alantang
Member-
Posts
17 -
Joined
-
Last visited
Everything posted by alantang
-
Seeking help on model installation, it always be DS920+
alantang replied to alantang's question in Answered Questions
Thanks for all to guide me solving this issue!😁 -
Seeking help on model installation, it always be DS920+
alantang replied to alantang's question in Answered Questions
Is refer to this one? e.g. for use DS918+ should use "./rploader.sh build apollolake-7.1.0-42661" Correct? Thanks! -
Seeking help on model installation, it always be DS920+
alantang replied to alantang's question in Answered Questions
Thanks all! I think that is the point of why always show DS920+. I just new in using tinycore redpill loader. May I know how can I found those information regarding to which model using the specific build? I will try it on tonight to test again! *PS: I just a new USB STick to perform a new build! -
Seeking help on model installation, it always be DS920+
alantang posted a question in Answered Questions
Hello: No matter whay model I choose it always use DS920+? I have try DS3615xs & DS3622xs+ but it also show DS920+ Did I have somthing missed? Below is the command that I use. 1.) After login tc with password, it show "tc@box:~$" at command prompt 2.) ./rploader.sh update 3.) ./rploader.sh fullupgrade 4.) ./rploader.sh identifyusb 5.) ./rploader.sh serialgen DS3615xs realmac 6.) ./rploader.sh build geminilake-7.1.0-42661 7.) exitcheck.sh reboot I answer "y" when it prompt on each items after reboot, it show the model is DS920+ in the Synology Assistant -
I have try to fresh install 5.2-5967 but also cannot register setup with Quickconnect. >_
-
Good, let me try! May I know you can register quickconnect on 5.2-5967 or originally work then upgrade to 5.2-5967? It is because I use 5.2-5644.5 before with working fine. Then I try to clean install 5.2-5644.5 again but cannot register again!
-
I have replace my HD already but it also can't register Quickconnect!
-
SO, what's problem with me? Anything I can try to solve? Thanks!
-
I have perform the fresh install by using the same Hardware with same Serial Number and MAC Address. I have enable DHCP from my TP-Link TL-WDR3600 router with LAN Cable connected. I have reserve the IP to this NAS. I have put the NAS's IP into DMZ. I have register the Dynamic DNS by no-ip.com. The registered domain is XXXX-XXXXX.no-ip.org with successful added into the "External Access" with successful login with status as "Normal". Do I need to enable something to perform the QuickConnect setup? For Example, enable guess, install some package....etc Thanks!
-
I use no-ip.org. Is that a problem? I use the same DNS before I fresh re-install. Before was work!
-
Any step recommend? I didn't enable the firewall. I have successful register the DDNS from no-ip.com. I use the same serial number that original register! I didn't change the MAC address! (It was use before to make the Quick Connect work) Any suggestion? Thanks!
-
I have try to login but I got this error. I have verify my user email and password was correct! Any idea?
-
Originally, my quickconnect was still work on last week! I have perform fresh re-install my NAS but I have problem to setup the quickconnect. It is Synology Problem or any? Thanks!
-
Ohh, I see!
-
I use Asrock Q1900-ITX! I got the problem regarding to the boot-up. I have install the DSM 5.1 Update 5 on the drive but it can't self boot-up. It need to use USB with "XPEnoboot 5.1-5022.3 IMG File"for boot-up. After use this USB, it can read the DSM that install on the Hard Drive and function normally. May I know how can I use the internal disk to perform boot-up with DSM? *PS: The DSM was installed on one of the drive that connected on the SATA-II port! (On Motherboard) Thanks!
-
I also use Q1900-ITX but I got the problem regarding to the boot-up. I have install the DSM 5.1 Update 5 on the drive but it can't self boot-up. If I use the USB with "XPEnoboot 5.1-5022.3 IMG File", then it can function normally. May I know how can I use the internal disk to perform boot-up with DSM? *PS: The DSM was installed on one of the drive that connected on the SATA-II port! (On Motherboard) Thanks!