[TinyCore RedPill Loader (TCRP)]

I using a m-shell and have DVA3221 working with a Quadro P2000, transcoding is working fine,

 

currently on update 1,

 

can I update to update 4 manually?

 

[Automated RedPill Loader (ARPL)]

Does the DVA3221 build takes advantage of the NVIDIA GPU (if installed) when using PLEX?

 

NVM it seems it does work, thanks!

[Automated RedPill Loader (ARPL)]

On 11/4/2022 at 3:58 AM, nemesis122 said:

Hi I had the same issue go in the loader menu to update and update the addons and modules and build the loader again it will work 

That did the trick thanks

[Automated RedPill Loader (ARPL)]

3 hours ago, gjanssen said:

Hi, just a question, how did you get all 18 drives recognized? I have 12 in mine and put the max disk to 12 but only see 8. I'm running the 3622xs  and have 6Sata on my motherboard, another Asmedia card with 6 ports and 2 NVME SSD's, on the ASmedia i'm only using 4 ports btw.

I edited cmdline SataPortMap 6488 the DiskIdxMap 050800 (you can play around with the diskidxmap to align the disk perfectly but i dont care about it, all disks are recognized)

[Automated RedPill Loader (ARPL)]

EPC621D8A mobo with Intel X540-T2 , unable to load latest ARPL with 10GB nic, gives error getting IP after building and booting

 

embedded NICs worked, recognized all 18 drives

 

Would like to get 10GB NICs working ,  any suggestions?

 

FYI with Alpha build the NIC X540-T2 gets recognized no issues other than it keeps crashing the volume after reboots, bare metal setup

 

[Automated RedPill Loader (ARPL)]

I have the same issue with an Intel X540-T2   10gb nic, it used to work until beta came out.

Now if it's installed neither beta works, when I remove it and use the onboard 1gb card the beta loads and works ok

 

with the 10gb after it boots it shows "ERROR" in red next to IP

[Automated RedPill Loader (ARPL)]

Hi all,

 

I have the following setup, motherboard has two onboard controllers

 

regular sata 6

SAS 3  4

 

Then I have two SAS3 controller, each has 8 ports

so 8,8

 

here is what my SataPortMap  will be -----  6488

here is what my DiskIdxMap    will be -----  050800

 

All ports will have a drive, is this correct?

 

Thanks