wanye
-
Posts
18 -
Joined
-
Last visited
Posts posted by wanye
-
-
heres the output from hp smart storage admin
QuoteADU Version 2.10.14.0
Diagnostic Module Version 8.1.13.0
Time Generated Saturday September 09, 2023 1:29:11PMDevice Summary:
Smart Array P222 in slot 1Consolidated Error Report:
Report for Smart Array P222 in slot 1
-------------------------------------Smart Array P222 in slot 1 : Identify Controller
Configured Logical Drives 0 (0x00)
Configuration Signature 0xa374be20
RAM Firmware Revision 8.32
ROM Firmware Revision 8.32
Hardware Revision 0x01
Boot Block Revision 1.90
Drive Present Map 0x00000000
External Drive Map 0x00000000
Board ID 0x3350103c
Swapped Cable Flags 0x00
Non Disk Map 0x00000000
Bad Host RAM Addr 0x00
CPU Revision 0x28
PDPI Revision 0x00
EPIC Revision 0x00
WCXC Revision 0x00
Marketing Revision B
Controller Flags 0x8c
Position Controller Flag Status
-------- ------------------------------------------------------------------------------------------------------------------------------------------------------ -------------
2 Firmware has been upgraded to support capacity expansion operations that require more than 65535 sectors (32 MiB) to be relocated per expand iteration Informational
3 Firmware supports 15 drives per SCSI bus Informational
7 Firmware supports the new big drive assignment maps (128 bits) as well as the big physical drive numbering (0x80+) InformationalHost Flags 0x02
Expand Disable Code 0x00
Protocol Chip Count 0x01
Maximum Blocks 65535 (0x0000ffff)
Controller Clock 0x00003f35
Drives Per Bus 0 (0x00)
Big Drive Present Map 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Position Device Status
-------- ------------------------------------ -------------
0 Physical Drive (10 TB SATA HDD) 2I:1 InformationalBig External Drive Map All Zeroes (16 x [0x00])
Big Non Disk Map All Zeroes (16 x [0x00])
Task Flags 0x0100
Busses For ICL 0 (0x00)
Supported Controller Modes 0x00
Current Controller Mode Not Redundant (0x00)
Controller Status 0x00
Position Controller Status Status
-------- ----------------- -------------
0 Location External InformationalRedundant Failure Reason 0x00
Unsupported NILE Busses 0x00
Host I2C Autorev 0x07
CPLD Revision 0x0c
Fibre Chip Count 0 (0x00)
Daughterboard Type 0x00
More Swapped Cable Flags 0x00
License Key Status 0x08
Position License Key Status Status
-------- --------------------------- -------------
3 License Keys Supported True Informational
2 No Keys Stored InformationalAccess Module Status 0x07
ADG Support 0xc1
Features Supported 0xff 0xfc 0x00 0x00 0xfd 0x03 0x00 0x01 0x00 0x00 0x00
ROM Inactive Revision 8.32
Active ROM Status 0x00
PPC to PCI Bridge Status 0x00
Redundant Server Info 0x00000000
Percent Write Cache 0% (0x00)
Cache Size In MiB 512 MiB (0x0200)
Cache Battery Count 1 (0x01)
Total Controller Memory Size 0x0200
More Controller Flags 0xf8
Position Controller Flag Status
-------- ----------------------------------------------------------------------------------- -------------
3 Firmware supports deferred code load drive firmware updates Informational
4 Firmware supports basic splitting and resyncing of mirrored volumes Informational
5 Controller implements SAS changes documented in the firmware spec Informational
6 Controller supports variable-length extended physical drive map and drive numbering Informational
7 Firmware supports greater than 2TB logical volumes InformationalXBoard Host I2C Autorev 0x00
Battery PIC Revision 0x32
DDFF Version 0202
Maximum Logical Devices Supported 64 (0x0040)
Extended Logical Unit Count 0 (0x0000)
Maximum Physical Devices Supported 384 (0x0180)
Maximum Physical Drives Per Logical Unit 128 (0x0080)
Enclosure Count 0 (0x00)
Expander Count 0 (0x00)
Offset To Extended Drive Present Map 290 (0x0122)
Offset To Extended External Drive Map 338 (0x0152)
Offset To Extended Non Disk Map 386 (0x0182)
Internal Port Status 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
External Port Status 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Yet More Controller Flags 0xfa57a216
Position Controller Flag Status
-------- -------------------------------------------- -------------
1 This is a SAS controller that supports OBDR Informational
2 Reorder logical drive operation is supported Informational
4 Multiple Parity Groups Supported Informational
9 Ncq Supported Informational
