Jump to content
XPEnology Community

Jizar Stoffel

Member
 View Profile  See their activity

  • Posts

    47

  • Joined

  • Last visited

 Content Type 

Posts posted by Jizar Stoffel

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted · Edited by Jizar Stoffel

    Hey guys, its been awhile... I have been running this build for several months now without problem. but lately my Drive 8 have been crashing non-stop. 
    I have already Replace the drive with brand new ones many times (4 to be exact). and everytime I try to repair the Storagepool, It either crashes or say system partition failed. What else can I do? short of have to remount the whole thing, I got pretty much 10TB of data so far. would hate to loose all that!

     

    edit: the version Im running is not the same as my signature, it is DSM 7.1-42661

     

    image.thumb.png.e68ee2de0b2ef882048b6e21c2e32d42.png

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    14 minutes ago, phone guy said:

    I had a 2nd nic port that worked in dsm623 with jun104b loader, that I had to talk dirty to in order to make it work too! I had to install a modified driver for that 2nd nic because it was on the usb bus not the pci bus, but it worked in dsm6, not in dsm7. 🤪

     

    The jmb575 sata card work, no switch but 5 ports. I dont know of any 8 port sata, that why I ordered the sas card. 8 sata ports, and the 3622 is supposed to work great with those since the real 3622 uses similar or same type of interface. You need a sas HBA IT MODE card, recommendations are Dell H200/H310, IBM 1015, LSI 9211 8i. These are all over ebay with cables for about $50 USD. Once flashed to it mode, they are all the same... there are other models with pci3.0 x8 if your mobo has that (it probably does), but unless your running ssd drives, pci2.0 x8 is enough for 8 spinning HDD.  The advantage to ahci sata is no additional drivers, but I dont know of 1 with 8 ports and no switch/multiplexer - that doesnt mean it doesnt exist, you'd have to research your choice of sata card and verify NO SWITCH

    I need to do some research on this.

    my MB only has 2 pci slots. It seems it would be cheaper for me to buy another MB with more slots, since I already have about 3 4port PCI cards laying around somewhere.

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted · Edited by Jizar Stoffel

    3 minutes ago, phone guy said:

    Did you try and let it satamap for you? and fyi, peter suh made an auto script too you can execute from tc using wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/m.sh.gz; tar -zxvf m.sh.gz;

     

    yea, 

    sudo ./rploader.sh satamap now gives me 64/0004, it seems its reading the pci driver as a 4 port instead of 8

    ill try peter suh's script right now

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    1 minute ago, phone guy said:

    Sorry to hear that.... ok, lets assume your sata is ahci? so you shouldn't need drivers for that. I am also assuming your drives have data on them you want to save, and adding 4 more drives... so, when you rebuild, same serial and mac will not force any formatting or anything, it will be just like a power cycle.  What build (model) are you using? if you change that you will have to migrate from (for example) 918 to 3622 (or whatever), same model/serial/mac it wont.

     

    The drive error is most likely the sata mapping, if you have the old user config or grub you already know what it was, so you can at least get back to where you were yesterday, then we can figure out how to add the other sata ports.

     

    Dont worry! We will get you thru this!

    This article explains how the sataport mapping works, reading this is detailed, and it helps.

    https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/

    thnks.

    my biggest problem time was finding how to change the satamap setting. if you do it thru the loader by pressing 'e' , is not perssistent. if you do it by removing the usb stick and opening on the computer by editing the grub file, file gets corrupted, if you do it by rebuilding the loader, you got the infamous (drive 3,4.... disable error).

     

    i know that my setting should be 68 / 0004.

    my onboard sata on my H81 Motherboard, has port 3,4 as ghost drives, so I get port 1,2,5,6 as fisical drives, on the pci side I get my other 8 ports.

     

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    27 minutes ago, phone guy said:

    Did you try ./rploader.sh restoreloader now command? what exactly are you trying to restore? rebuilding usb loader is fairly easy which you already know. Keep same serial and mac and version and on reboot system will come back as normal.

