3 84
-
Posts
21 -
Joined
-
Last visited
Posts posted by 3 84
-
-
so what do i do now? My drives aren`t showing up after the bois update.
-
16 hours ago, IG-88 said:
afair it was about ide compatibility when using sata with older systems (WinXP and older?)
that does explain a lot as this pc was made for windows vista but you said win xp? btw last year in 2020 i tried it with windows 10 and it worked
-
3 hours ago, IG-88 said:
my point was that if going to enhanced there might be a sata setting where you can switch to ahci mode (never seen lenovo bios gui, bigger vendors like lenovo or hp have there own gui so its not much help to know where its in a standard ami or phoenix bios)
sorry, i already tried that and it tells you nothing except this crap about a IDE config which dose`t make sense when there`s no ide port
-
9 hours ago, IG-88 said:
try enhanced, save, reboot and go again into bios and look if options about sata have changed and if you see something about ahci
now reboot with the loader and see if the disk is recognized
that chipset uses ICH7 and that is capable of ahci when its set by bios
bios updates would be here (if you dont have the latest)
i already tried enhanced and it never worked and also, which bios version do i use?
-
in the bios in sata configuration there`s three options enhanced, compatible or disabled
-
1 hour ago, IG-88 said:
not to you maybe
i was talking about ahci not being in the bios as an option
-
39 minutes ago, 3 84 said:
there`s no option in bios, oops i accidentally thou u meant to turn it off in bois
crap does that mean i have to switch back to dsm 5.2 loader because theres only IDE mode? (Edit: i feel like the non-emoji version is better)
-
i feel like i shoud bios flash to the latest bios version but idk which motherboard im using and there no bios flash option in bios
-
my cpu is a core 2 duo(2.8ghz) , 4TB seagate barracuda motherboard is a FRU Intel G31 all in a A57 lenovo thinkcenter
-
1 hour ago, IG-88 said:
no, change to ahci
there`s no option in bios, oops i accidentally thou u meant to turn it off in bois
-
1 hour ago, 3 84 said:
im not sure which option i should choose is IDE mode ok?
nope it didn`t work
-
fu*k i think i know were it is but i im not sure which option i should choose is IDE mode ok?
-
sorry i only do javascript and not c++ or whatever you use to make your boot loaders
-
16 hours ago, IG-88 said:
the mac does not matter when installing, if you want to use WOL then the hardware mac needs to be in grub.conf, the only important thing for installing is usb vid/pid
you did not mentioned the hardware, if sata onboard then it needs to be ahci mode (check in bios)
it didn`t work until i used the pc`s mac address but whatever and it`s using the same ip address that was on the previous version, i already edited the pid and the vid from the start, i double checked and there is no ahci mode in bios, i know what it is though, probably its not a thing in this type of bios because this was made for windows vista (btw this is a custom built NAS)
-
-
I can`t find it in the bios but i`ll try again, and it doesn't make sense, it was working in the previous versions and the drive is showing up in the bios so it hasn`t failed also, it didn`t work until i used the pc`s mac address and it`s using the same ip address that was on the previous version.
-
6 hours ago, IG-88 said:
what hardware are you using?
you can try 6.1 loader 1.02b for 3615 or 3617
and about how to ..., we have a dedicated section for this
https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/
https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/
halt I managed to do a fresh install of the 6.2 loader, I realised I had to use the mac address of the pc and not from a generator but now its not showing up the one hdd, my old files don`t matter cos it`s all backed up in the google cloud
-
-
i need help, as in my dsm isn`t showing up every time i try to upgrade. and when i try to boot to something like dsm 6.0.2 it shows up but after the dsm installation it flops and dose`t show up.
how do I upgrade from dsm 5.2 instantly to dsm 6.2
in The Noob Lounge
Posted · Edited by 3 84
So shall i just convert back to dsm 5.2? Sh*t all my files are unreadable from the could were all my files are because synology compressed it with an unknown codec