13 PHY-to-PHY map is supported Informational
15 Sat Pass Through Read Supported Informational
16 Sat Pass Through Write Supported Informational
17 Multi Domain Supported Informational
18 Sas Zoning Supported Informational
20 Fixed Fields Length Supported Informational
22 Sense Expansion Ability Supported Informational
25 Hba Mode Supported Informational
27 Cache Config Flags Supported Informational
28 Boot Volume Supported Informational
29 Periodic Sampling Supported Informational
30 Step Internal Option Rom Supported Informational
31 Flash Backed Write Cache Supported InformationalLast Lockup 0x00
PCI Slot 1 (0x01)
Firmware Build Number 0x0000
Maximum Safe Full Stripe Size MiB 12 MiB (0x0000000c)
Total Structure Length 482 (0x000001e2)
Vendor ID HP
Product ID P222
Extended Last Lockup 0x00000000
Maximum RAID01 Stripe Size 0xffff
Maximum RAID45 Stripe Size 0x0800
Maximum RAID6 Stripe Size 0x0800
Yet More Swapped Cable Flags 0x0000
Maximum Device Paths 0x04
Offset To Zoned In Drive Map 0 (0x0000)
Fixed Structure Length 290 (0x00000122)
Firmware Compile Time Stamp Sep 12 2017 17:18:30
Even More Controller Flags 0x20c7d630
Position Controller Flag Status
-------- ---------------------------------------------- -------------
16 Rapid Parity Initialization Supported Informational
17 Io Bypass Function Supported Informational
18 Roaming Spares Supported Informational
22 Rsync Rollback Supported Informational
23 Enhanced Rapid Parity Initialization Supported Informational
29 Rapid Rebuild Supported InformationalHost Initialization Code 0x0220
Orca Image Size 0x0000
Option ROM Version empty
Option ROM Build 0x0000
Encryption Status 0x00000000
Extra Controller Flags 0x00000004
Position Extra Controller Flags Status
-------- ---------------------- -------------
2 Opo Supported InformationalPCIE Generation 0x01
PCIE Width 0x00
Controller Mode 0x00
Extended Drive Present Map 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Position Device Status
-------- ------------------------------------ -------------
0 Physical Drive (10 TB SATA HDD) 2I:1 InformationalExtended External Drive Map All Zeroes (48 x [0x00])
Extended Non Disk Map 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10
Position Device Status
-------- ----------------------- -------------
380 SEP (PMCSIERA SRCv8x6G) Informational
Smart Array P222 in slot 1 : Cache Config StatusCache Disabled Map 0x00000000
Read Cache Size 0 (0x0000)
Write Cache Size 0 (0x0000)
Disable Flag Disabled (0x01)
Offset To Extended Cache Disabled Map 0 (0x0000)
Offset To Extended Cache Failure Map 0 (0x0000)
Offset To Extended Read Cache Disabled Map 0 (0x0000)
Cache Configuration Flags 0x00
Total Structure Length 280 (0x00000118)
Maximum Logical Devices Supported 64 (0x0040)
Offset To Extended Write Cache Disabled Map 0 (0x0000)
Fixed Structure Length 256 (0x00000100)
Cache Flags 0x00010000
Position Cache Flag Status
-------- ---------------------------------- -------------
16 Flash Backed Cache Module Attached InformationalCache Disable Code 0x0000
Total Cache Memory Size 304 MiB (0x0130)
Battery Count 1 (0x0001)
Battery Status 0x0001
Parity Read Errors 0 (0x0000)
Parity Write Errors 0 (0x0000)
Error Log All Zeroes (160 x [0x00])
Failed Batteries 0 (0x0000)
Board Present 0x01
Cache Failure Map 0x00000000
Max Error Log Entries 12 (0x0c)
NVRAM Load Status 0x00
Memory Size Shift Factor 10 (0x0a)
Non Battery Backed Memory Size 0 (0x0000)
Memory State 0x00
Cache Auto Rev 0x32
Total Controller Memory Size 512 MiB (0x0200)
Percent Read Cache 0% (0x00)
Percent Write Cache 0% (0x00)
Default Percent Read Cache 25% (0x19)
Default Percent Write Cache 75% (0x4b)
Installed Batteries 0x0001
Cache Support Flags 0x1c
Reserved2 0x00
Detailed Battery Status All Zeroes (16 x [0x00])
Detailed Flashlight Hardware Status 0x11 0x01 0x10 0x00 0x01 0x00 0x00 0x00
Extended Cache Disabled Map 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00Smart Array P222 in slot 1 : Controller Parameters
LED Flag 0x00
Command List Verification 0x00
Backed Out Write Drives 0 (0x00)
Parity Stripes 0x0000
Controller Configuration Flags 0x00
Position Controller Configuration Flag Status
-------- ------------------------------------------ -------------
2 Inconsistency Repair Policy Disabled Informational
3 Degraded Performance Optimization Disabled InformationalQueue Depth 0xffff
Elevator Trend 0x0032
Elevator State Enabled (0x00)
