thisisthedangtime
-
Posts
9 -
Joined
-
Last visited
Posts posted by thisisthedangtime
-
-
Thanks @flyride. Just to remove any other potential errors from the equation, I recreated the machine once again. I used all the commands above, with the addition of the mpt3sas driver:
./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json
and then also used the following command to adjust the DiskIdxMap=1000
vi user_config.json
Now it works! Seriously big thanks. I was ready to install something else, incredibly frustrating. Can you explain why the DiskIdxMap is 1000? Just looking to understand what that change does. Perhaps it can help someone else down the line understand how that string is interpreted.
-
1
-
-
It seems the error is in the installer:
It looks that you will need the following modules :
Found IDE Controller : pciid 8086d00007111 Required Extension :
No matching extension
Found VGA Controller : pciid 15add00000405 Required Extension : vmwgfx
Searching for matching extension for vmwgfx
Found SATA Controller : pciid 15add000007e0 Required Extension :
No matching extension
It looks like I just need the extension, probably mpt2sas and mpt3sas
-
I thought I did, but got a "no drives detected warning" on setup, so I started from scratch again. I actually did three times to make sure I haven't messed up. Each time has ended with it saying "no drives detected." As above, I started with these commends:
ntpd -p north-america.pool.ntp.org -q./rploader.sh update now./rploader.sh fullupgrade./rploader.sh serialgen DS3622xs+./rploader.sh satamapHere, the driver downloads but doesn't seem to initialize, so I deny the update because it doesn't see the two drives I have plugged in.
SpoilerMachine is VIRTUAL Hypervisor=VMware
Found SCSI HBAs, We need to install the SCSI modules
Downloading: scsi-5.10.3-tinycore64.tcz
Connecting to repo.tinycorelinux.net (89.22.99.37:80)
saving to 'scsi-5.10.3-tinycore64.tcz'
scsi-5.10.3-tinycore 100% |********************************| 2632k 0:00:00 ETA
'scsi-5.10.3-tinycore64.tcz' saved
scsi-5.10.3-tinycore64.tcz: OK
Succesfully installed SCSI modules
Found "02:01.0 VMware SATA AHCI controller"
Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks
Found SCSI/HBA "13:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (63 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
Computed settings:
SataPortMap=1
DiskIdxMap=10
Should i update the user_config.json with these values ? [Yy/Nn] n
OK remember to update manually by editing user_config.json file
./rploader.sh satamapI ran it again immediately afterwards now that the driver is initialized. This time, I accepted the update to user_config.json
Spoilertc@box:~$ ./rploader.sh satamap
Machine is VIRTUAL Hypervisor=VMware
Found SCSI HBAs, We need to install the SCSI modules
scsi-5.10.3-tinycore64 is already installed!
Succesfully installed SCSI modules
Found "02:01.0 VMware SATA AHCI controller"
Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks
Found SCSI/HBA "13:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (2 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (65 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
Computed settings:
SataPortMap=1
DiskIdxMap=10
Should i update the user_config.json with these values ? [Yy/Nn] y
Done.
cat user_config.jsonJust wanted to verify the configuration.
Spoiler{
"extra_cmdline": {
"pid": "0xa4a5",
"vid": "0x0525",
"sn": "redacted",
"mac1": "redacted",
"SataPortMap": "1",
"DiskIdxMap": "10"
},
"synoinfo": {
"internalportcfg": "0xffff",
"maxdisks": "16",
"support_bde_internal_10g": "no",
"support_disk_compatibility": "no",
"support_memory_compatibility": "no"
},
"ramdisk_copy": {}
}
./rploader.sh build broadwellnk-7.1.0-42661Built with the loader with broadwellnk, which this link says is the correct configuration for the DS3622xs+ we selected earlier.
Then I turned off the machine and booted into SATA, where it tells me there are no disks.
To play devils advocate, I reboot back into the image builder to verify things are correct.
./rploader.sh satamapThe drives aren't initialized again. It had to redownload "scsi-5.10.3-tinycore64." Am I missing something?
