Synssins

The fix for the Can't Format is to install the LSI Logic Parallel SCSI controller and mount your first data storage drive to that controller. I am now up and running.

The very first post at the beginning of this thread explicitly states that you need a second SATA controller. I have found this to be true, as adding a drive to the primary SATA controller results in the system not seeing the drive at all. I used the most recent 3617xs OVA supplied on Page 5, got a successful boot of the system, and it sees the drive I added to the second controller, but it fails to format. The OVA instructions did not specify the second controller, but I find having the disk attached to the original control does not resolve the issue. See the below screenshots. When I add the drive to the second controller, it is detected, but it can not be formatted. Some extra info: I live and breath VMWare. It's a key part of my career. Primary/Secondary controller should not matter. The issues with primary/secondary are purely related to the bootloader in use. If I manually deploy the 3615xs build, I'm able to make it work with the two controller method, but not the single controller method.

I also get the Cannot format disk on VMWare. My configuration has two SATA controllers with my hard disk on the second controller at 1:0. First disk is 0:0 on the first controller.