holybabel
-
Posts
171 -
Joined
-
Last visited
Posts posted by holybabel
-
-
Naja, theoretisch alle die auch Synology unterstützt:
-
Funktioniert aber nur bis DSM 5.1
-
Hast du eventuell auf deinem Rechner eine Firewall laufen bei der der Port geblockt wird?
-
You will find the answer in this thread: viewtopic.php?f=2&t=6137
-
Which xpenoboot version do you use and to which 5.2 version did you upgrade?
The message in the boot log you describe is normal.
-
Sorry, hab das wohl nicht genau genug gelesen. Bei 4 Platten wird eine komplett als Ausfallsicherheit genommen.
-
Vermutlich hast du ein SHR Volume angelegt,d.h. du hast ein RAID. Dadurch stehen dir nur 2/3 der Kapazität zur Verfügung, da das restliche Drittel als Ausfallsicherheit dient. Wenn eine Platte ausfällt steckst du einfach eine neue rein und hast nach einer gewissen Zeit wieder Zugriff auf alle Daten. Das System installiert sich immer auf alle Platten in Volume1.
-
Dann versuchst du wahrscheinlich auf die letzte Version 5.2-5592 upzudaten. Die Version funktioniert derzeit noch nicht. Lediglich die 5.2-5565 Update 2 geht derzeit.
-
-
Anleitungen findest du z. B. unter http://xpenology.me
-
Bei mir kann ich das in meinem Router (FritzBox) einstellen.
Da mein Raspberry aber 24/7 läuft habe ich das wieder ausgemacht, da sonst das NAS ständig laufen würde, bzw. nach dem Shutdown sofort wieder starten würde.
-
Such mal nach cfgportmod hier im Forum. Da gibt es einiges an Infos zu dem Thema. Du musst wahrscheinlich ein paar Dateien anpassen.
-
The first code is correct:
dd if=xpenology-latest.img of=/dev/sdg
Here you can find a short tutorial:
-
Did you use the update/install within the bootloader?
-
Which boot loader do you use? Seem's that you don't have updated your bootloader to 5.2-5565.2
-
thx thordrid and cartman, now it works again
-
You can go directly to 5.2
You should save your configuration so you can restore them if your configuration is lost.
-
Thx, now it works when the disk is attached at startup, no hotplug. Do i have to change something in bios?
-
Ich denke mal der USB-Stick ist folgender:
/dev/sdu1 on /volumeUSB1/usbshare type vfat (utf8,umask=000,shortname=mixed,uid=1024,gid=100,quiet)
Daher müsstest du glaube ich ein "umount /volumeUSB1/usbshare" machen.
-
Hi everyone,
i have a Intel SS4200-E with 4 internal SATA ports, 2 eSATA ports and 4 USB ports. The 4 internal sata-ports show up as disk 1-4, the esata ports show up as 5-6, the USB ports show up as external devices.
Now i want the esataports to use as external device and not as internal device.
I tried following config:
internalportcfg="0xf"
esataportcfg="0x30"
usbportcfg="0xf00000" (standard value)
maxdisks="12" (standard value)
But when i try this config the drives attached to the esata ports don't show up in DSM. They don't show up in the device manager nor the external devices. Can you give me a hint what i am doing wrong?
Greetings holybabel
-
Now i upgraded to 5.1-5055.1
But the update to 5.2 still doesn't work. Xpenoboot (5.2-5565.1 or 5.2-5565.2) always stops at a random point and makes a restart
EDIT: Ok, found the problem. My graphics card seems to make problems. When i start the server without graphics card attached XPEnoboot 5.2 works without problems
EDIT2: Very strange, after installation the graphic card works again. Now i have working 5.2-5565.2 with graphic card
-
Hm, don't know what you mean. What older image do i need?
-
I already tried without mouse. I tried all 3 options (normal, debug, upgrade/migrate) but everytime the boot proccess stops at a random point and the server makes a restart.
-
Hi everyone,
i try to upgrade from DSM 5.1-5022 Update 5 (Xpenoboot 5.1-5022.3) to DSM 5.2-5565 (Xpenoboot 5.2-5565.2), but everything i try, the boot image doesn't work. The boot process stops at random points and then my Intel SS-4200 makes a reboot. One time it got to the diskstation login but when i tried to make the update through the assistant the web page opens, but nothing happens. I already tried a new usb-stick and write the image again with win32diskimager, but everytime the same result. I downloaded the boot image several times. Tried to boot without usb keyboard an mouse.
Is there a way to log the boot process so i can see where the problem is?
What can i do?
Greetings holybabel
holybabel
DSM 5.2 is available
in Readers News & Rumours
Posted
You must edit the "DEFAULT" value in syslinux.cfg.
From
To
Now the install option is marked as default value.
You can change the timeout value too, so it boot's a little faster:
From
To