trek102
-
Posts
65 -
Joined
-
Last visited
Posts posted by trek102
-
-
Does anyone know which Linux package Synology uses for their Folder Encryption.
The most commonly used package is LUKS but I believe it can only encrypt an entire disk so Syno must use something else.
-
I have installed DSM 7.1. 42661 running really well.
When I install Notestation, the import of my existing Notes stops at 42% and never completes.
Has anyone seen this?
Any ideas to solve it?
-
Yes you are correct. that’s exactly how it works. I think it’s very misleading by Synology to advertise so proudly that they now support multiple domains. It makes people think they really separate them as separate domains. Dumping all incoming mail from different domains into one mailbox is not multi domain support.
-
Has anyone successfully managed to run Mailserver Plus with more than 1 domain?
-
Has anyone successfully setup MailPLus with 2 different domains? My emails always end up in both mailboxes.
I tried and mail send/receive works fine but all receiving emails end up in the same mailbox.
Settings:
1 user "testuser" setup in DSM
2 domains setup in MailPlus under domain dom1.com and dom2.com
When I send an email to testuser@dom1.com, that email is visible in both mailboxes testuser@dom1.com and testuser@dom2.com
Strangely, when I connect via IMAP client to one mailbox and view the email, it then shows as "viewed" status in the other mailbox.
Does anyone have any experience with mail setup?
-
On 10/12/2021 at 12:40 PM, StanTheMan said:
Check this out for solution: https://github.com/SynoCommunity/spksrc/issues/4897
Essentially this commands can fix it:
# ssh to your NAS first sudo -i mv /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt.bak curl -Lko /etc/ssl/certs/ca-certificates.crt https://curl.se/ca/cacert.pem
worked !!! thank you
-
Thanks - Has anyone manage to get additional licenses via Xpenology or an app?
-
Hello All,
Has anyone managed to install a Virtual DSM Machine on DSM7?
I currently run DSM7.0 on 3622xs+ and Virtual Machine Manager works well.
Does anyone know how to get a Virtual DSM Image?
-
Just to share some experience with the DS3622xs+ loader and how to get a SAS HBA controller to work:
I use a Xeon based server (32GB Ram) with SAS Controller in HBA mode, connecting 4x 3GB SAS Hds. The 4 HDs were configured in DSM6.2 as 1 Volume in RAID10. The Forum here says that in DSM7 HBA adapters are not yet supported but I got it to work as follows:
- when configuring the Redpill loader I had to run the satamap command and despite the reported errors, the loader found my HDs after a few trials. Te loader does not detect any HDs if I omit running the satamap command so this is the essential step although it creates an error message stating that "there will be problems".
- after booting, DSM7 immediately detected my old Volume-1 but reported 2 out of 4 disks inside the RAID10 as defect
- nevertheless, all data on Volume 1 was available and accessible, even while the 2 HDs were reported as defect.
- I integrated the 2 ("defect") HDs via the DSM Storage Manager normal procedure to rebuild a RAID Volume
- This took 5-6h to rebuild and showed no errors. All 4 HDs are live as RAID10 again
- Since then the RAID10 runs under DSM7 without any issues
-
1
-
-
ok thanks and thanks for all your excellent work on these loaders.
-
1 hour ago, Peter Suh said:
Try it with this loader.
https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.3.0-1
thanks - I found the compiled loader on the git link. Would be great to have it directly in the Xpenology post.
-
Hi - Many thanks for your work here.
And apologies. Where would you like me to post in future?
Also, I cannot find my old posts you have moved. I have updates/solutions which I would like to share.
-
Hi everyone - I have managed to build and start DSM7 via the new loader but after booting Synology says my Volume is degraded. It seems that Synology only detects 3 of my 4 Harddisks and cannot repair the Volume unless I add another harddisk.
Since only 1 HD is missing, is there a way that I can manually add that drive to the loader?
I am using a SAS controller in HBO Mode managing all 4 HDs.
many thanks!
-
Hi - I run a Server with SAS Adapter (in HBA mode) that worked fine with 4 HDs attached.
Will this not work with Redpill DSM7 Loader?
-
I run Xpenology on DSM 6.1 and recently upgraded the PHP74 package. The upgrade seems to have several bugs and I cannot start applications depending on PHP.
Is there a way to rollback a package upgrade?
-
None of the links seem to give me access to a DSM 7 loader img.
Where can i find this please?
-
Tinycore-redpill Loader for DSM7.0 img file seems not available on any link.Is there an issue?img files are on Gtlab
-
worked for me on DSM 6.2-23739
thank you very much !!
-
Hello All,
I am on DMS 6.2-23739
I am struggling to get any SSL certificates running inside Xpenology.
When ever I try to add a certificate in Control Panel - Certificate- Get Certificate from Let's encrypt, I get this error message:
"No response from the destination server"
The ports are all open.
Has anyone seen this?
Any tips?
Many thanks
-
I have installed a webserver and recently rebooted the NAS. NOw I am getting an "error 503" webpage when ever I try to access.
Any ideas where I could look?
I have installed the following packages: Apache 2.4, PHP7.4, phpMyAdmin, MariaDB
I re-installed Apache and PHP but still getting the same error.
-
Has anyone successfully installed Nextcloud and Talk on Xpenology?
-
ok thanks for pointing this out.
But on an Xpenology there are not update operations so I'd expect this to run without
-
ok. So USB can be removed for ongoing operation but need to insert for rebooting?
-
Is it possible after installing 6.2.23739 via USB stick and 2 HDs, to remove the USB stick?
Does Xpenology need the USB stick inserted after booting?
Synology Encryption
in Software Modding
Posted
Thanks for sharing. Very helpful.