Spoilertc@box:~$ sudo su
root@box:/home/tc# date
Tue Jan 2 02:25:45 UTC 2018
root@box:/home/tc# ntpd -p north-america.pool.ntp.org -q
root@box:/home/tc# exit
tc@box:~$ ./rploader.sh update now
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Found newversion : 0.8.0.3
Current version : 0.8.0.0
There is a newer version of the script on the repo should we use that ? [yY/nN]y
OK, updating, please re-run after updating
Updating tinycore loader with latest updates
Backing up files to /mnt/sda3//mydata.tgz
Done.
tc@box:~$ ./rploader.sh fullupgrade
Performing a full TCRP upgrade
Warning some of your local files will be moved to /home/tc/old/xxxx.2022-Jun-30-04-35
Updating custom_config.json
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 33842 100 33842 0 0 72622 0 --:--:-- --:--:-- --:--:-- 72622
Updating custom_config_jun.json
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 8954 100 8954 0 0 18970 0 --:--:-- --:--:-- --:--:-- 18970
Updating global_config.json
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 5692 100 5692 0 0 12537 0 --:--:-- --:--:-- --:--:-- 12537
Updating modules.alias.3.json.gz
mv: cannot stat 'modules.alias.3.json.gz': No such file or directory
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 5591 100 5591 0 0 17581 0 --:--:-- --:--:-- --:--:-- 17581
Updating modules.alias.4.json.gz
mv: cannot stat 'modules.alias.4.json.gz': No such file or directory
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 89007 100 89007 0 0 252k 0 --:--:-- --:--:-- --:--:-- 252k
Updating rpext-index.json
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 211k 100 211k 0 0 345k 0 --:--:-- --:--:-- --:--:-- 345k
Updating user_config.json
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 431 100 431 0 0 876 0 --:--:-- --:--:-- --:--:-- 420k
Updating dtc
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 146k 100 146k 0 0 281k 0 --:--:-- --:--:-- --:--:-- 281k
Updating rploader.sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 95994 100 95994 0 0 261k 0 --:--:-- --:--:-- --:--:-- 261k
Updating ds1621p.dts
mv: cannot stat 'ds1621p.dts': No such file or directory
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 3026 100 3026 0 0 6861 0 --:--:-- --:--:-- --:--:-- 6861
Updating ds920p.dts
mv: cannot stat 'ds920p.dts': No such file or directory
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 2423 100 2423 0 0 5210 0 --:--:-- --:--:-- --:--:-- 5210
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 2.8M , try to keep it less than 1GB as it might not fit into your image
Should i update the sda with your current files [Yy/Nn]
y
Backing up home files to sda : Backing up files to /mnt/sda3//mydata.tgz
Done.
tc@box:~$ ./rploader.sh serialgen DS3622xs+
Serial Number for Model : 2150SQRFPN7EW
Mac Address for Model DS3622xs+ : 00:11:32:38:1F:3C
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ ./rploader.sh satamap
Machine is VIRTUAL Hypervisor=VMware
Found SCSI HBAs, We need to install the SCSI modules
Downloading: scsi-5.10.3-tinycore64.tcz
Connecting to repo.tinycorelinux.net (89.22.99.37:80)
saving to 'scsi-5.10.3-tinycore64.tcz'
scsi-5.10.3-tinycore 100% |********************************| 2632k 0:00:00 ETA
'scsi-5.10.3-tinycore64.tcz' saved
scsi-5.10.3-tinycore64.tcz: OK
Succesfully installed SCSI modules
Found "02:01.0 VMware SATA AHCI controller"
Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks
Found SCSI/HBA "13:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (63 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
Computed settings:
SataPortMap=1
DiskIdxMap=10
Should i update the user_config.json with these values ? [Yy/Nn] n
OK remember to update manually by editing user_config.json file
tc@box:~$ ./rploader.sh satamap
Machine is VIRTUAL Hypervisor=VMware
Found SCSI HBAs, We need to install the SCSI modules
scsi-5.10.3-tinycore64 is already installed!