     

    /home/tc/old you will see your user_config.json (if you did backup command) which should have serial and mac

    you can move with mv command or copy with cp command, obviously with from/to syntax ;)

    Or if nothing else use winscp on windows or portx on mac then you get explorer gui and can move and copy with drag and drop

    this is what happened....

    I got some new HDD (4TB IronWolfs x4) and switched my 4 PORT SATA PCI to a 8 PORT. to have a todal of 12 drives in my rig.

    I tried to update the GRUB, but ended up updating the dam system with ./rploader.sh fullupgrade now...( iknow, i know... I wasnt paying attention)

    so I lost the boot setting for the loader, so I tried taking the files manually from the backup folder and pasting on the home folder, only to see it being copied as TC and not ROOT user (I suck at WinSCP). so after changing every single file from tc to root... rploader.sh was not working anymore, I gave up and im trying to do everything from scratch again. and guess what...... error... drive 3,4 bla bla bla... is back, now I have to read all the posts back to see what is wrong.

    I wrote down the procedures on how to do this, and I followed to the latter, but I believe something changed, because if I dont get the "Installation failed, file corrupted" error I get the  install loop error.

    We really need a WIKI for this, Im willing to help making one!!!!

    • Sad 1

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted · Edited by Jizar Stoffel

    21 minutes ago, MajkelP said:

    I think I found correct settings for my test build. 

    I have got in total 6 disks, (3 HDD and 3 SSDs)

    2 HDDs I connected to SATA1 and SATA2 ports on my motherboard, (still I have two empty ports) 

    3 SSDs and 1 HDD I connected to my SAS controller. 

     

    I edited grub.cfg file

     

    SataPortMap 48 and  DiskIdxMap 0005

     

    and after reboot I can see that everything seems to be in order. 

     

     

     

    Diskmap02.thumb.PNG.a0e9fd21bd58641f99b26fff45f33f89.PNGDiskmap01.thumb.PNG.104d2ae09188e82a107ba7d302e6efe0.PNG
     

    The only minor problem is with (I think) SAS cable, Each individual disk cable has got own label form P1-P4.  
    I am not quite sure why disk which is connected to P1 (I assume should be first) but is 3rd in my Storage Manager.
    Instead Drive 5 - SK hynix SH920 (connected to P4) I would expect Samsung 860 Evo (connected to P1) 

    Similar situation is with Toshiba MQ001ABF050 and Crucial. 

    Everything is swapped. 
    I am not quite sure if this is big deal, or maybe controller recognizes disks in own order rather than cable labels. 

     

      

    disks order.JPG

    This post helped me understand much about SMP and DIM

    https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/

     

    try sata_remap=2>4:3>5

    or sata_remap=2>4:4>2:3>5:5>3

    • Like 2

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    15 hours ago, Hong Kong said:

    Hello,

    I downloaded and burn tinycore-redpill.v0.4.6 to my USB drive and boot it to my HP Microserver Gen 8 with 4 disks. However, I cannot make it work.

    Commands shown below.

     

    My questions:

    1. My system is using Intel(R) Celeron(R) CPU G1610T @ 2.30GHz with 2GB RAM. Is the DS3615xs / bromolow-7.0.1-42218 a good choice?
    2. There is no modules.alias.3.json.gz  modules.alias.4.json.gz  latestrploader.sh on my drive. Is it normal?
    3. There are SSL certificate problem: certificate is not yet valid errors. Are they expected?
    4. Do I need the pciid 8086d00001c02 and pciid 102bd00000533 extensions? If yes, how can I locate and include them?

    Many thanks!

     

    tc@box:~$ sudo ./rploader.sh update now

    Checking Internet Access -> OK

    Checking if a newer version exists on the repo -> gzip: modules.alias.3.json.gz: No such file or directory

    gzip: modules.alias.4.json.gz: No such file or directory

    sha256sum: latestrploader.sh: No such file or directory

    There is a newer version of the script on the repo should we use that ? [yY/nN]Y

    OK, updating, please re-run after updating

    cp: cannot stat '/home/tc/latestrploader.sh': No such file or directory

    Updating tinycore loader with latest updates

    Backing up files to /mnt/sde3//mydata.tgz

    Done.

