DSM_DS3617xs_23739,sata5 and sata6 on the host cannot be recognized after they are connected to the hard disk!


Recommended Posts

hello everyone!

I'm a novice. I recently encountered a problem. After repeated tossing, I still can't solve it. I came here to consult an expert! The questions are as follows:

Recently, it was found that sata5 and sata6 on the host cannot be recognized after they are connected to the hard disk!

Other descriptions:

1. Using USB to do 1.03 boot DSM_ DS3617xs_ twenty-three thousand seven hundred and thirty-nine

2. The motherboard is the AMD platform Biostar t790, which has been connected to four hard disks and uses the interface sata1-4.

3. Grub.cfg file is as follows:

if serial --port=0x3F8 --speed=115200;then
        set has_serial=true
        terminal_input --append serial
        terminal_output --append serial
else
        clear
fi

terminal_input --append console
terminal_output --append console

if [ x"${grub_platform}" = xefi ]; then
        insmod efi_gop
        insmod efi_uga
else
        insmod vbe
fi

set extra_initrd="extra.lzma"
set info="info.txt"

set vid=0x*****
set pid=0x*****
set sn=********8
set mac1=0011********
set rootdev=/dev/md0
set netif_num=1
#set extra_args_3617='earlycon=uart8250,io,0x3f8,115200n8 earlyprintk loglevel=15'
set extra_args_3617=''

set common_args_3617='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1'

set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=1 SasIdxMap=0'

set default='0'
set timeout='1'
set fallback='1'

if [ -s $prefix/grubenv ]; then
        load_env
        if [ -n "$saved_entry" ]; then
                set default="${saved_entry}"
        fi
fi

VERSION="with Jun's Mod v1.03b"

search --file -s /bzImage

function savedefault {
        if [ -s $prefix/grubenv  ]; then
                saved_entry="${chosen}"
                save_env saved_entry
        fi
}

function do_option {
        if [ $# -lt 2 ]; then
                eval "set value=\"\$$1\""
                echo "current $1: $value"; return;
        fi
        set key=$1
        shift
        set $key="$*"
        if [ -s $prefix/grubenv  ]; then
                save_env $key
        fi
}

function vid { do_option vid $@; }
function pid { do_option pid $@; }
function sn { do_option sn $@; }
function mac1 { do_option mac1 $@; }
function mac2 { do_option mac2 $@; }
function mac3 { do_option mac3 $@; }
function mac4 { do_option mac4 $@; }
function rootdev { do_option rootdev $@; }
function append { do_option extra_args_3617 $@; }

function vidpid {
        if [ $# -lt 2 ]; then
                echo "usage: vidpid 0xVVVV 0xPPPP"; return;
        fi
        set usb_args="vid=$1 pid=$2"
        if [ -s $prefix/grubenv  ]; then
                save_env usb_args
        fi
}

function showtips {
        if [ -n "$has_serial" ]; then
                terminal_output --remove serial
        fi
        echo "Screen will stop updating shortly, please open http://find.synology.com to continue."
        echo
        echo
        if [ -n "$has_serial" ]; then
                terminal_output --append serial
        fi
}

function loadinitrd {
        if [ -s $img/$info ]; then
                if [ -n "$has_serial" ]; then
                        terminal_output --remove serial
                fi
                cat $img/$info
                if [ -n "$has_serial" ]; then
                        terminal_output --append serial
                fi
        fi
#        if [ -s $img/$extra_initrd ]; then
#                initrd $img/rd.gz $img/$extra_initrd
#        else
#                initrd $img/rd.gz
#        fi
}

function common_add_option {
        eval "set value=\"\$$1\""
        if [ -z $value ]; then return 1; fi
        set common_args="$common_args $1=$value"
}

function common_add_option_ex {
        eval "set value=\"\$$1\""
        if [ -z $value ]; then return 1; fi
        set common_args="$common_args $2=$value"
}

function loadlinux {
        set model=$1
        set bootdev=$2
        shift 2
        if [ -n $vid -a -n $pid ]; then
                set usb_args="vid=$vid pid=$pid"
        fi
        eval "set common_args=\"\$common_args_$model\""
        eval "set extra_args=\"\$extra_args_$model\""
        eval "set bootdev_args=\"\$${bootdev}_args\""
        common_add_option_ex rootdev root
        common_add_option sn
        if common_add_option mac1; then set netif_num=1; fi
        if common_add_option mac2; then set netif_num=2; fi
        if common_add_option mac3; then set netif_num=3; fi
        if common_add_option mac4; then set netif_num=4; fi
        common_add_option netif_num
    if [ -z $zImage ]; then
        set zImage=bzImage
    fi
        linux $img/$zImage $common_args $bootdev_args $extra_args $@
}

menuentry "DS3617xs 6.2 Baremetal $VERSION" --class os {
        set img=
        savedefault
        loadlinux 3617 usb
        loadinitrd
        showtips
}

menuentry "DS3617xs 6.2 Baremetal $VERSION Reinstall" --class os {
        set img=
        loadlinux 3617 usb mfg
        loadinitrd
        showtips
}

#menuentry "DS3617xs 6.2 Baremetal AMD $VERSION" --class os {
#        set img=
#        set zImage=bzImage
#        savedefault
#        loadlinux 3617 usb
#        loadinitrd
#        showtips
#}

menuentry "DS3617xs 6.2 VMWare/ESXI $VERSION" --class os {
        set img=
        savedefault
        loadlinux 3617 sata
        loadinitrd
        showtips
}
 

 

 

 

 

Looking forward to the guidance of experts, thank you!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.