Succesfully installed SCSI modules
Found "02:01.0 VMware SATA AHCI controller"
Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks
Found SCSI/HBA "13:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (2 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid bus number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (65 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
lspci: -s: Invalid slot number
Found SCSI/HBA "" (0 drives)
Computed settings:
SataPortMap=1
DiskIdxMap=10
Should i update the user_config.json with these values ? [Yy/Nn] y
Done.
tc@box:~$ cat user_config.json
{
"extra_cmdline": {
"pid": "0xa4a5",
"vid": "0x0525",
"sn": "sensored",
"mac1": "sensored",
"SataPortMap": "1",
"DiskIdxMap": "10"
},
"synoinfo": {
"internalportcfg": "0xffff",
"maxdisks": "16",
"support_bde_internal_10g": "no",
"support_disk_compatibility": "no",
"support_memory_compatibility": "no"
},
"ramdisk_copy": {}
}
tc@box:~$ ./rploader.sh build broadwellnk-7.1.0-42661
Rploader Version : 0.8.0.3
Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master
Extensions : redpill-misc
Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download
TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download
SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM : broadwellnk
TARGET_VERSION : 7.1.0
TARGET_REVISION : 42661
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 4
MODULE_ALIAS_FILE : modules.alias.4.json
SYNOMODEL : ds3622xsp_42661
MODEL : DS3622xs+
Local Cache Folder : /mnt/sda3/auxfiles
DATE Internet : 30062022 Local : 30062022
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Version is current
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1257, done.
remote: Counting objects: 100% (329/329), done.
remote: Compressing objects: 100% (44/44), done.
remote: Total 1257 (delta 306), reused 290 (delta 284), pack-reused 928
Receiving objects: 100% (1257/1257), 470.09 KiB | 3.31 MiB/s, done.
Resolving deltas: 100% (869/869), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 2042, done.
remote: Counting objects: 100% (14/14), done.
remote: Compressing objects: 100% (9/9), done.
remote: Total 2042 (delta 3), reused 12 (delta 3), pack-reused 2028
Receiving objects: 100% (2042/2042), 114.71 MiB | 15.36 MiB/s, done.
Resolving deltas: 100% (955/955), done.
No extra build option or static specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds3622xsp_42661
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwellnk.tgz
Extracting module
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/src/check-redpill.sh
Got redpill-linux-v4.4.180+.ko
Testing modules.alias.4.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :
Found IDE Controller : pciid 8086d00007111 Required Extension :
No matching extension
Found VGA Controller : pciid 15add00000405 Required Extension : vmwgfx
Searching for matching extension for vmwgfx
Found SATA Controller : pciid 15add000007e0 Required Extension :
No matching extension
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.vmxnet3 ==========================================
[#] Extension name: vmxnet3
[#] Description: Adds VMware vmxnet3 virtual NIC driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/vmxnet3
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42218 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================
Found Ethernet Interface : pciid 15add000007b0 Required Extension : vmxnet3
Searching for matching extension for vmxnet3
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/rpext-index.json"
------------------------------------------------------------------------------------------------
Starting loader creation
Found tinycore cache folder, linking to home/tc/custom-module
Checking user_config.json : Done
Entering redpill-load directory
Removing bundled exts directories
Cache directory OK
Found build request for revision greater than 42218
Getting required extraction tool
------------------------------------------------------------------
Checking tinycore cache folder
Found tinycore cache folder, linking to home/tc/custom-module
Creating temp folder /tmp/synoesp
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 345M 100 345M 0 0 41.3M 0 0:00:08 0:00:08 --:--:-- 42.6M
Entering synoesp
extract rd.gz
finish
cpio: dev/console: Cannot mknod: Operation not permitted
cpio: dev/net/tun: Cannot mknod: Operation not permitted
42506 blocks
extract rd
mkdir: cannot create directory '/mnt/sda3/auxfiles': File exists
Copying required files to local cache folder for future use
Copying usr/lib/libcurl.so.4 to /mnt/sda3/auxfiles
Copying usr/lib/libmbedcrypto.so.5 to /mnt/sda3/auxfiles
Copying usr/lib/libmbedtls.so.13 to /mnt/sda3/auxfiles
Copying usr/lib/libmbedx509.so.1 to /mnt/sda3/auxfiles
Copying usr/lib/libmsgpackc.so.2 to /mnt/sda3/auxfiles
Copying usr/lib/libsodium.so to /mnt/sda3/auxfiles
Copying usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 to /mnt/sda3/auxfiles
Copying usr/syno/bin/scemd to /mnt/sda3/auxfiles
Copying required libraries to local lib directory
Linking lib to lib64
Copying executable
Removing temp folder /tmp/synoesp
Checking if tools is accessible
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Copyright (c) 2003-2021 Synology Inc. All rights reserved.