    tc@box:~$

    tc@box:~$ sudo ./rploader.sh serialgen DS3615xs now

    Serial Number for Model : 1330LWN027197

    Mac Address for Model DS3615xs : 00:11:32:C4:8A:21

    Should i update the user_config.json with these values ? [Yy/Nn]

    Y

    tc@box:~$

    tc@box:~$ sudo ./rploader.sh satamap now

    HBA: 00:1f.2 Disks : 6

    SataPortMap=6

    DiskIdxMap=00

    Should i update the user_config.json with these values ? [Yy/Nn]

    Y

    tc@box:~$

    tc@box:~$ sudo ./rploader.sh identifyusb now

    Found USB SanDisk SerialNumber: 00003615093021102742

    Vendor ID : 0x0781 Product ID : 0x5583

    Should i update the user_config.json with these values ? [Yy/Nn]

    Y

    tc@box:~$

    tc@box:~$ sudo ./rploader.sh build bromolow-7.0.1-42218 now

    Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop

    Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master

    Extensions :

    Extensions URL :

    TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download

    TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd

    SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download

    SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed

    COMPILE_METHOD : toolkit_dev

    TARGET_PLATFORM       : bromolow

    TARGET_VERSION    : 7.0.1

    TARGET_REVISION : 42218

    REDPILL_LKM_MAKE_TARGET : dev-v7

    KERNEL_MAJOR : 3

    MODULE_ALIAS_FILE= modules.alias.3.json

    Checking Internet Access -> OK

    Checking if a newer version exists on the repo -> gzip: modules.alias.3.json.gz: No such file or directory

    gzip: modules.alias.4.json.gz: No such file or directory

    sha256sum: latestrploader.sh: No such file or directory

    There is a newer version of the script on the repo should we use that ? [yY/nN]Y

    OK, updating, please re-run after updating

    cp: cannot stat '/home/tc/latestrploader.sh': No such file or directory

    Updating tinycore loader with latest updates

    Backing up files to /mnt/sde3//mydata.tgz

    Done.

    tc@box:~$

    tc@box:~$ sudo ./rploader.sh ext bromolow-7.0.1-42218 auto

    Loader source : https://github.com/jumkey/redpill-load.git Loader Branch : develop

    Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master

    Extensions :

    Extensions URL :

    TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download

    TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd

    SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/bromolow-source/linux-3.10.x.txz/download

    SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed

    COMPILE_METHOD : toolkit_dev

    TARGET_PLATFORM       : bromolow

    TARGET_VERSION    : 7.0.1

    TARGET_REVISION : 42218

    REDPILL_LKM_MAKE_TARGET : dev-v7

    KERNEL_MAJOR : 3

    MODULE_ALIAS_FILE= modules.alias.3.json

    Checking Internet Access -> OK

    Cloning into 'redpill-lkm'...

    fatal: unable to access 'https://github.com/RedPill-TTG/redpill-lkm.git/': SSL certificate problem: certificate is not yet valid

    Cloning into 'redpill-load'...

    fatal: unable to access 'https://github.com/jumkey/redpill-load.git/': SSL certificate problem: certificate is not yet valid

    Testing modules.alias.3.json -> File OK

    ------------------------------------------------------------------------------------------------

    It looks that you will need the following modules :

     

     

    Found SATA Controller : pciid 8086d00001c02  Required Extension :

    No matching extension

    Found VGA Controller : pciid 102bd00000533  Required Extension :

    No matching extension

    Found Ethernet Interface : pciid 14e4d0000165f Required Extension : tg3.ko

    Searching for matching extension for tg3.ko

    Found Ethernet Interface : pciid 14e4d0000165f Required Extension : tg3.ko

    Searching for matching extension for tg3.ko

    ------------------------------------------------------------------------------------------------

    tc@box:~$

     

     

    Trying to build on another box (Older Dell Duo core) so my kids can play around with it, and I'm getting this same errors.

    it seems the sites are down or a chance in the code on how to acess it?

    any help would be apreciated 

    ps: I have a sucessully installed and updated I7 machine running DS3266xs+ with DSM 7.1.

