nrg5009

@IG-88 I really appreciate your help but I am only following half of what you have suggested here. System just rebooted up for me to pull the log files (posted messages above) so can I assume that the ram, capacitors and PSU are ok? They were new purchases in 2020. I think my old school motherboard included a serial cable and has a port on it some where. How do I connect to it and check for a local login? Does it just plug into an old monitor or dongle adapter?

@test4321 I uploaded the messages file from /var/log/dsm above but like I said in my original post very noob. Not sure what I am looking at/looking for. As far as hardware goes, yes the CPU is very old (ebay find for another project that didn't pan out) and the motherboard is old but I bought NiB from ebay still sealed in packaging in October of last year. From ebay so I'm taking that with a grain of salt could be a repackaged scam but seemed all there and sealed. Ram and HDDs/SSD were all bought new for this build after I had the extra CPU laying around without a purpose.

Ok, I generated the log files. Whoa there are alot. Where should I look, what can I post that would help decipher all this data. Attached is messages file. Does this help? messages

Hello @test4321, thanks for your response. My cache is read only and it is only about 20% full at the moment, it has fluctuated as high as 70% in the past. It is also a pretty small SSD (120GB) compared to the 2TB HDDs if that makes any difference? Any other suggestions?

Hello, hoping someone can help or point me in the right direction. I have been running xpenology since November and things were great until the last few weeks. Now my NAS keeps disappearing from my network, router says it is not online and WoLAN gets no response. Device is still running but there is no way to reach it over the network without manually rebooting it. At first it was a week or more between instances, now it only last a few hours or less before disappearing. After rebooting there are no apparent messages or issues in the log application to hint at what the issue is. System Details: Jun’s loader v1.02b DS3615xs running DSM 6.1.7 Jetway NF98-QM57 Mini-ITX Motherboard 1st Gen Intel Core i7 Mobile 640M 8GB DDR3 Memory Three HHDs in RAID5 plus an SSD Cache and Hot Spare More than willing to try any suggestions or upload additional information, very nooby here and with linux in general.