylinder boundary /dev/sdw2 ? 119381 153271 2177748372 73 Unknown Partition 2 does not end on cylinder boundary /dev/sdw3 ? 113202 147075 2176700544 2b Unknown Partition 3 does not end on cylinder boundary /dev/sdw4 ? 177064 177067 219896 61 Unknown Partition 4 does not end on cylinder boundary Partition table entries are not in disk order DiskStation> DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid1 sda7[0] sdc7[1] 488366784 blocks super 1.2 [2/2] [uU] md3 : active raid5 sdb6[0] sdc6[3] sda6[1] 3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [uUU_] md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1] 718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices: DiskStation>

thanks running a full smart now. any ideas what command i need to running to fix? i have a backup but would be a lot easyier to fix and reinstall. cheers

Hi, Need some urgent help please I have replace a faulty disk with a new one and after it has finished its repair/ parity checks etc is returns too The Space is Degraded. All my drives status say Normal and the smart check are ok. It then does not have the option to repair again as Managed is grayed out. running on a hp N54L any ideas? cheers