    Second Nic Not Seen - TinyCoreRedPill

    in Developer Discussion Room

    Posted

    hey, I was in the same boat as you, and this issue seems to be the boogie man, because every time someone asks about, it gets completly ignore...

    This is how I solved my problem... it was so simple but people complicate it so much I almost gave up.

     

    in my case I upgraded my 6.2.4 to Redpill tinycore loader 7.0.1. Ended up loosing all my files, but good thing I have backups.

    after that I started from Scratch. Burned a new USB drive. did all the Instructed procedures, just to end up with the reboot/restore loop. was trying to install DS3617xs.

    Then I tried DS3615xs and kept getting the drives errors (3,4 disable bla bla bla). 

    Finally decided to go with DS3622xs+ did all the instructed procedures. but.... and here is the simple thing....

    when it was time to install the ext. the links I was trying was wrong.

    In my case I need to install the r8125 ext for my NICGIGA NIC-2.5G.

    if you (like me) follow the instruction, you are suppose to enter the command: 

    sudo ./rploader.sh ext broadwellnk-7.0.1-42218 auto 

    or 

    sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add (and the link of the ext)

     

    but if you go to https://github.com/pocopico/rp-ext and try to copy the ext link from there, you will get errors.

    in my case i was trying:

    https://github.com/pocopico/rp-ext/tree/main/r8152

    or 

    https://github.com/pocopico/rp-ext/blob/main/r8152/rpext-index.json

    or 

    https://github.com/pocopico/4.4.180plus-broadwellnk/blob/main/r8125.ko

    etc....

    none of them worked, what finally worked for me was to open the file at https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json and get the link from inside the file.  

    sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json

    image.thumb.png.41768072862fc223bdf35bfbee591ec3.png

     

    after that I follow the rest of the instructions and it finally got all my NIC to work.

    here is what I did from Start:  

    Broadwellnk - DS3622xs+    Intel Xeon D-1531    Six Core    12    Yes    Broadwellnk    DDR4 ECC SODIMM 16 GB

sudo ./rploader.sh update now
sudo ./rploader.sh serialgen DS3622xs+ now
sudo ./rploader.sh satamap now
sudo ./rploader.sh identifyusb now
sudo ./rploader.sh ext broadwellnk-7.0.1-42218 auto 
sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json
sudo ./rploader.sh build broadwellnk-7.0.1-42218
sudo ./rploader.sh backup now
sudo reboot

Update to latest DSM. at first reboot. boot into TC Loader and run:

sudo ./rploader.sh update now
sudo ./rploader.sh backuploader now
sudo ./rploader.sh download broadwellnk-7.0.1-42218
sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://github.com/jumkey/redpill-load/raw/develop/redpill-misc/rpext-index.json
sudo ./rploader.sh postupdate broadwellnk-7.0.1-42218
sudo reboot

     

    Hope this helps you and anyone else having this problem. if you need more help, let me know which driver you are trying to install and ill try to help.

    • Like 2

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    3 hours ago, Jizar Stoffel said:

    also, here is an current output of dmesg:

      

    
[    5.096701] ax88179_178a 3-6:2.1 eth3: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, ba:eb:90:44:37:e9
[    5.096795] usbcore: registered new interface driver ax88179_178a
[    5.096914] usbcore: registered new interface driver cdc_ncm
[    5.097505] usbcore: registered new interface driver cdc_mbim
[    6.131474] usb 3-6: USB disconnect, device number 5
[    6.131548] ax88179_178a 3-6:2.0 eth2: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet
[    6.150278] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19
[    6.150281] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0001: -19
[    6.150283] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19
[    6.150364] ax88179_178a 3-6:2.1 eth3: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet
[    6.170288] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19
[    6.170292] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0001: -19
[    6.170294] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19
[    6.926934] usb 3-6: new high-speed USB device number 6 using xhci_hcd
[    7.403743] loop: module loaded
[    7.406337] zram0: detected capacity change from 0 to 4143759360
[    7.407214] random: mkswap: uninitialized urandom read (16 bytes read)
[    7.440278] Adding 4046636k swap on /dev/zram0.  Priority:-2 extents:1 across:4046636k SSFS
[    7.450499] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.451794] process '/sbin/ldconfig' started with executable stack
[    7.460969] random: crng init done
[    7.839025] ax88179_178a 3-6:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
[    8.149615] ax88179_178a 3-6:1.0 eth2: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, f8:e4:3b:53:b6:88
[   24.573633] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8106e-1.fw failed with error -2
[   24.573636] r8169 0000:03:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8106e-1.fw
[   24.574288] r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8106e-1.fw (-11)
[   24.574583] RTL8208 Fast Ethernet r8169-300:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   24.741334] r8169 0000:03:00.0 eth0: Link is Down
[   25.577639] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2
[   25.577642] r8169 0000:04:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8125b-2.fw
[   25.578491] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-11)
[   25.603601] RTL8226B_RTL8221B 2.5Gbps PHY r8169-400:00: attached PHY driver [RTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[   25.723747] r8169 0000:04:00.0 eth1: Link is Down
[   26.611909] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   27.140632] ax88179_178a 3-6:1.0 eth2: Failed to read reg index 0x0040: -32
[   27.596267] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1
[   29.772356] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1


     

    Further progress... I was able to add TG3 extensions. after that I tried adding my specific needed driver and got this error. 

    tc@box:~$ sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json
jq: error (at <stdin>:1): Cannot iterate over null (null)
jq: error (at <stdin>:1): Cannot iterate over null (null)
Rploader Version : 0.6.0.8
Loader source : https://github.com/dogodefi/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/dogodefi/redpill-lkm.git : Redpill module branch : develop
Extensions :
Extensions URL :
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download
TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download
SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : broadwellnk
TARGET_VERSION    : 7.0.1
TARGET_REVISION : 42218
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 4
MODULE_ALIAS_FILE= modules.alias.4.json
Checking Internet Access -> OK
Redpill sources already downloaded, pulling latest
Already up to date.
Loader sources already downloaded, pulling latest
Already up to date.
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
#=O#-   #     #

[-] JSON file "/home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json" is invalid:

parse error: Invalid numeric literal at line 7, column 10
[-] Extension loaded from https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json (id: ) is invalid: index JSON file is unparsable. Please report that to the extension maintainer via help URL
[!] The index file for https://github.com/pocopico/rp-ext/blob/main/r8125/rpext-index.json extension is invalid - please report that to the extension maintainer

*** Process will exit ***


     

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    21 minutes ago, Jizar Stoffel said:

    Hey guys, I took the day to try to make this work. Now that DSM 7 is updated to the latest version, maybe it will be easier. and I know there are other with the same problem.

    Here it goes:

    I'm trying to make my 2nd NIC to work. either be the PCI 2.5GBe or USB 1Gbe.

    It seems that both modules and Drivers are installed after following @pocopico instructions.

    My USB NIC works on TinyCore menu, because it let me ssh into it if I umplug the onboard NIC cable. It is seen by DSM interface under Control panel > General, but is does not load as a LAN2.

    My PCI NIC seems to be installed but it also does not load as LAN2, on this one, there is no light activity when CAT6 or CAT7 cables are connected to it. I tried different cable and got same results. 

    I tried adding the modules as instructed by @pocopico. but I might be doing something wrong. Im sure it is something simple that I just dont know the "howto" to make it work.

    Can anyone help me out with this?

    here are some outputs:

     

     

    NIC.jpg

     

    ps... My config is as follows: 

    
{
  "extra_cmdline": {
    "pid": "0x1666",
    "vid": "0x0951",
    "sn": "************",
    "mac1": "************1",
    "mac2": "************2",
    "mac3": "************3",
    "SataPortMap": "64",
    "DiskIdxMap": "0004",
    "netif_num": "3"
  },
  "synoinfo": {

          "internalportcfg" : "0xffff",
          "maxdisks" : "8",
          "support_bde_internal_10g" : "no",
          "support_disk_compatibility" : "no",
          "support_memory_compatibility" : "no"


},
  "ramdisk_copy": {

    
}

}


     

    also, here is an current output of dmesg:

      

