Just found out about the serial port output. Below is the output. I couldn't get my logins to work at the prompt though
Would really appreciate anyone's feedback on this.
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
[ 2.539592] ata5: No present pin info for SATA link down event
[ 2.853157] ata7: send port disabled event
[ 2.853158] ata7: No present pin info for send port disabled event
[ 2.853179] ata8: send port disabled event
[ 2.853180] ata8: No present pin info for send port disabled event
patching file etc/rc
Hunk #1 succeeded at 182 (offset 11 lines).
patching file etc/synoinfo.conf
Hunk #2 FAILED at 263.
Hunk #3 FAILED at 291.
Hunk #4 FAILED at 304.
Hunk #5 FAILED at 312.
Hunk #6 FAILED at 328.
5 out of 6 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #1 succeeded at 40 with fuzz 2 (offset 1 line).
Hunk #2 succeeded at 207 (offset 72 lines).
Hunk #3 succeeded at 645 (offset 93 lines).
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [ OK ]
:: Loading module usbcore ... [ OK ]
:: Loading module xhci-hcd ... [ OK ]
:: Loading module xhci-pci ... [ OK ]
:: Loading module usb-storage ... [ OK ]
:: Loading module BusLogic ... [ OK ]
:: Loading module vmw_pvscsi ... [ OK ]
:: Loading module megaraid_mm ... [ OK ]
:: Loading module megaraid_mbox ... [ OK ]
:: Loading module scsi_transport_spi ... [ OK ]
:: Loading module mptbase ... [ OK ]
:: Loading module mptscsih ... [ OK ]
:: Loading module mptspi ... [ OK ]
:: Loading module mptctl ... [ OK ]
:: Loading module megaraid ... [ OK ]
:: Loading module megaraid_sas ... [ OK ]
:: Loading module scsi_transport_sas ... [ OK ]
:: Loading module raid_class ... [ OK ]
:: Loading module mpt3sas ... [ OK ]
:: Loading module mdio ... [ OK ]
:: Loading module rtc-cmos ... [ OK ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[ 4.309420] md: invalid raid superblock magic on sda5
[ 4.316554] md: invalid raid superblock magic on sdb5
[ 4.368515] md: invalid raid superblock magic on sdc5
[ 4.519038] md: invalid raid superblock magic on sdd5
[ 4.580943] md: invalid raid superblock magic on sdf3
Partition Version=8
/sbin/e2fsck exists, checking /dev/md0...
/sbin/e2fsck -pvf returns 0
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
Exit on error [2] .noroot exists...
[ 5.943437] sd 8:0:0:0: [synoboot] No Caching mode page found
[ 5.949193] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
Tue May 4 21:38:07 UTC 2021
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=8170616k,nr_inodes=2042654,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 2
starting pid 4839, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [ OK ]
:: Mounting tmpfs ... [ OK ]
:: Mounting devtmpfs ... [ OK ]
:: Mounting devpts ... [ OK ]
:: Mounting sysfs ... [ OK ]
rc: Use all internal disk as swap.
/etc/rc: line 117: /etc/rc: /usr/syno/bin/synodiskpathparse: not foundline 117: awk: not found
rc: Failed to parse partition sdf2
:: Loading module fat ... [ OK ]
:: Loading module vfat ... [ OK ]
:: Loading module udp_tunnel ... [ OK ]
:: Loading module ip6_udp_tunnel ... [ OK ]
:: Loading module vxlan ... [ OK ]
:: Loading module e1000e ... [ OK ]
:: Loading module i2c-algo-bit ... [ OK ]
:: Loading module igb ... [ OK ]
:: Loading module ixgbe ... [ OK ]
:: Loading module r8168 ... [ OK ]
:: Loading module mii ... [ OK ]
:: Loading module libphy ... [ OK ]
:: Loading module atl1 ... [ OK ]
:: Loading module atl1e ... [ OK ]
:: Loading module atl1c ... [ OK ]
:: Loading module alx ... [ OK ]
:: Loading module uio ... [ OK ]
:: Loading module jme ... [ OK ]
:: Loading module skge ... [ OK ]
:: Loading module sky2 ... [ OK ]
:: Loading module qla3xxx ... [ OK ]
:: Loading module qlcnic ... [ OK ]
:: Loading module qlge ... [ OK ]
:: Loading module netxen_nic ... [ OK ]
:: Loading module sfc ... [ OK ]
:: Loading module e1000 ... [ OK ]
:: Loading module pcnet32 ... [ OK ]
:: Loading module vmxnet3 ... [ OK ]
:: Loading module bnx2 ... [ OK ]
:: Loading module cnic ... [FAILED]
:: Loading module tg3 ... [ OK ]
:: Loading module usbnet ... [ OK ]
:: Loading module ax88179_178a ... [ OK ]
:: Loading module button ... [ OK ]
:: Loading module leds-lp3943 ... [ OK ]
:: Loading module synobios ... [ OK ]
udhcpc (v1.16.1) started
udhcpc (v1.16.1) started
[ 10.460458] usb 1-9: unable to read config index 0 descriptor/all
[ 10.466547] usb 1-9: can't read configurations, error -110
eth0 Link encap:Ethernet HWaddr D0:50:99:C2:9E:B7
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:16 Memory:df200000-df220000
eth1 Link encap:Ethernet HWaddr D0:50:99:C2:9E:B8
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:df100000-df17ffff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
:: Starting syslogd ... [ OK ]
:: Starting scemd
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0 -i eth1
eth0 not RUNNING
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-d05099c29eb8::upnp:rootdevice
(58): Synology/synology_apollolake_918+/6.2-24922/169.254.137.22
(47): http://169.254.137.22:5000/description-eth1.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.137.22 d05099c29eb8 6.2-24922 synology_apollolake_918+ eth1
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module hid ... [ OK ]
:: Loading module usbhid ... [ OK ]
:: Loading module syno_hddmon ... [FAILED]
============ Dat
Tue May 4 21:38:19 2021
DiskStation login: