Jump to content
XPEnology Community

sebigeli

Transition Member
 View Profile  See their activity

  • Posts

    10

  • Joined

  • Last visited

 Content Type 

Posts posted by sebigeli

    i915.ko backported driver for intel 10th gen (DS918+ ver 7.0.1 up3)

    in Developer Discussion Room

    Posted

    Just now, Orphée said:

    If you really need to have a Windows VM with an iGPU and you know Proxmox...

    Don't bother with VMM...

     

    https://community.synology.com/enu/forum/1/post/135055

     

     

    ok, that bothers me because I already have a cluster with two proxmox hosts. I'm doing gpu passthrough for a windows vm on one and on the second it's disabled to be able to mount the gpu on an lxc Plex container, except that I want redundancy in the event of a host failure on the container part LXC, except that the GPU passthrough will no longer work on the VM... That's why, I would like to have my administration VM, 3D modeling on my 3rd host. (the “NAS”)

    i915.ko backported driver for intel 10th gen (DS918+ ver 7.0.1 up3)

    in Developer Discussion Room

    Posted · Edited by sebigeli

    4 minutes ago, Orphée said:

    Just switch to DS918+ loader... it is genuine supported with your iGPU.

    Why do you want to hack DS3622xs+ when DS918+ is working just fine as long as you know how to iGPU passthrough ?

     

    You expect to passtrough the iGPU from DSM to a Windows VM using VMM from Synology ?

    I don't know if VMM is able to do it.

    Oh ok, the DS918+ is compatible to mount a storage from usb HDD ? support nvme disk as internal storage ? 

     

    Arf... if VMM is not compatible, I will go to proxmox with DSM VM but I prefer with a DSM on a baremetal... the gpu passthrough is only for container ? 

    i915.ko backported driver for intel 10th gen (DS918+ ver 7.0.1 up3)

    in Developer Discussion Room

    Posted

    On 4/10/2022 at 2:18 PM, blackmanga said:

    i915 drivers for various models  and scripts. I have tested them on DS 918+ and can confirm that /dev/dri exists and HW transcoding works perfectly (even HDR tonemapping works with the linuxserver/plex docker)

     

    DS918+ DSM 7

    https://www.filehosting.org/file/details/3054890/i915.7z

    https://www104.zippyshare.com/v/oPItjx82/file.html

    https://dailyuploads.net/41tops2ix61g

     

    DS920+  DSM 7

    https://dailyuploads.net/iiafmtyxq2si

    https://www74.zippyshare.com/v/NPbJM27X/file.html

     

    DS3622+ DSM 7

    https://dailyuploads.net/avd0bpv3ejw0

    https://www100.zippyshare.com/v/i1ha0qjo/file.html

     

    Attached the scripts as well to remove original modules (rm_modules.sh) in a running DSM system, and then insert the new modules (in_modules.sh). All modules are for kernel 4.4.180+

     

     

    If someone would like to compile their own modules, you would need to patch the files in linux.4.4.x source files.

     

    The i915.patch file is to be placed in linux.4.4.x folder of the GPL source.

    (you can do a dry run to see if there are any errors first: patch -p0 --verbose --dry-run < i915.patch )

     

    If everything looks ok, you can run the following command

    patch -p0 --verbose -b < i915.patch

     

    after this, you just cross compile the modules as usual.

     

    in_modules.sh 203 B · 202 downloads rm_modules.sh 183 B · 182 downloads i915.patch 7.13 kB · 186 downloads

    Hello,

     

    I have a DS3622XS+ with DSM 7.2.1-69057 Update 3, installed with Arc Loader, It running on a mini pc with I5 7500T and I need to deploy a Windows VM with GPU passthrough. Is it possible ? When the driver are installed (if it's compatible), how to tell windows vm to use intel hd graphics 630. 

    Thanks ! 

    Change nature of disk Arc Loader

    in Hardware Modding

    Posted

    Hello,

     

    I was using an Xpenology NAS under Arc Loader on an ESXI (I5 12400 + 80 Gb of RAM) and I migrated the NAS in baremetal mode to an HP Probook G3 mini PC, I mounted my 2 old 4 TB hard drives via USB.

    The goal is to migrate everything to SSD.

    I had a Raid 1 of 2 4TB HDDs. I removed an HDD that I was thinking of replacing with a 2.5" 4TB SSD to reform the RAID except that it is not possible to mix two different types of disks hard (hdd, ssd...), is there a possibility to do this?

    I was planning to do an F1 raid with an internal 2.5" SSD, 1 nvme SSD and a 2.5" SSD connected via USB, is it possible to pass everything off as SSDs of the same type or even HDD for create a single storage pool. 

     

    Xpenology is installed with the DS918+ model

     

    Thanks

    Automated RedPill Loader (ARPL)

    in Loaders

    Posted · Edited by sebigeli

    Hello,

     

    This loader is very cool. Good job :) 

    I just have one big problem for me. The loader is installed on VM on ESXI in 7.0.3. I have installed the firmware and DSM 7.1.1 it's working fine but I can't create a snapshot on the VM so I can't do backup with VEEAM. Anyone have a fix for this ? I don't undestand why it's not working... I just select the disk 0:0 for the backup, just for save the NAS (loader, dsm...)

     

    I have try, when I create a VM and import the VDMK loader on it, without even starting the vm, we can no longer create a snapshot.

     

    It's normal, I can't boot on the loader if the VM use UEFI ?

     

    Thanks 

×
×
  • Create New...