beppescuba
-
Posts
24 -
Joined
-
Last visited
Posts posted by beppescuba
-
-
On 12/6/2017 at 3:01 PM, giapas said:
Qualche anima pia...........
per caso hai incontrato l'anima pia??? Sarei molto interessato a questa cosa non tanto per le licenze, ne ho già acquistate 8, ma perchè dopo l'aggiornamento alla versione 1.02b non riesco più ad aggiungerle, quando cerca di autenticarle mi dice "Connessione non riuscita".
-
Hello, I can not add licenses to enable cameras. The system says "Connection failed. Check network settings" thank youBeppe
-
1
-
-
Polanskiman wrote:
Not sure what you mean about google translate. I wrote in English.
I would recommend you use loader v1.02a for DS3615xs. If you really want to use DS3617xs then use v1.02a2. It's clarified in the OP.
I've seen you've written in English, but I'm not familiar with English
-
My personal recommendation would be not to go beyond 6.0.2 (update 11) or even 6.1 (update 2) which should be fine in principle as many people seem to have been using 6.1 for close to two months now.
Thank you for the reply.
So if I understand the translation of "google translate", the most recent and stable version you suggest is version 6.1, which corresponds to the DS3617xs 6.1 Jun's Mod V1.02-alpha.zip file, is it correct?
Thanks again for the help.
-
Don't be surprised if you have dysfunctional features or issues. The loader is not optimised for 6.1.1 although it seems to be working on baremetal machines. VMs seem to be the ones which are affected with the inability to update 6.1 to 6.1.1
Ciao Polanskiman,
Sorry but I'm confused
, what is the last stable version to install with esxi.Thank you
-
ok , thanks for the information.
You know which network card pci-e It is compatible
all intel, realtek 10/100/100 are supported.
Thank
-
ok , thanks for the information.
You know which network card pci-e It is compatible
-
logical,
when I said that my brain was on stand bay
-
I 've tried but it does not work because if you open the file : XPEnoboot_DS3615xs_5.2-5592.2.img find some files in between which there is zImage , which I think is the kernel , which I could not open in any way .
Perhaps the firmware must be inserted in the file DSM_DS3615xs_5592.pat .
-
help !! How can I put the firmware in "/ lib / firmware / bnx2 / " if I do not have network access to the server ?
The promt does not respond to the keyboard
-
Thank you very much for the help .
I mounted the image XPEnoboot_DS3615xs_5.2-5592.2.img and inside I found these files :
libutil.c32
menu.c32
syslinux.cfg
zImage .
I suppose that there is zImage " / lib / firmware / bnx2 / " but I can not open zImage .
Thank you again
-
I do not have another network card pci -e to do the test .
5709 network cards worked when XPEnoboot was installed as a virtual machine esxi
-
Hi Trantor,
NICs my dell poweredge r710 server seems not work with the bnx2 driver . What can I do?
thanks
beppe
-
Ciao Benoire,
thanks for asking.
The solution of virtualization is one I have used so far and is good advice, but now I want to switch to native installation .
It found that the problem is the network card will try to post in the " Drivers requests"
-
I do not know linux , but I understand that the system is not able to run the network card driver bnx2. Perhaps because it is not on the USB drive.
How do I know if this driver is available .
-
I might see if this occurs on one of my R410s as I am interested in using Xpenology on a used Dell R510 12 bay unit...
If you can do this test would be very useful to see if the hardware is compatible with xpenology
-
-
I would install XPEnoboot, in a PowerEdge R710 with boot from USB, but I get errors that are not capable of understanding.
I include photos of the boot.
thanks
Beppe
-
Ciao a tutti,
vorrei sapere cosa fanno gli utenti ad esempio quali funzioni utilizzano della surveilance station (registrazioni piuttosto che veduta dal vivo) oppure se aprono una cartella è visualizzano un file.
Secondo voi è possibile?
ciao
-
Hello gnoboot ,
I think that your work is the easiest to install and most updated.
If I lived in Italy I would offer you a dinner, but they do not live nearby, I would like to make a donation.
How can I do?
hello
Beppescuba
-
you can write me in private?
thanks
-
Details are also included about creating RDM VMDK disk images instead of VMFS based virtual disks.
Hello Tuatara,
thanks for your guide.
I try to install dsm following your recommendations, but before you start the job, I would like to know if my hardware is compatible with your guide:
Dell Power Edge R710
cpu xeon 5550 x 2
32 gb ram
perc 6i
hd 6 x 2 TB sas raid 5
sd slot for future installation of embedded esxi
8 x Broadcom Nextreme II 5709.
I can follow step by step instructions, including "RDM VMDK Disk File Preparation"?
many thanks
for your help.
Beppe
-
Hello,
thanks for your guidance.
I try to install dsm following your recommendations, but before you start the job, I would like to know if my hardware is compatible with your guide:
Dell Power Edge R710
cpu xeon 5550 x 2
32 gb ram
perc 6i
hd 6 x 2 TB sas raid 5
sd slot for future installation of embedded esxi
8 x Broadcom Nextreme II 5709.
I can follow step by step instructions, including "RDM VMDK Disk File Preparation"?
many thanks
for your help.
Beppe
surveillance station 8
in ITALIAN
Posted
Sono passato ad un sistema di dvr proprietario delle telecamere perchè dall'ultimo aggiornamento che ho fatto non sono più riuscito ad inserire i seriali. Se interessa ho 2 seriali da 4 telecamere ovviamente originali ma che è possibile utilizzare solo su synology "veri"