Force Scan Complete 0x00
Forced Transfer Mode Automatic Detection (0x00)
Forced Transfer Width Automatic Detection (0x00)
Rebuild Priority Rapid High (0x00)
Expand Priority Medium (0x00)
Host Sdb ASIC Fix 0x00
PDPI Burst Disabled 0x00
Software Name empty
Hardware Name empty
Bridge Revision 0x00
Snapshot Priority 0x00
OS Specific 0x00000000
POST Prompt Timeout 0x00
Automatic Drive Slamming 0x00
Position Automatic Drive Slamming Status
-------- ------------------------ -------------
0 Disabled InformationalDevice Path Selection Method Automatic (0x00)
NVRAM Flags 0x0c
Cache NVRAM Flags 0x00
Drive Configuration Flags 0x00
Position Drive Configuration Flag Status
-------- ---------------------------------------------------- -------------
0 Drive Write Cache Disabled Informational
2 Skip Never Accessed Regions During Expansion Enabled Informational
3 Skip Never Accessed Regions During Rebuild Enabled InformationalOver Temperature Warning 0x00
Over Temperature Shutdown 0x00
Over Temperature Condition Cancelled 0x00
Max Coalesce Commands 1 (0x01)
Max Coalesce Delay 0 microseconds (0x00000000)
ORCA Password empty
Access ID empty
Primary Boot LUN empty
Secondary Boot LUN empty
Total Structure Length 204 (0x000000cc)
RAM Drive Number 0x0000
RAM Drive Size In Mi B 0x0000
More Config Flags 0x00000000
More NVRAM Flags 0x00000000
Elevator Latency Setting 0x00Smart Array P222 in slot 1 : Maintenance Operation
Duration 0 second(s) (0x00000000)
Elapsed 0 second(s) (0x00000000)
Maintenance Flags All Zeroes (256 x [0x00])
Offset To Extended Maintenance Flags 276 (0x0114)
Maximum Physical Devices Supported 384 (0x0180)
Total Structure Length 660 (0x00000294)
Fixed Structure Length 276 (0x00000114)
Extended Maintenance Flags All Zeroes (384 x [0x00])Smart Array P222 in slot 1 : MNP Status
Current Drive 0x0000
Timer Remaining 0 minute(s) (0x0000)
MNP Delay 0 minute(s) (0x0000)Smart Array P222 in slot 1 : SubSystem Parameters
Controller Slot Number 0 (0x00)
Chassis Serial Number CZ154600EW
Port Name 5001438035799640 (0x50 0x01 0x43 0x80 0x35 0x79 0x96 0x40)
Controller Serial Number PDSXH0BRH8T1TY
Cache Serial Number PCMBH0BRH7H0EM
Linked Port Name 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Linked Controller Serial Number empty
Linked Cache Serial Number empty
System Board Serial Number empty
Power Backplane Serial Number empty
SCSI Drive Backplane Serial Number empty
Fan Module Serial Number empty
Power Supply 0 Serial Number empty
Power Supply 1 Serial Number empty
Power Bay Fan Module Serial Number empty
Fibre Daughter Board Serial Number empty
Node Name empty
Drive Backplane 1 Serial Number empty
Fan Module 1 Serial Number empty
Internal Port Count 1 (0x01)
External Port Count 1 (0x01)
Internal Port Info Index Controller Phy Map Physical Port
----- ------------------ -------------
0 0x000000000000000f 2I
1 0x0000000000000000 empty
2 0x0000000000000000 empty
3 0x0000000000000000 empty
4 0x0000000000000000 empty
5 0x0000000000000000 empty
6 0x0000000000000000 empty
7 0x0000000000000000 emptyExternal Port Info Index Controller Phy Map Physical Port
----- ------------------ -------------
0 0x00000000000000f0 1E
1 0x0000000000000000 empty
2 0x0000000000000000 empty
3 0x0000000000000000 empty
4 0x0000000000000000 empty
5 0x0000000000000000 empty
6 0x0000000000000000 empty
7 0x0000000000000000 emptyProduct ID empty
Total Structure Length 1260 (0x000004ec)
Additional Internal Port Info Index SAS Address
----- ----------------------------------------------------------
0 5001438035799640 (0x50 0x01 0x43 0x80 0x35 0x79 0x96 0x40)
1 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
2 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
3 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
4 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
5 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
6 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
7 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)Additional External Port Info Index SAS Address
----- ----------------------------------------------------------
0 5001438035799644 (0x50 0x01 0x43 0x80 0x35 0x79 0x96 0x44)
1 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
2 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
3 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
4 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
