eszerfrm
-
Posts
7 -
Joined
-
Last visited
Posts posted by eszerfrm
-
-
On 4/29/2020 at 12:43 PM, IG-88 said:
here is one positive report
maybe try loader 1.04b, mod it with the rd.gz and zImage from DSM_DS918+_25423.pat (DSM 6.2.3, use 7zip to extract the files) and also copy the extra/extra2 0.10 (overwrite old files)
https://xpenology.com/forum/topic/28321-driver-extension-jun-104b-for-dsm623-for-918/
Dear IG-88:
Here is log file I use serial port output,
and there is no other message.....
-
21 hours ago, IG-88 said:
log is switched to serial port
https://xpenology.com/forum/topic/9394-installation-faq/?tab=comments#comment-81097
without informatin about loader you use and what hardware (cpu, board) ...
most likely not a driver problem
so read faq and maybe this
https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/
Thanks for your reply
I use GA-J1900N-D3V, it is onboard CPU J1900 (BayTrail) with Dual LAN RTL 8111F
Last time all 0.13b loader(3 differnt, std... syno... recov...) changed driver fail, and I have tried 918+ and 3617 one, that means I've tried different loader with differint driver patch at least 9 files, I don't event know what type would works...
Later I will try recovery 0.13b one again, use 3617 version (change two 3617 file from pat file 24922 version by hand) and try add driver, too (that means I'll try 3 differnt bootloader). If it still doesn't work, I will try to see serial port message......(I don't have RS232 to USB line yet) -
7 hours ago, IG-88 said:
participating here is part of the fun
but it will be discussed here (open) so we all can learn from it
information about the hardware and a complete dmesg log would be useful
8111f is just the normal realtek
It's the problem,
I can boot in to the happy hacking screen,
but I can't find my machine in "find.synology.com"
I've edit the grub.cfg, set extra_args = 'debug loglevel=15'but I cant see any log message on the screen
the NIC is dual Lan... not single Lan.... so I've set netif_num=2
I hope I can use demsg, but I don't know how to use it without boot in... -
Hi IG-88,
is there any error message or log file I can see and report to you?there are reports from other forum...
It seems don't support RTL 8111F dual Lan or something else problem there...?
-
8 hours ago, IG-88 said:
more likely another problem then nic
what loader and type (there are three)
if 1.04b/918+ what extra/extra2 type did you use (there are three, syno, std, recovery)
did you also copy the new zImage and rd.gz to the loader?
I use 1.04b/918+ with both extra/extra2 type and syno, std, recovery fail....
also 3617 one but i forget detail, that one tried too many loader, all fail....
And yet, I've tried copy new zImage and rd.gz to loader
By the way, onboard Lan is Realtek 8111F-VL, it got 2 Lan port from pcie lane
-
HI IG-88,
I got a problem with GA-J1900N-D3V motherboard...
Which can success boot to the happy hacking screen, but it can't be found in "find.synology.com"......I use Intel PCI Lan card instead (8391GT PRO/1000 Lan card with 82541PI controller) but same problem......
If you need futher information or detail spec I can reply it, thank you.
Driver extension jun 1.03b/1.04b for DSM6.2.2 for 3615xs / 3617xs / 918+
in Additional Compiled Modules
Posted · Edited by eszerfrm
EDIT:
I forget add "debug" feature.... it ganna no message
And it get work at bootloader 1.04b with 918+_25426.pat
changed files... drivers...(with your newest file extra918plus_v0.11)
it just work, I don't know why.....
log2.txt