rossi
-
Posts
4 -
Joined
-
Last visited
Posts posted by rossi
-
-
On 5/4/2021 at 10:43 PM, rossi said:
Just found out about the serial port output. Below is the output. I couldn't get my logins to work at the prompt though
Would really appreciate anyone's feedback on this.
Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. [ 2.539592] ata5: No present pin info for SATA link down event [ 2.853157] ata7: send port disabled event [ 2.853158] ata7: No present pin info for send port disabled event [ 2.853179] ata8: send port disabled event [ 2.853180] ata8: No present pin info for send port disabled event patching file etc/rc Hunk #1 succeeded at 182 (offset 11 lines). patching file etc/synoinfo.conf Hunk #2 FAILED at 263. Hunk #3 FAILED at 291. Hunk #4 FAILED at 304. Hunk #5 FAILED at 312. Hunk #6 FAILED at 328. 5 out of 6 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej patching file linuxrc.syno Hunk #1 succeeded at 40 with fuzz 2 (offset 1 line). Hunk #2 succeeded at 207 (offset 72 lines). Hunk #3 succeeded at 645 (offset 93 lines). patching file usr/sbin/init.post START /linuxrc.syno Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading module BusLogic ... [ OK ] :: Loading module vmw_pvscsi ... [ OK ] :: Loading module megaraid_mm ... [ OK ] :: Loading module megaraid_mbox ... [ OK ] :: Loading module scsi_transport_spi ... [ OK ] :: Loading module mptbase ... [ OK ] :: Loading module mptscsih ... [ OK ] :: Loading module mptspi ... [ OK ] :: Loading module mptctl ... [ OK ] :: Loading module megaraid ... [ OK ] :: Loading module megaraid_sas ... [ OK ] :: Loading module scsi_transport_sas ... [ OK ] :: Loading module raid_class ... [ OK ] :: Loading module mpt3sas ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module rtc-cmos ... [ OK ] Insert net driver(Mindspeed only)... Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 [ 4.309420] md: invalid raid superblock magic on sda5 [ 4.316554] md: invalid raid superblock magic on sdb5 [ 4.368515] md: invalid raid superblock magic on sdc5 [ 4.519038] md: invalid raid superblock magic on sdd5 [ 4.580943] md: invalid raid superblock magic on sdf3 Partition Version=8 /sbin/e2fsck exists, checking /dev/md0... /sbin/e2fsck -pvf returns 0 Mounting /dev/md0 /tmpRoot ------------upgrade Begin upgrade procedure No upgrade file exists End upgrade procedure ============upgrade Exit on error [2] .noroot exists... [ 5.943437] sd 8:0:0:0: [synoboot] No Caching mode page found [ 5.949193] sd 8:0:0:0: [synoboot] Assuming drive cache: write through Tue May 4 21:38:07 UTC 2021 /dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=8170616k,nr_inodes=2042654,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 2 starting pid 4839, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [ OK ] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] rc: Use all internal disk as swap. /etc/rc: line 117: /etc/rc: /usr/syno/bin/synodiskpathparse: not foundline 117: awk: not found rc: Failed to parse partition sdf2 :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module e1000e ... [ OK ] :: Loading module i2c-algo-bit ... [ OK ] :: Loading module igb ... [ OK ] :: Loading module ixgbe ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module mii ... [ OK ] :: Loading module libphy ... [ OK ] :: Loading module atl1 ... [ OK ] :: Loading module atl1e ... [ OK ] :: Loading module atl1c ... [ OK ] :: Loading module alx ... [ OK ] :: Loading module uio ... [ OK ] :: Loading module jme ... [ OK ] :: Loading module skge ... [ OK ] :: Loading module sky2 ... [ OK ] :: Loading module qla3xxx ... [ OK ] :: Loading module qlcnic ... [ OK ] :: Loading module qlge ... [ OK ] :: Loading module netxen_nic ... [ OK ] :: Loading module sfc ... [ OK ] :: Loading module e1000 ... [ OK ] :: Loading module pcnet32 ... [ OK ] :: Loading module vmxnet3 ... [ OK ] :: Loading module bnx2 ... [ OK ] :: Loading module cnic ... [FAILED] :: Loading module tg3 ... [ OK ] :: Loading module usbnet ... [ OK ] :: Loading module ax88179_178a ... [ OK ] :: Loading module button ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] :: Loading module synobios ... [ OK ] udhcpc (v1.16.1) started udhcpc (v1.16.1) started [ 10.460458] usb 1-9: unable to read config index 0 descriptor/all [ 10.466547] usb 1-9: can't read configurations, error -110 eth0 Link encap:Ethernet HWaddr D0:50:99:C2:9E:B7 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:df200000-df220000 eth1 Link encap:Ethernet HWaddr D0:50:99:C2:9E:B8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:df100000-df17ffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd -i eth0 -i eth1 eth0 not RUNNING (15): upnp:rootdevice (51): uuid:upnp_SynologyNAS-d05099c29eb8::upnp:rootdevice (58): Synology/synology_apollolake_918+/6.2-24922/169.254.137.22 (47): http://169.254.137.22:5000/description-eth1.xml Connected. done. /usr/syno/bin/reg_ssdp_service 169.254.137.22 d05099c29eb8 6.2-24922 synology_apollolake_918+ eth1 Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module hid ... [ OK ] :: Loading module usbhid ... [ OK ] :: Loading module syno_hddmon ... [FAILED] ============ Dat Tue May 4 21:38:19 2021 DiskStation login:... success... I created a new USB boot device but couldn't connect.. the serial connection was a godsend!
