dml33

Hi. I finally made it work by connecting it DVI-DVI to a different monitor. What resolution uses Xpenoboot? Just after decompressing the zImage and booting up, when Xpenoboot label is displayed and everything is detected. There must be a handshake problem regarding the resolution/video driver when I was connecting it to a 720p TV HDMI-HDMI or HMDI-DVI to a LG 19'' Wide-screen 1440x900. It hung all the time. Anyway, it would be nice if Xpenoboot could boot anyway so, in case of a problem in that phase, could use a VESA safe resolution or the exception could managed somehow so the booting process continued. Ah, I used a USB 2.0 pendrive and it worked flawlessly in all USB3 and USB2 ports. Regards.

Hi. I have tried the 6 ports at the rear panel: 2 USB2 and 4 USB3, plus 1 USB 2 and 1 USB 3 at the front of the case. In all of them, the grub menu appears, the Loading /zImage... OK, as well, but it always stops there... I have default UEFI settings in BIOS. (V1.30). Also, I tried disabling WIFI signal, com serial and setting primary VGA onboard. I have connected the PC to a TV via HDMI-HDMI and DVI-Hdmi. Also, to a monitor HDMI-DVI. Any more ideas? If it works for you, please help me to find the correct way Thanks!

Also, I have just tried the new XPEnoboot_DS3615xs_5.2-5644.4.img and it hangs too. If I add debug mode, it appears: Loading /zImage... ok early console in setup code And it hangs.

Hi. Thanks for the reply. I tried with a USB 2.0 pendrive in both USB2 and USB3 ports, but it did not boot from any. I have also tried NanoBoot-5.0.3.1-fat.img If I select debug mode, after the dots and the "ready", "early console in setup code" appears, and it hangs there. Firstly, I thought it could be VGA related, so I used vga=ask instead of vga=0x305, but nothing happens. It hangs anyway, even without the prompt which let you list and choose the desired vga mode. (I saw what should appear with the vga=ask by booting it in VirtualBox. There, it works perfectly). I tried "ubuntu-15.10-desktop-amd64.iso". It boots in UEFI mode perfectly and works correctly. If you want, I can post a dmesg. What else do you want me to try? Thanks.

Hi. I am trying to install XPEnology on a N3150-ITX, but I cannot make it even boot. It gets stuck in "Loading zImage OK". From http://download.xpenology.fr I have tried: XPEnoboot_DS3615xs_5.1-5055.1.img XPEnoboot_DS3615xs_5.2-5565.2.img XPEnoboot_DS3615xs_5.2-5592.2.img From http://xpenology.pety.me/ I tried an old NanoBoot. It also loads the zImage and gets stuck at "ready". It does not boot either. NanoBoot-5.0.4.1-fat.img FreeNAS 9.3.1. boots correctly (with xhci_load flag enabled). I also tested successfully the RAM memory with MemTest86. All images boot correctly in VirtualBox. In the General Discussion section, somebody said that there could a problem with some missing drivers. Please, tell me how to proceed to give you as many details/data as possible to make it work. Thank you in advance.

Hola. Estoy intentando instalar XPEnology en una placa N3150-itx, pero siempre se queda colgado en "Loading zImage" He probado las siguientes imágenes de http://download.xpenology.fr grabadas en un pendrive: XPEnoboot_DS3615xs_5.1-5055.1.img XPEnoboot_DS3615xs_5.2-5565.2.img XPEnoboot_DS3615xs_5.2-5592.2.img De http://xpenology.pety.me/ he probado también con NanoBoot. Hace parecido. Carga la imagen, salen un montón de puntos y se queda en "ready". No es capaz de arrancarla... NanoBoot-5.0.4.1-fat.img Qué puedo hacer? FreeNAS 9.3.1 arranca correctamente y he testeado la memoria con MemTest86 y todo correcto. Gracias!

Hi. I am just trying to install XPEnology in a N3150-itx motherboard, but, every time it gets stuck in "Loading zImage" From http://download.xpenology.fr I have tried: XPEnoboot_DS3615xs_5.1-5055.1.img XPEnoboot_DS3615xs_5.2-5565.2.img XPEnoboot_DS3615xs_5.2-5592.2.img From http://xpenology.pety.me/ I tried an old NanoBoot. It also loads the zImage and gets stuck at "ready". It does not boot either NanoBoot-5.0.4.1-fat.img FreeNAS 9.3.1. boots correctly. I also tested successfully the RAM memory with MemTest86. Could anyone help me? Thanks!