iansc
-
Posts
14 -
Joined
-
Last visited
Posts posted by iansc
-
-
20 hours ago, Rick4 said:
Tried, it works, at the informations panel visible a GTX 1660, RAM size, GPU and RAM speed. What advance can i get, if i use a DVA3221 instead DVA1621? At this moment i want to use only one CAM.
AI functions on more than 2 cam.
-
On 5/1/2023 at 12:18 PM, K1000 said:
Hi everyone,
i have just installed DVA3221 on ESXi with ARPL. Everything is fine but the DSM doesn't recognise my GTX 1650. I have activated passthrough and included in the virtual machine. What should i do to get it recognised ?
it looks like the passthrought is ok as "sudo lspci -nnv" shows this:
03:00.0 Class [0300]: Device [10de:1f82] (rev a1)
DeviceName: pciPassthru0
Subsystem: Device [10de:1f82]
Flags: bus master, fast devsel, latency 64, IRQ 18
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at e4000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [250] Latency Tolerance Reporting
Capabilities: [258] L1 PM Substates
Capabilities: [128] Power Budgeting <?>
Capabilities: [420] Advanced Error Reporting
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] Secondary PCI Express
Capabilities: [bb0] Resizable BAR <?>
Kernel driver in use: nvidia
Any help would be appreciated.
Gainward Pegasus GTX 1650 4Gb, Pentium G4400, ESXi 8.0.1, ARPL 1.1 beta2a, DSM DVA3221 7.1.1 42962 update 5.
If yours GTX 1650 have GDDR6, not work because is more new than Nvidia driver on synology.
I have de same issue.
-
On 4/17/2023 at 7:52 AM, rolandas said:
Hi Lads
have 2 pcs dell 7020 and 3040
have Quadro P1000, P2000 and GTX1650 4GB DDR5
All Redpill and arpl loaders work fine, and booting without issues, except DVA3219 and DVA3221 with is stuckt booting after ip displayed.
Any advice\solution?
Hi.
I have a dell 3050 and boot stuckt on ip too.
The way I used to work around the problem was installing ESXI.
But with that, there is an error in the ARPL, it does not format the HD.
To fix this, just look on the ARPL github and there they show you how to fix this. -
On 10/3/2022 at 1:01 PM, hoangduy1505 said:
I tested with my fake nas 4 bays, it run i5-4210U with iGPU Intel® HD Graphics 4400.
It ready to add 8 cam but it can not to run face recognition, I think my old iGPU not support this funtion
AI work only from 6th intel generation.
-
On 7/1/2022 at 4:45 PM, fbelavenuto said:
Hello everyone, I would like to share a personal project that I am developing. It is another loader for TTG Redpill, intended to be as automatic and user-friendly as possible.
The link is below, download the image and record it on a flash drive, the rest is done on the same computer.
I'm Brazilian and I'm not good at English language, so forgive me for translation errors.
I used forum knowledge and code from various loaders developed by TTG, pocopico, jumkey, Jun and many others.
Hope you like it.
https://github.com/fbelavenuto/arpl
Edit: An important information that I forgot to mention is that I developed a simple patch to no longer display the DUMMY port error on models without device-tree, the user will be able to install without having to worry about it
Hi man. I'm Brazilian too.
I'm using version 0.4-alpha3 on the barematel and everything is working perfectly.
Running the DVA1622.
If you need help with testing, I'm available-
1
-
-
42 minutes ago, apriliars3 said:
I have two Virtual machineYou run satamap on tcrp?
IF Yes, try whitout satamap.
-
1 minute ago, IG-88 said:
the fact it boots and you find it in network is enough
If boots and networks is enough, i test in an ancient core 2 duo and works too.
-
3 hours ago, IG-88 said:
i'd say need a test with something older like 2nd gen sandybridge or older (and a good look into the kernel config files of 920+ and dva1622)
@IG-88, I have make a test on 1st generation (i3-380M). Not work.
System get boot, but installation of DMS goes until 56% and report error. -
33 minutes ago, IG-88 said:
on a 3rd gen intel cpu hevc/h.265 is not expected to work (see table her https://en.wikipedia.org/wiki/Intel_Quick_Sync_Video)
i guess it should be deactivated in jellyfin (same for vp8/9, av1)
The file i was running was h264.
I active all only for test.
-
More info transcode:
- CPU activit:
- Jellyfin status:
-Jellyfin config:
-
1
-
-
6 minutes ago, IG-88 said:
7.1 in both cases i guess?
Yes.
I tried in an old fx 8350 and partial works.
Disks not find, but i not tried a new installation, i used the disk and ubsdrive maked in the laptop. -
1 hour ago, IG-88 said:
with a i7 3632qm (https://ark.intel.com/content/www/us/en/ark/products/71670/intel-core-i73632qm-processor-6m-cache-up-to-3-20-ghz-bga.html)
thats kind of interesting as (in theory) the dva1622 would have the same minimum as 920+ (same platform gemini lake), 4th gen aka haswell, but with the hint already here (no cpu gen mentioned, only that its to old for the other dva, https://xpenology.com/forum/topic/63410-develop-and-refine-the-dva1622-loader/?do=findComment&comment=288453) and that now it seems the dva1622 is much more interesting as it might open the field for a lot of older systems using transcoding if it does not need 4th gen as minimum - i'd say need a test with something older like 2nd gen sandybridge or older (a o good look into the kernel config files of 920+ and dva1622)
I saw this in a previous post of yours, so I thought it was interesting to share.
I had tried installing the 920+ on this same laptop and it didn't work.
-
Hey.
I was successful install on baremetal on a Laptop Del Inspiron.
- Internal display works.
- Transcode in jellyfin works.
- Recognized all disks.
- Only AI in survillance center not work.
-
1
-
DVA3221 loader development thread
in Developer Discussion Room
Posted
Not compatible.