Tobias2k

Yesterday I set up an older HP 800 G2 system (i5-6500, 8GB Ram, 280w 80+ platinum PSU) as an replacement for my previous terramaster F4-220 system. I decided to go with the dva3221 modell using the latest ARPL and Firmware. Everything works fine so far but heat and power consumption got my attention. As far as I can see the CPU is even at 1% load running at turbo frequency. cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq 3578198 3491074 3471251 3453339 grep . /sys/devices/system/cpu/cpu0/cpufreq/* /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0 /sys/devices/system/cpu/cpu0/cpufreq/bios_limit:3201000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:3201000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:3201000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency:10000 /sys/devices/system/cpu/cpu0/cpufreq/freqdomain_cpus:0 1 2 3 /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0 /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies:3201000 3200000 3000000 2900000 2700000 2500000 2300000 2200000 2000000 1800000 1700000 1500000 1300000 1100000 1000000 800000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:powersave performance userspace /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:3475888 /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:3201000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupported> grep: /sys/devices/system/cpu/cpu0/cpufreq/stats: Is a directory cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance Any idea how this can be changed?

Hi folks, I've upgraded my Terramaster F4-220 (J1800 Dual-Core Soc, 4GB Ram) from DSM 6.2 to 7.1 last weekend, which worked out so far. Unfortunately the system gets incredible slow as soon as you start a simple task. For example I just activated one camera in surveillance station and the whole system is unreachable since 10 minutes. I recognized this behavior right after installation. I thought the system needs some time to index the files so I gave the nas a day to work. The tasks seemed to be completed because the CPU load was only a few percent this morning. But the behavior with activating one camera tells me that something isn't right with the DSM. Under DSM 6 I had 3 cameras, jdownloader and a docker virtual machine running without any issues.

Hallo zusammen, ich nutze seit etwa 2 Jahren Xpenology auf einem Terramaster F4-220 NAS (J1800 CPU) mit insgesamt 4GB Ram (2GB davon nachgerüstet). Da VMs doch etwas mehr RAM ziehen, habe ich einen 4GB DDR3L Stick gekauft und eingebaut. Im Bios wird der RAM Riegel auch korrekt erkannt, allerdings bootet weder das bisherige DSM 6.x noch der Red Pill loader damit. Letzterer bleibt beim Booten einfach stehen (siehe Foto). Hat jemand vielleicht eine Idee, woran es liegen könnte und noch besser, wie das Problem gelöst wird?