neonflx

Members
  • Content Count

    68
  • Joined

  • Last visited

Posts posted by neonflx

  1. Just wait a day or two and then report again :wink:

     

     

    everything still working even my mellanox that did not work before

     

    No volume crashes or funky messages?

     

     

    none so far , the only thing i needed to do was delete my 3rd party sources and add them again, and IDS wasn't compatible so i deleted it

  2. Updated to 6.1 using Alpha loader without any issues, no weird messages and everything works ok.

     

    Bare Metal, LSI 9211-8 on ASROCK board Xeon CPU 8 3tb, didn't loose any data.

     

    Just wait a day or two and then report again :wink:

     

     

    everything still working even my mellanox that did not work before

  3. Updated to 6.1 using Alpha loader without any issues, no weird messages and everything works ok.

     

    Bare Metal, LSI 9211-8 on ASROCK board Xeon CPU 8 3tb, didn't loose any data.

  4. so yeah why people insist on something that is broken is beyond me, i'm running jun's loader on bare metal on asrock with quad i210, xeon e3 32gb ecc and 8 x 3tb WD red and M1015 on HBA, my point (besides bragging a little haha) is that with a bit of effort everything pretty much works with jun's loader, yes it will be nice when 2.3 is release and we gain further ability to run a wider range of hardware but until then your best bet is jun's loader

  5. I tried using the latest loader release on bare metal without luck, can't find it on network, I tried the internal quad 210 nic and pci-e quad intel neither get recognized on prior loaders either and finally tried the single intel that works on jun 1.01 loader but don't seem to work on the latest loader at least for me.

     

    any suggestions?

    thanks

  6. need help getting a quad nic card working, I have a Dell 0YT674, which uses intel 82575 drivers, it is recognized but can't pull an ip address, the same with my onboard quad i210,

     

    i can see them on the info center under network but can't pull an ip, i'm also using a single intel nic which works ok.

     

    i tried adding mac1, mac2, mac3, etc. or none at all, and still can't pull an ip

     

    any suggestions?

  7. so in addition to a quad 210i i have a PRO/1000 MT Quad Port Server Adapter (Dell 0YT674) which uses the intel 82575 driver, and while they get recognized I can't pull an ip, always default to 169.x.x.x any suggestions,

     

    i tried with 1 thru 4 nic mac addresses no luck

  8. So I tried reversing the order ramdisk.lzma gets loaded in order to get i210 nic to work but every time i tried my 9211-8i will not get recognized

     

    Is there any other way for the i210 to work?

  9. has anyone been able to get 2 or more Nic's working, I have a single card that is recognized and I have tried 2 quad cards 210i and older intel pro quad and while they are recognized I can't get an ip,

  10. So i tried to boot on my server with C2750D4I

    here my report

    it boots but nic seems to not work (nothing appear on my network)

    Is Intel® i210 driver in ? if yes, seems to not work

     

     

    My quad 210i is recognized however I can't never pull an ip, had to used an old single intel pro bare metal

  11. I migrated and it is working ok

    Please can you provide more details on how you did this? I thought LSI cards weren't supported yet.

     

     

    The LSI works with the latest loader, I have to disabled the onboard controller in order to recognized the 8 hd attached to it, before disabling the onboard controllers I was seen 6 HD and 2 as external, once I disabled the onboard and saw all 8 HD I was able to migrate.

     

    LSI 9211-81

  12. anyone figured out how to get more than one nic working,

    neither my onboard quad intel 210 works or my intel quad pci-e ,

    I can only get a single intel pro pci-e card to work

    when enabling either the onboard or the quad pci-e in conjunction with the single pci-e nic I can see all nic's on the info dashboard but they all are getting 169.x.x.x addresses, except the single card which get a good ip

    I tried adding mac1-mac4 & mac1-mac5 and still does not work

     

    any suggestions?

  13. what parameters to use with an LSI 9211-8i HBA 8 hd attached to it.

     

    I'm only able to see 6 hd available to install, once I installed it I was able to see that the additional 2 hd are been counted as ext hd,

     

    how can i make it see the 8 hd attached to the 9211-8i during install

     

     

    I disabled the onboard Sata and now I'm able to see all 8 hd connected to the 9211-8i, I would like to enable the onboard Sata to attached to SSds for cache, any suggestions?

     

    thanks

  14. so here is my issue with v1 I can find my DSM and gives me the option to install however, it only sees my two SSDs attached to the onboard controller, it does not see 8 3TB attached to 9211-8i.

     

    with V2 I been trying for 2 days to get it to work but I can never find DSM, doesn' get an IP. I tried many configurations without luck.

     

    My mobo is an E3C224-4L, 32 GB ECC and LSI 9211-8i HBA mode, 8 3TB WD Red and 2 128gb SSD for cache

     

    I tried disabling on board sata controllers, disabling on board lan and installing an intel nic know to be compatible, again with V1 i can boot find DSM and install, issue is can't see HD attached to LSI controller, with V2 can't find DSM period.

     

    mobo specs

     

    2 x PCIe 3.0 x16, 1 x PCIe 3.0 x4, 1 x PCIe 2.0 x1, 2 x PCI

    4 x SATA3, 2 SATA2 by Intel C224 support RAID 0,1,5,10

    2 x SATA3 by Marvell 9172 support RAID 0,1

    4 x Intel i210, support Quad GLAN

    ASPEED 2300 for BMC controller, Realtek RTL8211E for dedicated IPMI GLAN

    4 x USB 3.0 ports (2 rear + 2 via header )

    7 x USB 2.0 ports (2 rear + 4 via header +1 Type A)

     

    any suggestions?

    thanks