holybabel Posted March 4, 2015 Share #1 Posted March 4, 2015 Hi everyone, i have a Scaleo Home Server aka Intel SS4200. This devices has a 256MB PATA DOM-Module. I use the module as boot device for xpenology. To access this pata device i currently use a live usb stick. Then i can write the img from XPEnoboot to the device. Within xpenology i can't see the device under configuration. Is it possible to access (maybe with putty) the device from within xpenology so i don't need the live usb stick anymore? It is very annoying to always detour over the usb live stick. I already tried to 'find' the pata device with putty but fdisk only shows my 3 scsi drives. 'parted' also shows only my 3 scsi drives. Greetings holybabel Link to comment Share on other sites More sharing options...
holybabel Posted February 12, 2016 Author Share #2 Posted February 12, 2016 Can anybody help me with this one? It's really annoying to always use a linux live stick. Link to comment Share on other sites More sharing options...
sbv3000 Posted February 12, 2016 Share #3 Posted February 12, 2016 If you have flashed the DOM as a bootable device with the XPE image, and its set correctly as the boot device in the bios then it should work. If you still need an external boot device it sounds like the DOM is not setup correctly. How did you flash the DOM with the XPE image? Link to comment Share on other sites More sharing options...
pastrychef Posted February 12, 2016 Share #4 Posted February 12, 2016 Even when the DOM has the XPE boot loader, the boot order will change every time a drive changed and you have to set it back to boot from the DOM again from bios. There's little to no difference from using USB flash drive for the boot loader. Link to comment Share on other sites More sharing options...
sbv3000 Posted February 12, 2016 Share #5 Posted February 12, 2016 thats true, and working with USB is 'easier' Link to comment Share on other sites More sharing options...
holybabel Posted February 12, 2016 Author Share #6 Posted February 12, 2016 @sbv3000: When i flash the DOM with the xpe image then it loads from the dom without problems. My problem is when i start xpenology with a usb stick i can't access the dom because the system doesn't see. @pastrychef: The only "advantage" is that DSM boots much faster with the DOM. Link to comment Share on other sites More sharing options...
pastrychef Posted February 12, 2016 Share #7 Posted February 12, 2016 There is really no noticeable difference between booting with a USB flash drive and the DOM. The boot loader is so small it loads really fast no matter which interface is used. Link to comment Share on other sites More sharing options...
Recommended Posts