5 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
6 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
7 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)Controller Temperature 0x57
Cache Module Temperature 0x22
Supercap Temperature 0x1c
HBA Firmware Version All Zeroes (16 x [0x00])
HBA Mode Option ROM Version All Zeroes (16 x [0x00])
Cache Module Data Width 0x0020
Cache Module Xfer Rate 0x0535
Cable Info Cable State Vendor Part Number Vendor Revision Vendor Serial Number Cable Length
----------- ------------------------ --------------- ------------------------ ------------
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
0x00000000 All Zeroes (16 x [0x00]) 0x00 0x00 All Zeroes (16 x [0x00]) 0x0000
Smart Array P222 in slot 1 : Surface StatusCurrent Drive 0x0000
Current Head All Zeroes (32 x [0x00])
Current Cylinder All Zeroes (32 x [0x0000])
Timer Remaining 0 second(s) (0x0000)
Surface Delay 0 second(s) (0x0000)
Current Block All Zeroes (32 x [0x00000000])
Surface Analysis Status 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Inconsistent Block All Zeroes (8 x [0x00000000])
Surface Analysis Pass Time All Zeroes (32 x [0x00000000])
Surface Analysis Pass Count All Zeroes (32 x [0x00000000])
Controller Resets All Zeroes (32 x [0x0000])
Blocks Reassigned All Zeroes (32 x [0x00000000])
Big Current Block All Zeroes (128 x [0x00000000])
Big Surface Analysis Status All Zeroes (32 x [0x00])
Big Inconsistent Block All Zeroes (32 x [0x00000000])
Current Volume 0xffff
Initialization Percentage Complete 0% (0x00)
Offset To Extended Surface Analysis Status 0 (0x00000000)
Offset To Extended Surface Analysis Pass Time 0 (0x00000000)
Offset To Extended Surface Analysis Pass Count 0 (0x00000000)
Offset To Extended Controller Resets 0 (0x00000000)
Offset To Extended Blocks Reassigned 0 (0x00000000)
Offset To Extended Inconsistent Block 0 (0x00000000)
Offset To Extended Current Block 0 (0x00000000)
Total Structure Length 7842 (0x00001ea2)
Maximum Logical Devices Supported 64 (0x0040)
Maximum Physical Devices Supported 384 (0x0180)
Fixed Structure Length 1442 (0x000005a2)
Offset To Volume Parity Inconsistencies Repaired 0 (0x00000000)
Offset To Drive Parity Inconsistencies Repaired 0 (0x00000000)
Offset To Extended Initialization Percent Complete 0 (0x00000000)
Max Parallel Scan Limit 0x00
Current Parallel Scan Limit 0x00
Extended Surface Analysis Status All Zeroes (64 x [0x0000])
Extended Surface Analysis Pass Time All Zeroes (64 x [0x00000000])
Extended Surface Analysis Pass Count All Zeroes (64 x [0x00000000])
Extended Controller Resets All Zeroes (32 x [0x00000000])
Extended Blocks Reassigned All Zeroes (64 x [0x00000000])
Extended Inconsistent Block All Zeroes (64 x [0x0000000000000000])
Extended Current Block 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0xffff000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x1ea2000000000000 0x05a2018000400000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000Smart Array P222 in slot 1 : Sense Expansion Ability
Support Flags 0x0000001f
Position Support Flag Status
-------- -------------------------------------- -------------
0 Volume Expansion Supported Informational
1 Stripe Size Migration Supported Informational
2 Raid Level Migration Supported Informational
3 Logical Drive Extension Supported Informational
4 Expansion Memory Size Field Applicable InformationalExpansion Memory Size 303 MiB (0x0004bf10)
Transformation Capability Status 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
Offset To Extended Transformation Capability Status 52 (0x0034)
Maximum Logical Devices Supported 64 (0x0040)
Total Structure Length 116 (0x00000074)
Fixed Structure Length 52 (0x00000034)
Extended Transformation Capability Status 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01Smart Array P222 in slot 1 : Sense Erase Progress
Offset To Physical Drive Erase State 28 (0x0000001c)
Offset To Logical Drive Erase State 796 (0x0000031c)
Maximum Physical Devices Supported 384 (0x0180)
Maximum Logical Devices Supported 64 (0x0040)
Total Structure Length 924 (0x0000039c)
Fixed Structure Length 28 (0x0000001c)
Support Flags 0x00
Option Flags 0x00
Physical Drive Erase State All Zeroes (384 x [0x0000])
Logical Drive Erase State All Zeroes (64 x [0x0000])Smart Array P222 in slot 1 : VPD Page 80 - Serial Number
Product Serial Number PDSXH0BRH8T1TY
Smart Array P222 in slot 1 : VPD Page 83 - Array Information
Array Code Set Identifier Type Association Identifier Length Identifier
-------- --------------- ----------- ----------------- -------------------------------------------------------------------------------
0x02 0x00 0x00 0x10 0x50 0x44 0x53 0x58 0x48 0x30 0x42 0x52 0x48 0x38 0x54 0x31 0x54 0x59 0x00 0x00
0x01 0x00 0x00 0x04 0x00 0x00 0x00 0x00
Smart Array P222 in slot 1 : Controller NVRAMGPIO Flag 0x00
Board ID 0x3350103c
Global Configuration Signature 0xa374be20
Configuration Signature 1 0xa374be20 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000
Error Log Trap Address High Or Post Results Lockup Reason Or Post Error RIS Updates Or Post Error Detail Firmware Version Trap Address Low
--------------------------------- --------------------------- -------------------------------- ---------------- ----------------
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000
0x0000 0x0000 0x00000000 0x0000 0x0000Memory State 0x00
Bridge Revision 0x00
NVRAM Flags 0x0c
Current Host Serial Number CZ154600EW
Incarnation Number 0x0006
Previous Host Serial Number 1 CZ3541HLC2
Previous Host Serial Number 2 CN&6190AKn
Previous Host Serial Number 3 USE623N1ZQ
Access ID empty
Last Lockup 0x00
PCI Slot 1 (0x01)
SAS Phy Settings All Zeroes (8 x [0x00000000])
Phy Settings Valid 0x00
Phy Enable 0x00
CLP Flags 0x00
WWID Number 0007000000000000 (0x00 0x07 0x00 0x00 0x00 0x00 0x00 0x00)
Configuration Signature 2 All Zeroes (32 x [0x00000000])
License Keys Key RTC Install Date
----- ----------------
empty 0x00000000
empty 0x00000000
empty 0x00000000
empty 0x00000000
empty 0x00000000
empty 0x00000000
empty 0x00000000
empty 0x00000000Checksum 1 0x0000
Checksum 2 0x5200
NVRAM Raw Hex Dump 00 00 3c 10 50 33 20 be 74 a3 20 be 74 a3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 0c 43 5a 31 35 34 36 30 30 45 57 00 00 00 00 00 00 06 00 43 5a 33 35 34 31 48 4c 43
32 00 00 00 00 00 00 43 4e 26 36 31 39 30 41 4b 6e 00 00 00 00 00 00 55 53 45 36 32 33 4e 31 5a 51 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 30 f9 b5 00 00 00 00
00 f0 f8 b5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 52 00 31 3c 10 50 33 20 be 74 a3 20 be 74 a3 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 43 5a 31 35 34 36 30 30 45 57 00
00 00 00 00 00 06 00 43 5a 33 35 34 31 48 4c 43 32 00 00 00 00 00 00 43 4e 26 36 31 39 30 41 4b 6e 00 00 00 00 00 00 55
53 45 36 32 33 4e 31 5a 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 20 30 f9 b5 00 00 00 00 00 f0 f8 b5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 52Smart Array P222 in slot 1 : License Key Records
List Length 0x0000
Record Feature Name License Key Key TLE Hardware Serial Number Hardware Series Key Entry Date Firmware Status Key Status
------------ ----------- ------------------------ ---------------------- --------------- -------------- --------------- ----------
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
empty empty All Zeroes (36 x [0x00]) empty empty 0x00000000 0x00 0x0000
Smart Array P222 in slot 1 : Created By Data
Smart Array P222 in slot 1 : SEP (PMCSIERA SRCv8x6G) : Physical Drive StatusSCSI Bus 23 (0x17)
SCSIID 12 (0x0c)
Block Size 0 Bytes Per Block (0x0000)
Total Blocks 0 GB (0x00000000)
Reserved Blocks 0x00010000
Drive Model PMCSIERASRCv8x6G
Drive Serial Number empty
Drive Firmware Revision RevB
SCSI Inquiry Bits 0x02
Compaq Drive Stamped Not Stamped For Monitoring (0x00)
Last Failure Reason No Failure (0x00)
Device Flags 0x02
Position Device Flag Status
-------- ----------------------- -------------
1 Non Disk Device Present InformationalMore Device Flags 0x00
Position Device Flag Status
-------- -------------------------------------- -------------
0 SMART Predictive Failure Not Supported Informational
4 Device Attached To Internal Connector InformationalSCSI Lun 0x00
Yet More Device Flags 0x20
Position Device Flag Status
-------- -------------------------------------- -------
5 Does Not Support Redundant Controllers WarningEven More Device Flags 0x10
Position Device Flag Status
-------- --------------------------- -------------
4 PHY To PHY Map Is Supported InformationalSpi Speed Rules 0x00000000
Physical Port empty
Physical Box 0 (0x00)
Physical Bay 0 (0x00)
RPM 0 RPM (0x00000000)
Device Type SEP (0x06)
SATA Version 0x00
Big Total Block Count 0x0000000000000000
RIS Starting LBA 0x0000000000000800
RIS Size 160 KiB (0x00000140)
WWID 500143803579964f (0x50 0x01 0x43 0x80 0x35 0x79 0x96 0x4f 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
Controller PHY Map 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
PHY Count 1 (0x0001)
PHY Connected Device Type 0x07 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
PHY To Drive Bay Number All Zeroes (256 x [0x00])
PHY To Attached Device Index 0xfffe 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000
Box Index 255 (0xff)
MSA Support 0x00
Extra Device Flags 0x0000
Negotiated Link Rate All Zeroes (256 x [0x00])
Phy To Phy Map All Zeroes (256 x [0x00])
Redundant Path Present Map 0x01
Redundant Path Failure Map 0x00
Active Path Number 0x00
Multi Path Port 1 1E
Multi Path Port 2 empty
Multi Path Port 3 empty
Multi Path Port 4 empty
Multi Path Port 5 empty
Multi Path Port 6 empty
Multi Path Port 7 empty
Multi Path Port 8 empty
Multi Path Box 1 0x00
Multi Path Box 2 0x00
Multi Path Box 3 0x00
Multi Path Box 4 0x00
Multi Path Box 5 0x00
Multi Path Box 6 0x00
Multi Path Box 7 0x00
Multi Path Box 8 0x00
Multi LUN Device LUN Count 0x01
Minimum Good Firmware Revision empty
Vendor Unique Inquiry Bytes All Zeroes (20 x [0x00])
Current Temperature 0xff
Temperature Threshold 0x00
Maximum Temperature 0x00
Logical Blocks Per Physical Block 0x00
Current Q Depth Limit 0x0001
Switch Name All Zeroes (10 x [0x00])
Switch Port 0x0000
Alternate Paths Switch Name All Zeroes (40 x [0x00])
Alternate Paths Switch Port 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Power On Hours 0x0000
Percent Endurance Used 0x0000
Drive Authentication 0x00
Smart Carrier Authentication 0x00
Smart Carrier Application Version 0x00
Smart Carrier Bootloader Version 0x00
Sanititze Erase Support 0x00
Encryption Flags 0x00
Encryption Key Name empty
Misc Drive Flags 0x00Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : Physical Drive Status
SCSI Bus 0 (0x00)
SCSIID 0 (0x00)
Block Size 512 Bytes Per Block (0x0200)
Total Blocks 2.1 TB (0xffffffff)
Reserved Blocks 0x00010000
Drive Model ATA WDC WD100EZAZ-11
Drive Serial Number JEK6T8EZ
Drive Firmware Revision 83.H0A83
SCSI Inquiry Bits 0x02
Compaq Drive Stamped Stamped For Monitoring (0x01)
Last Failure Reason No Failure (0x00)
Device Flags 0x01
Position Device Flag Status
-------- ----------------------------- -------------
0 Drive Present And Operational InformationalMore Device Flags 0x85
Position Device Flag Status
-------- -------------------------------------- -------------
0 SMART Predictive Failure Supported Informational
2 SMART Predictive Failure Is Enabled Informational
4 Device Attached To Internal Connector Informational
7 Write Cache Enabled In Saved Mode Page InformationalSCSI Lun 0x00
Yet More Device Flags 0xa0
Position Device Flag Status
-------- --------------------------------------- -------------
5 Does Not Support Redundant Controllers Warning
7 Drive Write Cache Setting Is Changeable InformationalEven More Device Flags 0xd0
Position Device Flag Status
-------- --------------------------- -------------
4 PHY To PHY Map Is Supported Informational
6 Ncq Capable Informational
7 Ncq Enabled InformationalSpi Speed Rules 0x00000000
Physical Port 2I
Physical Box 0 (0x00)
Physical Bay 1 (0x01)
RPM 5400 RPM (0x00001518)
Device Type SATA (0x01)
SATA Version 0x00
Big Total Block Count 0x000000048c400000
RIS Starting LBA 0x000000048c3f0800
RIS Size 160 KiB (0x00000140)
WWID 3001438035799640 (0x30 0x01 0x43 0x80 0x35 0x79 0x96 0x40 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00)
Controller PHY Map 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
PHY Count 1 (0x0001)
PHY Connected Device Type 0x07 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
PHY To Drive Bay Number All Zeroes (256 x [0x00])
PHY To Attached Device Index 0xfffe 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000
Box Index 255 (0xff)
MSA Support 0x00
Extra Device Flags 0x0000
Negotiated Link Rate 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Phy To Phy Map All Zeroes (256 x [0x00])
Redundant Path Present Map 0x01
Redundant Path Failure Map 0x00
Active Path Number 0x00
Multi Path Port 1 2I
Multi Path Port 2 empty
Multi Path Port 3 empty
Multi Path Port 4 empty
Multi Path Port 5 empty
Multi Path Port 6 empty
Multi Path Port 7 empty
Multi Path Port 8 empty
Multi Path Box 1 0x00
Multi Path Box 2 0x00
Multi Path Box 3 0x00