/bin/syno_extract_system_patch PATCH_PATH DEST_PATH
Executed succesfully
Creating temp folder /tmp/pat
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Could not find pat file locally cached
Configdir : /home/tc/redpill-load/config/DS3622xs+/7.1.0-42661
Configfile: /home/tc/redpill-load/config/DS3622xs+/7.1.0-42661/config.json
Pat URL : https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS3622xs%2B_42661.pat
Downloading pat file from URL : https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS3622xs%2B_42661.pat
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 352M 100 352M 0 0 52.0M 0 0:00:06 0:00:06 --:--:-- 54.2M
File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, is encrypted
File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, has been cached but its encrypted, re-running decrypting process
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Found locally cached pat file /home/tc/custom-module/ds3622xsp_42661.pat
File /home/tc/custom-module/ds3622xsp_42661.pat, is encrypted
Extracting encrypted pat file : /home/tc/custom-module/ds3622xsp_42661.pat to /tmp/pat
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Creating unecrypted pat file ds3622xsp_42661.pat to /home/tc/redpill-load/cache folder
./VERSION
Pat file sha256sum is : 2e1febc08070d72c3be8e00ab067bfbdacb0748bfe5a8e0b08b72d11e494964d
Checking config file existence -> OK
Editing config file -> Verifying config file -> OK !
Clearing temp folders
Processing add_extensions entries found on custom_config.json file : redpill-misc
Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
##################################################################################################################### 100.0%
[OK]
[#] ========================================== redpill-misc ==========================================
[#] Extension name: Misc shell
[#] Description: Misc shell
[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================
Updating extension : redpill-misc contents for model : ds3622xsp_42661
[#] Checking runtime for required tools... [OK]
[#] Updating ds3622xsp_42661 platforms extensions...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
##################################################################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-misc platform ds3622xsp_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install.sh
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install.sh file... [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install-all.sh
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install-all.sh file... [OK]
[#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/ttyd
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/ttyd file... [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install_rd.sh
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install_rd.sh file... [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/... [OK]
[#] Successfully processed recipe for extension redpill-misc platform ds3622xsp_42661
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/... [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
##################################################################################################################### 100.0%
[OK]
[#] ========================================== redpill-boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================
[#] Checking runtime for required tools... [OK]
[#] Updating pocopico.vmxnet3 extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
##################################################################################################################### 100.0%
[#] Extension pocopico.vmxnet3 index is already up to date
[#] Updating redpill-boot-wait extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
##################################################################################################################### 100.0%
[#] Extension redpill-boot-wait index is already up to date
[#] Updating redpill-misc extension...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
##################################################################################################################### 100.0%
[OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds3622xsp_42661 platforms extensions...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
##################################################################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension pocopico.vmxnet3 platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/releases/vmxnet3-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.vmxnet3/ds3622xsp_42661/vmxnet3-4.4.180plus-broadwellnk.tgz
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.vmxnet3/ds3622xsp_42661/vmxnet3-4.4.180plus-broadwellnk.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.vmxnet3/ds3622xsp_42661/vmxnet3-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.vmxnet3/ds3622xsp_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/src/check-vmxnet3.sh to /home/tc/redpill-load/custom/extensions/pocopico.vmxnet3/ds3622xsp_42661/check-vmxnet3.sh
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.vmxnet3/ds3622xsp_42661/check-vmxnet3.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.vmxnet3 platform ds3622xsp_42661
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
##################################################################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3622xsp_42661/boot-wait.sh
##################################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3622xsp_42661/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension redpill-boot-wait platform ds3622xsp_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
##################################################################################################################### 100.0%
[#] Extension redpill-misc for ds3622xsp_42661 platform is already up to date
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3622xsp_42661/boot-wait.sh file... [OK]
[#] Updating extensions... [OK]
[#] Verifying /home/tc/redpill-load/cache/ds3622xsp_42661.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds3622xsp_42661.pat file to /home/tc/redpill-load/build/1656563970/pat-ds3622xsp_42661-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1656563970/pat-ds3622xsp_42661-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1656563970/pat-ds3622xsp_42661-unpacked/zImage to /home/tc/redpill-load/build/1656563970/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1656563970/pat-ds3622xsp_42661-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1656563970/pat-ds3622xsp_42661-unpacked/rd.gz file to /home/tc/redpill-load/build/1656563970/rd-ds3622xsp_42661-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1656563970/rd-ds3622xsp_42661-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1656563970/rd-patched-ds3622xsp_42661.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds3622xsp_42661 platform extensions to /home/tc/redpill-load/build/1656563970/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1656563970/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sda1 to localdiskp1
/dev/sda2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
savedefault
set root=(hd0,msdos3)
echo Loading Linux...
linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
echo Loading initramfs...
initrd /corepure64.gz
echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (USB, Verbose)' {
menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {
Machine is VIRTUAL Hypervisor=VMware
Setting default boot entry to SATA
Caching files for future use
Found /home/tc/redpill-load/cache/ds3622xsp_42661.pat, copying to cache directory : /mnt/sda3/auxfiles
Saving user session for future use. Saving current extensions -> OK !
Saving current user_config.json -> OK !
tc@box:~$ exit
Connection to 10.69.197.144 closed.
T-Mac@Tylers-MacBook-Air ~ %
-
Learning more about lspci, I learned this about the RAID adapter
Slot: 03:00.0 Class: RAID bus controller Vendor: LSI Logic / Symbios Logic Device: SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] SVendor: Fujitsu Technology Solutions SDevice: Device 1177 PhySlot: 160 Rev: 03 -
Thanks for this information. I ended up deleting the VM and starting over. It seems like in my tired stew, I made a good number of mistakes and that it would be easier to start fresh than to fix the mess. My new VM has one SATA Controller for TCRP and then the LSI, that's it. Here are the commands I ran, for anyone running into similar configuration issues
I had date issues that made every step thereafter broken, regardless of the valid internet connection. So from another thread, I run this and it fixes everything
ntpd -p north-america.pool.ntp.org -qStandard update
./rploader.sh update nowStandard upgrade
./rploader.sh fullupgradeGetting a MAC address to add to my virtual network card
./rploader.sh serialgen DS3622xs+That's what I got to a science. It sounds like you're telling me that because my drives are listed as "Invalid slot number," that TCRP isn't able to intelligently map my drives. So I will have to manually map them. Can I use DSM 6 guides to make my satamap? At your request, here's my response to:
lspci -d ::100; lspci -d ::104; lspci -d ::107tc@box:~$ lspci -d ::104 03:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) tc@box:~$Here's what "./rploader.sh satamap now" shows now that I removed all the unnecessary virtual hardware.
Found SCSI HBAs, We need to install the SCSI modules Downloading: scsi-5.10.3-tinycore64.tcz Connecting to repo.tinycorelinux.net (89.22.99.37:80) saving to 'scsi-5.10.3-tinycore64.tcz' scsi-5.10.3-tinycore 100% |********************************| 2632k 0:00:00 ETA 'scsi-5.10.3-tinycore64.tcz' saved scsi-5.10.3-tinycore64.tcz: OK Succesfully installed SCSI modules Found "02:01.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found SCSI/HBA "03:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid bus number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (63 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) Computed settings: SataPortMap=1 DiskIdxMap=10 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file -
4 hours ago, flyride said:
Sorry. At that point it was about 3am and I was just trying to grasp what was going on. New day, although no sleep in between. This is the response when not in root. I am a beginner and this is my first xpenology, I'm not entirely clear what is going on. This is what I understand:
I enter "./rploader.sh satamap now". It sees an SCSI Controller and downloads a module for it, presumably my LSI.
Then it sees SATA Controller one, where TCRP lives. Then it sees SATA Controller two, where a 25GB virtual disk is sitting (do I need this if the LSI works properly? I assume not).