    [    5.096701] ax88179_178a 3-6:2.1 eth3: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, ba:eb:90:44:37:e9
[    5.096795] usbcore: registered new interface driver ax88179_178a
[    5.096914] usbcore: registered new interface driver cdc_ncm
[    5.097505] usbcore: registered new interface driver cdc_mbim
[    6.131474] usb 3-6: USB disconnect, device number 5
[    6.131548] ax88179_178a 3-6:2.0 eth2: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet
[    6.150278] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19
[    6.150281] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0001: -19
[    6.150283] ax88179_178a 3-6:2.0 eth2 (unregistered): Failed to write reg index 0x0002: -19
[    6.150364] ax88179_178a 3-6:2.1 eth3: unregister 'ax88179_178a' usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet
[    6.170288] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19
[    6.170292] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0001: -19
[    6.170294] ax88179_178a 3-6:2.1 eth3 (unregistered): Failed to write reg index 0x0002: -19
[    6.926934] usb 3-6: new high-speed USB device number 6 using xhci_hcd
[    7.403743] loop: module loaded
[    7.406337] zram0: detected capacity change from 0 to 4143759360
[    7.407214] random: mkswap: uninitialized urandom read (16 bytes read)
[    7.440278] Adding 4046636k swap on /dev/zram0.  Priority:-2 extents:1 across:4046636k SSFS
[    7.450499] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.451794] process '/sbin/ldconfig' started with executable stack
[    7.460969] random: crng init done
[    7.839025] ax88179_178a 3-6:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
[    8.149615] ax88179_178a 3-6:1.0 eth2: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, f8:e4:3b:53:b6:88
[   24.573633] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8106e-1.fw failed with error -2
[   24.573636] r8169 0000:03:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8106e-1.fw
[   24.574288] r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8106e-1.fw (-11)
[   24.574583] RTL8208 Fast Ethernet r8169-300:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   24.741334] r8169 0000:03:00.0 eth0: Link is Down
[   25.577639] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2
[   25.577642] r8169 0000:04:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8125b-2.fw
[   25.578491] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-11)
[   25.603601] RTL8226B_RTL8221B 2.5Gbps PHY r8169-400:00: attached PHY driver [RTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[   25.723747] r8169 0000:04:00.0 eth1: Link is Down
[   26.611909] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   27.140632] ax88179_178a 3-6:1.0 eth2: Failed to read reg index 0x0040: -32
[   27.596267] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1
[   29.772356] ax88179_178a 3-6:1.0 eth2: ax88179 - Link status is: 1


     

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted · Edited by Jizar Stoffel
    adding config info

    Hey guys, I took the day to try to make this work. Now that DSM 7 is updated to the latest version, maybe it will be easier. and I know there are other with the same problem.

    Here it goes:

    I'm trying to make my 2nd NIC to work. either be the PCI 2.5GBe or USB 1Gbe.

    It seems that both modules and Drivers are installed after following @pocopico instructions.

    My USB NIC works on TinyCore menu, because it let me ssh into it if I umplug the onboard NIC cable. It is seen by DSM interface under Control panel > General, but is does not load as a LAN2.

    My PCI NIC seems to be installed but it also does not load as LAN2, on this one, there is no light activity when CAT6 or CAT7 cables are connected to it. I tried different cable and got same results. 

    I tried adding the modules as instructed by @pocopico. but I might be doing something wrong. Im sure it is something simple that I just dont know the "howto" to make it work.

    Can anyone help me out with this?

    here are some outputs:

     

     

    NIC.jpg

     

    ps... My config is as follows: 

    {
  "extra_cmdline": {
    "pid": "0x1666",
    "vid": "0x0951",
    "sn": "************",
    "mac1": "************1",
    "mac2": "************2",
    "mac3": "************3",
    "SataPortMap": "64",
    "DiskIdxMap": "0004",
    "netif_num": "3"
  },
  "synoinfo": {

          "internalportcfg" : "0xffff",
          "maxdisks" : "8",
          "support_bde_internal_10g" : "no",
          "support_disk_compatibility" : "no",
          "support_memory_compatibility" : "no"


},
  "ramdisk_copy": {

    
}

}


     

×
×
  • Create New...