Multi Path Box 4 0x00
Multi Path Box 5 0x00
Multi Path Box 6 0x00
Multi Path Box 7 0x00
Multi Path Box 8 0x00
Multi LUN Device LUN Count 0x00
Minimum Good Firmware Revision empty
Vendor Unique Inquiry Bytes All Zeroes (20 x [0x00])
Current Temperature 0x23
Temperature Threshold 0x37
Maximum Temperature 0x29
Logical Blocks Per Physical Block 0x03
Current Q Depth Limit 0x0010
Switch Name All Zeroes (10 x [0x00])
Switch Port 0x0000
Alternate Paths Switch Name All Zeroes (40 x [0x00])
Alternate Paths Switch Port 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Power On Hours 0x6344
Percent Endurance Used 0x0000
Drive Authentication 0x80
Smart Carrier Authentication 0x00
Smart Carrier Application Version 0x00
Smart Carrier Bootloader Version 0x00
Sanititze Erase Support 0x00
Encryption Flags 0x00
Encryption Key Name HP_HDD_SATA__10000GB_05K_WDC_WD100EZAZ-11_JEK6T8EZ____________
Misc Drive Flags 0x00Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : Monitor and Performance Statistics (Since Factory)
Serial Number empty
Firmware Revision empty
Product Revision empty
Reference Time 0x00000002
Sectors Read 0x0000000000000a89
Read Errors Hard 0x00000000
Read Errors Retry Recovered 0x00000000
Read Errors ECC Corrected 0x0000000000000000
Sectors Written 0x0000000000000000
Write Errors Hard 0x00000000
Write Errors Retry Recovered 0x00000000
Seek Count 0xffffffffffffffff
Seek Errors 0xffffffffffffffff
Spin Cycles 0x00000000
Spin Up Time 0x0000
Performance Test 1 0x0000
Performance Test 2 0xffff
Performance Test 3 0xffff
Performance Test 4 0xffff
Reallocation Sectors 0xffffffff
Reallocated Sectors 0xffffffff
DRQ Time Outs 0xffff
Other Time Outs 0x0000
Drive Rebuild Count 0 (0x0000)
Spin Retries 65535 (0xffff)
Recovers Failed Read 0x0000
Recovers Failed Write 0x0000
Format Errors 0x0000
Self Test Failures 0xffff
Not Ready Failures 0x00000000
Remap Abort Failures 0xffffffff
IRQ Deglitch Count 4294967295 (0xffffffff)
Bus Faults 0x00000000
Hot Plug Count 0 (0x00000000)
Track Rewrite Errors 0xffff
Write Errors After Remap 0x0000
Background Firmware Revision 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Media Failures 0x0000
Hardware Errors 0x0000
Aborted Command Failures 0x0000
Spin Up Failures 0x0000
Bad Target Count 0 (0x0000)
Predictive Failure Errors 0x00000000Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : Monitor and Performance Statistics (Since Reset)
Serial Number empty
Firmware Revision empty
Product Revision empty
Reference Time 0x00000002
Sectors Read 0x0000000000000a89
Read Errors Hard 0x00000000
Read Errors Retry Recovered 0x00000000
Read Errors ECC Corrected 0x0000000000000000
Sectors Written 0x0000000000000000
Write Errors Hard 0x00000000
Write Errors Retry Recovered 0x00000000
Seek Count 0xffffffffffffffff
Seek Errors 0xffffffffffffffff
Spin Cycles 0x00000000
Spin Up Time 0x0000
Performance Test 1 0x0000
Performance Test 2 0xffff
Performance Test 3 0xffff
Performance Test 4 0xffff
Reallocation Sectors 0xffffffff
Reallocated Sectors 0xffffffff
DRQ Time Outs 0xffff
Other Time Outs 0x0000
Drive Rebuild Count 0 (0x0000)
Spin Retries 65535 (0xffff)
Recovers Failed Read 0x0000
Recovers Failed Write 0x0000
Format Errors 0x0000
Self Test Failures 0xffff
Not Ready Failures 0x00000000
Remap Abort Failures 0xffffffff
IRQ Deglitch Count 4294967295 (0xffffffff)
Bus Faults 0x00000000
Hot Plug Count 0 (0x00000000)
Track Rewrite Errors 0xffff
Write Errors After Remap 0x0000
Background Firmware Revision 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Media Failures 0x0000
Hardware Errors 0x0000
Aborted Command Failures 0x0000
Spin Up Failures 0x0000
Bad Target Count 0 (0x0000)
Predictive Failure Errors 0x00000000Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : Serial SCSI Physical Drive Error Log
Entry Size 20 (0x14)
Entry Count 64 (0x0040)
Next Entry Offset 0x05
Errors Logged 5 (0x00000005)
Physical Drive Error Log Entries Error Type SCSI Operation Code SCSI Status CAM Status Sense Key ASC ASCQ Block Valid Block Reference Time Additional Information
---------- ------------------- ----------- ---------- --------- ---- ---- ----------- ---------- -------------- ----------------------
0x01 0x00 0x02 0x04 0x06 0x29 0x00 0x00 0x00000000 0x64fc72d4 0x0000
0x02 0x03 0x00 0x22 0x00 0x00 0x00 0x00 0x00000000 0x64fc72d4 0x0000
0x01 0x85 0x02 0x04 0x0b 0x00 0x00 0x00 0x00000000 0x64fc72d4 0x0000
