trying to install DS3622xs+ in a Proxmox vm

[trevmlt1]

I am trying to install DS3622xs+ in a Proxmox vm. I have tried with both passed through hard drives, and virtual disks (both SATA and as an experiment, SCSI). In watching the console, things go sideways here (I compared console output to a working 3615 installation using Redpill and TC):

 

Running /usr/syno/etc/rc.d/J03ssdpd.sh...
[   28.042093] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
/usr/bin/minissdpd -i eth0
[   28.046248] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-3234a5beed2c::upnp:rootdevice
(60): Synology/synology_broadwellnk_3622xs+/7.1-42661/10.168.2.242
(45): http://10.168.2.242:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 10.168.2.242 3234a5beed2c 7.1-42661 synology_broadwellnk_3622xs+ eth0
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
[   28.085033] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
[   28.087964] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
ADT Set FAN SPEED
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 41: can't create /tmp/ADTFanPath//pwm1_high_freq: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 43: can't create /tmp/ADTFanPath//pwm1_syno_control: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 50: can't create /tmp/ADTFanPath//pwm1: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 41: can't create /tmp/ADTFanPath//pwm2_high_freq: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 43: can't create /tmp/ADTFanPath//pwm2_syno_control: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 50: can't create /tmp/ADTFanPath//pwm2: nonexistent directory
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
[   28.110277] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities

 

Any idea what would be causing this? I have folllowed same process for the 3622 installation as my working 3615, but due to these errors while installing, the 3622 says no disks installed when going to the ip address of the newly created 3622 and trying to install the img

 

In the terminal, the following just keeps repeating over and over once the 3622 vm is booted up:

 

SynologyNAS login: [   31.508279] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   31.512853] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   31.856901] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   31.861286] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   31.896898] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   31.899604] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   31.913092] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   31.915862] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   31.947043] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
[   31.949552] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY
[   31.951414] <redpill/smart_shim.c:334> sd_ioctl(HDIO_DRIVE_CMD ; ATA_CMD_ID_ATA) failed with error=-22, attempting to emulate something
[   31.953917] <redpill/smart_shim.c:274> Generating completely fake ATA IDENTITY

 

Help!

 

Edited September 14, 2022 by trevmlt1

[trevmlt1]

I figured this out. Basically it was a sataportmap problem, combined with trying to install from a sata drive (would not work unless I installed using USB for some reason.