akaz
-
Posts
6 -
Joined
-
Last visited
Posts posted by akaz
-
-
Hi Stanza, excellent work. thats exactly what i thought may happen.
My setup has a H200 Raid card connected to a Suppermicro 12 Bay case..
i had to use your hack to get the last 2 drives detected as Disk 1 was being used by ESXi and Disk 2 is just missing. so my drives start from disk 3 onwards..
what would be great is if Trantor can accommodate the changes into his build that way the drives will always show up and not break the raid.
Thanks
-
Hi Stanza, what happens if you decide to upgrade to a newer version... i presume all the changes you made to synoinfo will revert back and cause the system to not see all the drives again... will this break any SHR raid ~?
i have my system setup but afraid that it will break when it comes to upgrading to a latest version of xpenology. is there a way to upgrade while keeping the changes in place?
Cheers
-
Hi Trantor i have installed beta 6 on my system under ESXi 5.5..
I have my Dell Perc 200H set-up through pass-through to a Vm Client. all drives are detected but i am noticing that the internal transfers are slow.
copied 48GB from one volume to another and noticed that the transfer was rather slow.
I have attached the drive utilization which seems to be max'd out on Volume 1 which is a SHR raid compromised of 2 x 2TB Sata disks and 1 x 3TB Sata disk. write speed of 66MB seems very slow?
what do you make of this? is the normal?
Thanks
-
Hi i changed the mac and Serial by editing the file that resides on the USB...
File is located under boot\grub\grub.conf
this is what mine looks like
#serial --unit=0 --speed=115200
#terminal serial
default 1
timeout 4
hiddenmenu
fallback 0
title SYNOLOGY_1
root (hd0,0)
hw_model
kernel /zImage root=/dev/md0 ihd_num=5 netif_num=1 syno_hw_version=RS3612xs
initrd /rd.gz
title SYNOLOGY_2
root (hd0,1)
# cksum /grub_cksum.syno
# vender /vender
# hw_model
kernel /zImage root=/dev/md0 ihd_num=5 netif_num=1 syno_hw_version=RS3612xs mac1=00113205V7U8 sn=B7J4N00000
initrd /rd.gz
All you need to do is add the MAC and Serial number.. please note the mac address format.. 00-11-32-05-C8-7B will not work.
to edit the file on windows i used notepad++ which is free to download.
-
Hi. in have xpenology installed on my HP N54L works great... other than Folder Sync.
i have another DS210J which i have set up to be the destination.. the first sync worked fine however no matter what schedule i set it on it does not kick of it self.
initially i had it on file modification that didn't work so i changed it to every 30 mins.. which does not seem to run... if i run it manually it works fine..
any ides whats going on?
thanks
Xpenology and SAS Controller - HBA
in DSM 5.2 and earlier (Legacy)
Posted
I think when 2 disks are missing the raid is stopped.. so no changes are made.. where as 1 drive missing would just look like a drive failure so the raid carries on working.
so when you add the 2 disks back the raid is automatically turned back on?? or am i wrong,.