Got DSM 7.0.1 U2 running on a Supermicro X9SCA-F Board. Working good so far. I also added a LSI2008 HBA Card and after adding the mpt2sas extension it's recognized as well. One small hickup though:
Onboard I have 6 SATA Ports + 8 Ports from the HBA card.
I want to use the 8 Ports of the HBA first then use the 6 onboard SATA ports.
I changed my SataPortMap and DiskIdxMap as follows:
SataPortMap=68
DiskIdxMap=0800
Now my Onboard Sata Ports start at Disk 9 but the HBA Ports still start from Disk 6.
When I lower the SataPortMap to e.g. 48 the HBA Disks start at 5 but I can only use 4 Ports from the onboard controller.
Any idea what's going on or I'm doing wrong? Any help appreciated.