yeastring

1.04b with 918+ worked perfectly. Reflashed, did a clean install and everything is working perfectly. Thank you so much!

Hello all, TL:DR; LAN goes dark on reboot after initial install, kills connection to LAN and cannot be found on find.synology. First time Xpenology builder. Attempting to do fresh install 3615xs 6.1.7 with Jun's loader 1.02b on a UNAS 401 pre-built: - Celeron J3455 - Asrock 3455-ITX (BIOS 1.80 latest) No problems following instructions to make the bootloader, system boots to USB no problem. Problem: - On first boot, everything was working as expected. Device was recognized on find.synology.com, proceeded to install 6.1.7_15284 .pat. - 10min timer started up as part of install process, but when machine rebooted, all access LEDs on the ethernet port shut off and the device wouldn't reconnect to the network. - Had to reflash bootloader to get the ethernet working again and accessible via LAN, and find.synology said that the device could be "recovered" - Attempted "recovery", device restarted again with another 10min timer and LAN cut as with before. What I've tried: - Reflashing 6.1.7 several timers, double checked grub.cfg - Tried extra.lzma via OSFMount -- no discernable difference - 6.2.3 with 1.03b bootloader and couldn't even get the DiskStation to be discovered on find.synology Could this be an issue with the MAC address? I've left it at default in grub.cfg because I can't connect the device to the network to see what the MAC is -- and the brief time it was connected, the MAC address listed in my router settings was recognized as the default grub.cfg address... Very stumped, followed all the directions to the letter. Thanks in advance for any help or suggestions, E