Then it asks me how many virtual ports I want. Is this for the final Synology build? I don't understand this question
Then it revisits the SCSI Controller, identifying it as LSI SAS2008. It sees 15 "unlabeled slot numbers," all with zero drives except one which is labeled as having 65 drives. I honestly have no idea what to make of this. This is likely documented and I'm happy to learn, but I don't understand what I'm looking at. I know things changed a lot for DSM 7 and not all documentation translates.
tc@box:~$ ./rploader.sh satamap now Machine is VIRTUAL Hypervisor=VMware Found SCSI HBAs, We need to install the SCSI modules Downloading: scsi-5.10.3-tinycore64.tcz Connecting to repo.tinycorelinux.net (89.22.99.37:80) saving to 'scsi-5.10.3-tinycore64.tcz' scsi-5.10.3-tinycore 100% |********************************| 2632k 0:00:00 ETA 'scsi-5.10.3-tinycore64.tcz' saved scsi-5.10.3-tinycore64.tcz: OK Succesfully installed SCSI modules Found "02:03.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found "02:04.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Defaulting 8 virtual ports for typical system compatibility Override # of ports or ENTER to accept <8> 8 Found SCSI/HBA "0b:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (1 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid bus number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (65 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) Found SCSI/HBA "03:00.0 VMware PVSCSI SCSI Controller (rev 02)" (0 drives) Computed settings: SataPortMap=18 DiskIdxMap=1000 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file
-
Hey everyone! I actually got my Xpenology fully booted thanks to this virtualization guide and this general install guide, but neither provided me enough details to get my raid card active. To begin, here are my specs:
VM or BareMetal : VM - ESXi 6.7U3
Hardware (Motherboard/CPU) : Gigabyte M370M DS3H / Intel 8400Storage-Controller: 1x LSI SAS 9211-8i (HBA in IT mode)
Hot Plug/Hot Swap Applied : Yes
version of rploader.sh : 0.8.0.3
Platform (DS3622xsp/DS918+/DS920+/DVA3221/DS1621+/DS3615xs/DS3617xs) : 3622xs+
Platform Version (6.2.4/7.0.1/7.1) : 7.1
Platform Revision (42218/42661/42661-U1) : 42661
Current Status : Boots to kernel, but with virtualized disk.As the virtualized guide suggested, I have two SATA Controllers, one with TCRP and the other is just a virtual disk. I also have my LSI 9211-8i in there in IT Mode. lspci -kkq reveals:
0b:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Fujitsu Technology Solutions HBA Ctrl SAS 6G 0/1 [D2607]So its registered by the machine, I just need it initialized by Synology. I read about drivers in the guide linked above, so I ran the following commands:
./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-e xt/master/mpt2sas/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-e xt/master/mpt3sas/rpext-index.jsonI didn't know which had the driver I needed, and frankly I didn't see any negatives by doing both, so I did both. Now I get this, basically saying it sees the controller, but that is has zero
drives. It is also saying that a single SCSI/HBA has 63 drives. I have one drive connected to the SAS:
root@box:/home/tc# ./rploader.sh satamap now Machine is VIRTUAL Hypervisor=VMware Found SCSI HBAs, We need to install the SCSI modules Don't run this as root. Found "02:03.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found "02:04.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Defaulting 8 virtual ports for typical system compatibility Override # of ports or ENTER to accept <8> ds Non-numeric, overridden to 0 Found SCSI/HBA "0b:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid bus number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (63 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) Found SCSI/HBA "03:00.0 VMware PVSCSI SCSI Controller (rev 02)" (0 drives) Computed settings: SataPortMap=10 DiskIdxMap=1000 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json fileI seemingly have all the pieces here, just need some help putting it altogether. I plan on connecting eight drives absolute max, and have four drives in the short term. For testing, there is currently one drive plugged into my LSI card with a SAS cable. I would really appreciate some guidance.
-
Hey everyone. My coworker got me a free QNAP but it's too slow, so I am rebuilding my ESXi server for low power since NAS functions can do the majority of my desired functions. So..here I am
-
1
-
DSM 7.1 in ESXi: Mapping LSI2008 Card
in DSM 7.x
Posted
Oh awesome. So not entirely something I did wrong. Many Many thanks again for all your help. I was so close to giving up.