xpenew Posted June 27, 2015 Share #1 Posted June 27, 2015 I have a AMD A10-5800K APU but Xpenology sees it as an INTEL Core i3-4130 screeshot (http://postimg.org/image/z3d0dhe4r/) But when I ssh into Xpenology box and run these commands: // number of core >cat /proc/cpuinfo | grep processor | wc -l > 4 > //get actual number of cores > cat /proc/cpuinfo | grep 'core id' core id : 0 core id : 1 core id : 2 core id : 3 > > //detail about cores > cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 16 model name : AMD A10-5800K APU with Radeon(tm) HD Graphics stepping : 1 microcode : 0x6001119 cpu MHz : 3800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 16 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes **snipped output for brevity** Anyone have ideas about this discrepancy? Link to comment Share on other sites More sharing options...
bglf83 Posted June 27, 2015 Share #2 Posted June 27, 2015 the i3 is hard coded based on the description of the box the image was made for. Do not worry, it will perform fine. Link to comment Share on other sites More sharing options...
xpenew Posted June 27, 2015 Author Share #3 Posted June 27, 2015 Ahh I see. Good to know. So it is only cosmetic discrepancy and it will actually make use of the four cores. Thank you for the reply. Link to comment Share on other sites More sharing options...
Recommended Posts