[From FreeNAS to Xpenology]

Hi to all forum ,

I have a microserver gen8 and I am using freenas on it, but I am not familiar with the os and I like to go on a xpenology os. I haved used in various of home PC's with xpenology since the first release. Now days I have one brix gigabyte at home with 6.0.2 on it, from jun's hack. All are ok, I use it since the first day of release. I have only one disk for data and of course the USB for booting. On microserver I have 1 SSD and 2 hdd 2 TB for data on Raid 1. Data are very important cause it's a civil engineer office. Can anyone help me to setup the microserver and reset all the permissions from freenas. I will of course backup all the data to a usb hdd just in case.... 

 

Thanks

[DSM 6.1.x Loader]

18 hours ago, Polanskiman said:

 

Yes, you should be able to. But in the future please use proper code tags when posting.

 

 

Thanks you Rock and sorry next time i will be prepared  

[DSM 6.1.x Loader]

I am on a working ds315x dsm 6.0.2-8451 update 8 (9 and up broke my eth0 ) since 2017/1/6 all are great,

except now I have a file system error once every boot, (reboot or ignore with reboot nothing happens again the message the health of disk is good and the smart too)

 

I want to update to the latest and I don't use any special driver or mod to the first loader and my card is:

nikkpap@TinyLittleNAS:~$ dmesg | grep "eth"
[    7.389373] usbcore: registered new interface driver ethub
[   27.604012] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   29.347310] eth0: 0xffffc90011d90000, 00:11:32:2c:a7:85, IRQ 104
[   29.414090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.436027] r8168: eth0: link up
[   32.436073] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nikkpap@TinyLittleNAS:~$ 

Can I update the usb first correct the vid and pid and serial and then update DSM with the latest pat ? or i missing something else?

 

Thanks

 

ps: i am on this machine https://www.gigabyte.com/Mini-PcBarebone/GB-BXBT-2807-rev-10#sp

Ethernet Controller(s)

Realtek RTL8111G

[DSM 6.1.x Loader]

does anyone can share the DSM_DS3615xs_8451.Update8.pat or DSM_DS3615xs_8451.Update6.pat update

and do not install DSM_DS3615xs_8451.Update9.pat it will kill your network card and you have to reinstall it

nice try synology

thanks

[DSM 6.1.x Loader]

Hi i want to ask you, after a succesfull installation of v6.0.2 to "Brix n2807" (before with XPEnoboot 5.2-5544.5 i had no problem at all for mounths) my disk on is recognized and on storage manager i get the full capacity of the disk and initialized but when i try to create a volume i get the message

"There is no RAID Group in your system, please go to RAID Group tab to create a new RAID Group first." idont have raid controler noither with XPEnoboot 5.2-5544.5 did anything further.

 

Please guide me

 

 

PS Can anyone tell me a way to clone the working system of XPEnoboot 5.2-5544.5 to a bigger HDD with no data loss.

 

Thanks in Advance

Nick

nikkpap@gmail.com

[gigabite ethernet lan chipset suppoting dms 5.0+???]

RTL8169SC is this chipset for gigabite lan suppoting by dms 5.0 and over???