malt0r
-
Posts
2 -
Joined
-
Last visited
Posts posted by malt0r
-
-
Got DSM 7.0.1 U2 running on a Supermicro X9SCA-F Board. Working good so far. I also added a LSI2008 HBA Card and after adding the extension it's recognized as well. One small hickup though:
Onboard I have 6 SATA Ports + 8 Ports from the HBA card.
I want to use the 8 Ports of the HBA first then use the 6 onboard SATA ports.
I changed my SataPortMap and DiskIdxMap as follows:
SataPortMap=68
DiskIdxMap=0800
Now my Onboard Sata Ports start at Disk 9 but the HBA Ports still start from Disk 6.
When I lower the SataPortMap to e.g. 48 the HBA Disks start at 5 but I can only use 4 Ports from the onboard controller.
Any idea what's going on or I'm doing wrong? Any help appreciated.
LSI HBA Port Map
in Developer Discussion Room
Posted
Got DSM 7.0.1 U2 running on a Supermicro X9SCA-F Board. Working good so far. I also added a LSI2008 HBA Card and after adding the mpt2sas extension it's recognized as well. One small hickup though:
Onboard I have 6 SATA Ports + 8 Ports from the HBA card.
I want to use the 8 Ports of the HBA first then use the 6 onboard SATA ports.
I changed my SataPortMap and DiskIdxMap as follows:
SataPortMap=68
DiskIdxMap=0800
Now my Onboard Sata Ports start at Disk 9 but the HBA Ports still start from Disk 6.
When I lower the SataPortMap to e.g. 48 the HBA Disks start at 5 but I can only use 4 Ports from the onboard controller.
Any idea what's going on or I'm doing wrong? Any help appreciated.