de.hessi.james
-
Posts
10 -
Joined
-
Last visited
Posts posted by de.hessi.james
-
-
On 11/28/2019 at 8:34 AM, flyride said:
Download 6.2.1, install and follow the real3x procedure. It's not just replacing extra.lzma, but you have to run the scripted commands that cause the i915 driver to be disabled.
Then update to latest version.
Hi flyride,
it tested the procedure. Installing DSM_DS918+_23824 was no problem. The internal NIC works with that version.
After that, I copied the extra.lzma with WinSCP to /volume1/extra.lzma and did the following commands:
echo 1 > /proc/sys/kernel/syno_install_flag mkdir -p /mnt/synoboot1 mkdir -p /mnt/synoboot2 mount /dev/synoboot1 /mnt/synoboot1 mount /dev/synoboot2 /mnt/synoboot2 cd /mnt/synoboot2 rm extra2.lzma cp /volume1/extra.lzma extra.lzma rm -rf /usr/lib/modules/update/* rm /volume1/extra.lzma
After that I rebooted the system. But now the system is not reachable again.
-
11 hours ago, flyride said:
Look up real3x mod should fix your problem.
You talk about that post, right?
I allready tried that. But as I have no network connection, I can't connect to the console, right? Or is there an other way to open the shell?
I tried to replace the extra.lzma in partition 1 of the img-file with OSFMount, but that didn't change anything. Was the procedure right?
Perhaps I did something wrong and have to try it again.
Thanks for your help!
Regards
hessi
-
On 3/4/2019 at 1:26 PM, bearcat said:
One of my systems is an AsRock Q1900-ITX, with Jun's 1.04 and the 918+, running all OK, but it was installed on a clean system, not updated from 5.x
Hi bearcat,
I`m unsing a ASRock Q1900DC-ITX and try to install DSM 6.2.2-24922 Update 4 with JUN'S LOADER v1.04b on a clean system.
My problem is, that the network card doesn't work after the DSM installation. Do you use the internal network card in your configuration or an external PCIe Card?
If your are using an external NIC it would be interesting to know the type of the card.
Best regards
hessi
-
1 hour ago, bglf83 said:
I am not sure how safe the currently working cards are, however I believe 6.2 will receive 2 years of security updates after 7.0 comes out.Ok, is there a list of working nics for v1.04b? Didn't find one yet.
Some postings say, that Intel 9301CT Gigabit CT Desktop BLK (EXPI9301CTBLK) should work.
-
Hi,
I'm planning to upgrade my ASRock Q1900DC-ITX from DSM 6.1 to DSM 6.2.
In some test I recognized that the interal network card is not recognized by the latest Version of DSM 6.2
I added a Intel 82576 network card, but that works only with Loader v1.03b.
Now my question:
Will v1.03b be supported in future and is there a recomended network card for v1.04b (PCIe 2.0 x1)?
The thing is that if I buy a new networkiadapter, it shoud be compatible to the next loader an DSM Versions.
Thanks for your help!
-
Hi guys,
here is my final solution:
-Downgrading with hongong3 tutorial.
-Install DSM 5.1-5022 Update 5 with the online Update:
Control Panel / Update & Restore / [update Settings] checked "Important update only"
-Restart DSM
-Then clearing the SMB cache:
Control Panel / File Services / [Advanced Settings] (button on Windows File Service section) / [Clear SMB cache] / [Apply]
-Restart Windows File Service
unchecked Control Panel / File Services / "Enable Windows file serivce"
checked Control Panel / File Services / "Enable Windows file serivce"
-Restart DSM
Now everything works perfectly
Thanks to hongong3 and d3vk1dd
-
Cant seem to get the SMB started, have tried to restart the service. I also tried shutting down the service, rebooting ds, starting and rebooting again, anyone has any idea?
Thx helped me out alot with the guide.
I have the same Problem.
/usr/syno/etc/rc.sysv/S80samba.sh restart doesn't help, too
Syslog says:
May 14 00:30:14 DiskStation kernel: [ 567.227408] init: smbd main process (19794) terminated with status 1
May 14 00:30:14 DiskStation kernel: [ 567.227491] init: smbd main process ended, respawning
May 14 00:30:15 DiskStation kernel: [ 568.031892] init: smbd main process (19840) terminated with status 1
May 14 00:30:15 DiskStation kernel: [ 568.032005] init: smbd main process ended, respawning
May 14 00:30:16 DiskStation kernel: [ 568.845379] init: smbd main process (19886) terminated with status 1
May 14 00:30:16 DiskStation kernel: [ 568.845469] init: smbd main process ended, respawning
May 14 00:30:17 DiskStation kernel: [ 569.669708] init: smbd main process (19932) terminated with status 1
May 14 00:30:17 DiskStation kernel: [ 569.669788] init: smbd main process ended, respawning
May 14 00:30:18 DiskStation kernel: [ 570.494513] init: smbd main process (19978) terminated with status 1
May 14 00:30:18 DiskStation kernel: [ 570.494599] init: smbd main process ended, respawning
May 14 00:30:18 DiskStation kernel: [ 571.251985] init: smbd main process (20028) terminated with status 1
May 14 00:30:18 DiskStation kernel: [ 571.252063] init: smbd respawning too fast, stopped
-
Seems that it hast installed 5.2-5565.
Downgrade worked.
-
Hi!
I have installed Update auf DSM 5.1-5022 Update 5 on my XPEnology.
After the update I get the following Error on the Website:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, admin and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
SSH and CIFS works.
Any Idea?
Failed upgrade DSM 6.2.2-24922 on Asrock Q1900DC-ITX
in DSM 6.x
Posted
I have the same question:
Does DSM 6.2.2-24922 works with Jun v1.04b - DS918 on Asrock q1900dc-itx and Intel EXPI9301CT?