alantang
-
Posts
17 -
Joined
-
Last visited
Posts posted by alantang
-
-
Is refer to this one?
e.g. for use DS918+ should use "./rploader.sh build apollolake-7.1.0-42661"
Correct?
Thanks!
-
4 hours ago, rojoone2 said:
Yeah.. kinda over looked his build command!😂
For the DS3615xs it should be:
1.) ./rploader.sh clean
2.) ./rploader.sh update
3.) ./rploader.sh fullupgrade
4.) ./rploader.sh identifyusb
5.) ./rploader.sh serialgen DS3615xs realmac
6.) ./rploader.sh build bromolow-7.1.0-42661
7.) exitcheck.sh reboot
For the DS3622xs+
1.) ./rploader.sh clean
2.) ./rploader.sh update
3.) ./rploader.sh fullupgrade
4.) ./rploader.sh identifyusb
5.) ./rploader.sh serialgen DS3622xs+ realmac
6.) ./rploader.sh build broadwellnk-7.1.0-42661
7.) exitcheck.sh reboot
For the DS920+:
1.) ./rploader.sh clean
2.) ./rploader.sh update
3.) ./rploader.sh fullupgrade
4.) ./rploader.sh identifyusb
5.) ./rploader.sh serialgen DS920+ realmac
6.) ./rploader.sh build geminilake-7.1.0-42661
7.) exitcheck.sh reboot
Thanks all! I think that is the point of why always show DS920+. I just new in using tinycore redpill loader. May I know how can I found those information regarding to which model using the specific build?
I will try it on tonight to test again!
*PS: I just a new USB STick to perform a new build!
-
Hello:
No matter whay model I choose it always use DS920+?
I have try DS3615xs & DS3622xs+ but it also show DS920+
Did I have somthing missed?
Below is the command that I use.
1.) After login tc with password, it show "tc@box:~$" at command prompt
2.) ./rploader.sh update
3.) ./rploader.sh fullupgrade
4.) ./rploader.sh identifyusb
5.) ./rploader.sh serialgen DS3615xs realmac
6.) ./rploader.sh build geminilake-7.1.0-42661
7.) exitcheck.sh reboot
I answer "y" when it prompt on each items
after reboot, it show the model is DS920+ in the Synology Assistant
-
Upgraded with my DS3615xs on INTEL Core i3-4130 with successful. Only not work on Quickconnect!
-
I have try to fresh install 5.2-5967 but also cannot register setup with Quickconnect. >_
-
Good, let me try!
May I know you can register quickconnect on 5.2-5967 or originally work then upgrade to 5.2-5967?
It is because I use 5.2-5644.5 before with working fine. Then I try to clean install 5.2-5644.5 again but cannot register again!
-
I have replace my HD already but it also can't register Quickconnect!
-
SO, what's problem with me? Anything I can try to solve?
Thanks!
-
I have perform the fresh install by using the same Hardware with same Serial Number and MAC Address.
I have enable DHCP from my TP-Link TL-WDR3600 router with LAN Cable connected. I have reserve the IP to this NAS.
I have put the NAS's IP into DMZ.
I have register the Dynamic DNS by no-ip.com. The registered domain is XXXX-XXXXX.no-ip.org with successful added into the "External Access" with successful login with status as "Normal".
Do I need to enable something to perform the QuickConnect setup? For Example, enable guess, install some package....etc
Thanks!
-
I use no-ip.org. Is that a problem?
I use the same DNS before I fresh re-install. Before was work!
-
Any step recommend?
I didn't enable the firewall.
I have successful register the DDNS from no-ip.com.
I use the same serial number that original register!
I didn't change the MAC address! (It was use before to make the Quick Connect work)
Any suggestion?
Thanks!
-
I have try to login but I got this error. I have verify my user email and password was correct!
Any idea?
-
Originally, my quickconnect was still work on last week!
I have perform fresh re-install my NAS but I have problem to setup the quickconnect. It is Synology Problem or any?
Thanks!
-
Ohh, I see!
-
I use Asrock Q1900-ITX! I got the problem regarding to the boot-up. I have install the DSM 5.1 Update 5 on the drive but it can't self boot-up. It need to use USB with "XPEnoboot 5.1-5022.3 IMG File"for boot-up. After use this USB, it can read the DSM that install on the Hard Drive and function normally.
May I know how can I use the internal disk to perform boot-up with DSM?
*PS: The DSM was installed on one of the drive that connected on the SATA-II port! (On Motherboard)
Thanks!
-
I also use Q1900-ITX but I got the problem regarding to the boot-up. I have install the DSM 5.1 Update 5 on the drive but it can't self boot-up. If I use the USB with "XPEnoboot 5.1-5022.3 IMG File", then it can function normally.
May I know how can I use the internal disk to perform boot-up with DSM?
*PS: The DSM was installed on one of the drive that connected on the SATA-II port! (On Motherboard)
Thanks!
Seeking help on model installation, it always be DS920+
in Answered Questions
Posted
Thanks for all to guide me solving this issue!😁