I had no success with it initially. I noted the 2 NICs I had weren't getting an IP address. They were aggregated on the switch on a VLAN. So to cut out the complexity, I plugged NIC1 into a VLAN port and assigned a static address 192.168.1.100 (using the ifconfig command and a telnet daily password generator, logged in as 'root'). I could finally ping the NAS... so I logged into the Web UI and saw I required an upgrade and to migrate my disks which remained connected. I upgraded using "DSM_DS918+_25426.pat" as recommended and after a while (and a few disk errors to upgrade to an updated file system version), I was back up and running! Hope this is of use to anyone in similar situation. For me, the breakthrough was the serial port which I hadn't been aware of, considering that the live screen doesn't show any log information that I'm aware of.
-
On 5/3/2021 at 9:57 PM, rossi said:
Hi all,, have run into difficulties in getting this running. I installed the patch (details below) and although I still get Juns Loader screen, I can't ping, SSH or web into DSM.
- Using Jun’s Loader v1.04b and DSM DSM 6.2.2 (can't remember the rest unfortunately)
- ASRock MB E3C236D2I
- WD PC SN520 NVMe (128GB)
Prior to issue, I had copied "libsynonvme.so.1" to /volume1/backups/
and ran the following commands:
sudo -i cp /volume1/backups/libsynonvme.so.1 /usr/lib64 cd /usr/lib64 chmod 777 libsynonvme.so.1 shutdown -r now
Would appreciate any suggestions on how I could get things back to normal. Tried a number of reboots and even removed the MVMe drive. Would anyone know how I could get to the CLI so I could at least try deleting the "libsynonvme.so.1" file?
Just found out about the serial port output. Below is the output. I couldn't get my logins to work at the prompt though
Would really appreciate anyone's feedback on this.
Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. [ 2.539592] ata5: No present pin info for SATA link down event [ 2.853157] ata7: send port disabled event [ 2.853158] ata7: No present pin info for send port disabled event [ 2.853179] ata8: send port disabled event [ 2.853180] ata8: No present pin info for send port disabled event patching file etc/rc Hunk #1 succeeded at 182 (offset 11 lines). patching file etc/synoinfo.conf Hunk #2 FAILED at 263. Hunk #3 FAILED at 291. Hunk #4 FAILED at 304. Hunk #5 FAILED at 312. Hunk #6 FAILED at 328. 5 out of 6 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej patching file linuxrc.syno Hunk #1 succeeded at 40 with fuzz 2 (offset 1 line). Hunk #2 succeeded at 207 (offset 72 lines). Hunk #3 succeeded at 645 (offset 93 lines). patching file usr/sbin/init.post START /linuxrc.syno Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading module BusLogic ... [ OK ] :: Loading module vmw_pvscsi ... [ OK ] :: Loading module megaraid_mm ... [ OK ] :: Loading module megaraid_mbox ... [ OK ] :: Loading module scsi_transport_spi ... [ OK ] :: Loading module mptbase ... [ OK ] :: Loading module mptscsih ... [ OK ] :: Loading module mptspi ... [ OK ] :: Loading module mptctl ... [ OK ] :: Loading module megaraid ... [ OK ] :: Loading module megaraid_sas ... [ OK ] :: Loading module scsi_transport_sas ... [ OK ] :: Loading module raid_class ... [ OK ] :: Loading module mpt3sas ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module rtc-cmos ... [ OK ] Insert net driver(Mindspeed only)... Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 [ 4.309420] md: invalid raid superblock magic on sda5 [ 4.316554] md: invalid raid superblock magic on sdb5 [ 4.368515] md: invalid raid superblock magic on sdc5 [ 4.519038] md: invalid raid superblock magic on sdd5 [ 4.580943] md: invalid raid superblock magic on sdf3 Partition Version=8 /sbin/e2fsck exists, checking /dev/md0... /sbin/e2fsck -pvf returns 0 Mounting /dev/md0 /tmpRoot ------------upgrade Begin upgrade procedure No upgrade file exists End upgrade procedure ============upgrade Exit on error [2] .noroot exists... [ 5.943437] sd 8:0:0:0: [synoboot] No Caching mode page found [ 5.949193] sd 8:0:0:0: [synoboot] Assuming drive cache: write through Tue May 4 21:38:07 UTC 2021 /dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=8170616k,nr_inodes=2042654,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 2 starting pid 4839, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [ OK ] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] rc: Use all internal disk as swap. /etc/rc: line 117: /etc/rc: /usr/syno/bin/synodiskpathparse: not foundline 117: awk: not found rc: Failed to parse partition sdf2 :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module e1000e ... [ OK ] :: Loading module i2c-algo-bit ... [ OK ] :: Loading module igb ... [ OK ] :: Loading module ixgbe ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module mii ... [ OK ] :: Loading module libphy ... [ OK ] :: Loading module atl1 ... [ OK ] :: Loading module atl1e ... [ OK ] :: Loading module atl1c ... [ OK ] :: Loading module alx ... [ OK ] :: Loading module uio ... [ OK ] :: Loading module jme ... [ OK ] :: Loading module skge ... [ OK ] :: Loading module sky2 ... [ OK ] :: Loading module qla3xxx ... [ OK ] :: Loading module qlcnic ... [ OK ] :: Loading module qlge ... [ OK ] :: Loading module netxen_nic ... [ OK ] :: Loading module sfc ... [ OK ] :: Loading module e1000 ... [ OK ] :: Loading module pcnet32 ... [ OK ] :: Loading module vmxnet3 ... [ OK ] :: Loading module bnx2 ... [ OK ] :: Loading module cnic ... [FAILED] :: Loading module tg3 ... [ OK ] :: Loading module usbnet ... [ OK ] :: Loading module ax88179_178a ... [ OK ] :: Loading module button ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] :: Loading module synobios ... [ OK ] udhcpc (v1.16.1) started udhcpc (v1.16.1) started [ 10.460458] usb 1-9: unable to read config index 0 descriptor/all [ 10.466547] usb 1-9: can't read configurations, error -110 eth0 Link encap:Ethernet HWaddr D0:50:99:C2:9E:B7 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:df200000-df220000 eth1 Link encap:Ethernet HWaddr D0:50:99:C2:9E:B8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:df100000-df17ffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd -i eth0 -i eth1 eth0 not RUNNING (15): upnp:rootdevice (51): uuid:upnp_SynologyNAS-d05099c29eb8::upnp:rootdevice (58): Synology/synology_apollolake_918+/6.2-24922/169.254.137.22 (47): http://169.254.137.22:5000/description-eth1.xml Connected. done. /usr/syno/bin/reg_ssdp_service 169.254.137.22 d05099c29eb8 6.2-24922 synology_apollolake_918+ eth1 Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module hid ... [ OK ] :: Loading module usbhid ... [ OK ] :: Loading module syno_hddmon ... [FAILED] ============ Dat Tue May 4 21:38:19 2021 DiskStation login: -
Hi all,, have run into difficulties in getting this running. I installed the patch (details below) and although I still get Juns Loader screen, I can't ping, SSH or web into DSM.
- Using Jun’s Loader v1.04b and DSM DSM 6.2.2 (can't remember the rest unfortunately)
- ASRock MB E3C236D2I
- WD PC SN520 NVMe (128GB)
Prior to issue, I had copied "libsynonvme.so.1" to /volume1/backups/
and ran the following commands:
sudo -i cp /volume1/backups/libsynonvme.so.1 /usr/lib64 cd /usr/lib64 chmod 777 libsynonvme.so.1 shutdown -r now
Would appreciate any suggestions on how I could get things back to normal. Tried a number of reboots and even removed the MVMe drive. Would anyone know how I could get to the CLI so I could at least try deleting the "libsynonvme.so.1" file?
eth1 missing after deleting NIC bond using the synonet --la_del bondX command
in The Noob Lounge
Posted
Greetings all,
I'm hoping someone can share their experience with me on this one.
I recently did a Ubiquiti UniFi upgrade that went terribly wrong. I had 2 NICS agregated from my DSM 6.2.3 but to let me back in, I had to delete the network bond via a serial cable using the "synonet --la_del bondX" command. I have managed to get my network and DSM back online but NIC 1 had disappeared. As a result, I can't start my Virtual Machines. There is no eth1 when using the ifconfig command and the "add bond" option in DSM UI (networks) is greyed out. Created a fresh USB key using Juns 1.04b loader and although it ran a repair, there is still no sign of eth1. I haven't modified my grub.cfg file so I still have 2 NICs in it. This was working 24 hours ago.
Any suggestions greatly appreciated