0x01 0x5a 0x02 0x04 0x05 0x24 0x00 0x00 0x00000000 0x64fc7318 0x0000
0x01 0x5a 0x02 0x04 0x05 0x24 0x00 0x00 0x00000000 0x64fc7328 0x0000Reference Time 0x00000002
Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : Mode Sense 10
Header 0x00 0x49 0x00 0x10 0x00 0x00 0x00 0x08 0xff 0xff 0xff 0xff 0x00 0x00 0x02 0x00
Mode Page Page Number Page Data
----------- ---------------------------------------------------------------------------------------------------
0x01 0x01 0x0a 0x80 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x08 0x08 0x12 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x0a 0x0a 0x0a 0x04 0x12 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff
0x1c 0x1c 0x0a 0x00 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x2e 0x2e 0x01 0x0a
Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : VPD Page 80 - Serial NumberProduct Serial Number JEK6T8EZ
Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : VPD Page 83 - Array Information
Array Code Set Identifier Type Association Identifier Length Identifier
-------- --------------- ----------- ----------------- ---------------------------------------
0x01 0x03 0x00 0x08 0x50 0x00 0xcc 0xa2 0x67 0xed 0x5b 0xda
Smart Array P222 in slot 1 : Physical Drive (10 TB SATA HDD) 2I:1 : Workload InformationPower-on Hours 25412
Total LBA Read 152259147248
Total LBA Written 92934664128
Workload Rating (TB/Yr) None Available
Month(s) of Operation 34.810959
Total Bytes Read (TB) 77.956683
Total Bytes Written (TB) 47.582548
Total Combined Read/Write Bytes (TB) 125.539231
Workload Rate (TB/Month) 3.606314
Projected Rate (TB/Year) 43.275762
SSD Usage Remaining (%) Not Applicable -
I just plugged it into the existing cable to the backplane. I've got 4 sata disks in there
-
so my psu blew on my gen8 microserver a couple of weeks ago. it took out the first two sata ports on the onboard controller as well (thanksfully not the backplane too!)
ive since bought a hp p222 controller and i'm trying to get it working. i have dsm6.2 on there currently, so need to upgrade to DSM7 to get the new card working
testing ARPL on a single spare drive to see how i get on, i chose DS3622xs+
compile the bootloader and reboot, im getting "no disks found"
i've disabled the onboard controller and set the p222 to the first available controller in bios.
checking dmesg on the arpl bootup, i see this:
[ 4.939842] HP HPSA Driver (v 3.4.20-200) [ 4.939854] hpsa 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.940768] hpsa 0000:07:00.0: Logical aborts not supported [ 4.940771] hpsa 0000:07:00.0: HP SSD Smart Path aborts not supported [ 4.956915] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address b0:5a:da:87:7f:24 [ 4.956921] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 4.956923] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 4.956924] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 4.967838] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address b0:5a:da:87:7f:25 [ 4.967842] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 4.967843] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 4.967845] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 4.977599] scsi host1: hpsa [ 4.977755] hpsa can't handle SMP requests [ 4.984042] hpsa 0000:07:00.0: scsi 1:0:0:0: added RAID HP P222 controller SSDSmartPathCap- En- Exp=1 [ 4.984046] hpsa 0000:07:00.0: scsi 1:0:1:0: added Direct-Access ATA WDC WD100EZAZ-11 PHYS DRV SSDSmartPathCap- En- Exp=1 [ 4.984049] hpsa 0000:07:00.0: scsi 1:0:2:0: masked Enclosure PMCSIERA SRCv8x6G enclosure SSDSmartPathCap- En- Exp=0 [ 4.984085] hpsa can't handle SMP requests [ 4.984172] scsi 1:0:0:0: RAID HP P222 8.32 PQ: 0 ANSI: 5 [ 4.984307] scsi 1:0:0:0: Attached scsi generic sg1 type 12 [ 4.984362] hpsa can't handle SMP requests [ 4.984757] scsi 1:0:1:0: Direct-Access ATA WDC WD100EZAZ-11 0A83 PQ: 0 ANSI: 6 [ 4.985938] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 4.986829] sd 1:0:1:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 4.986834] sd 1:0:1:0: [sdb] 4096-byte physical blocks [ 4.987018] sd 1:0:1:0: [sdb] Write Protect is off [ 4.987021] sd 1:0:1:0: [sdb] Mode Sense: 46 00 10 08 [ 4.987378] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.077006] sdb: sdb1 sdb2 sdb5 sdb6 [ 5.078518] sd 1:0:1:0: [sdb] Attached SCSI disk [ 5.355690] udevadm (168) used greatest stack depth: 14056 bytes left [ 5.366430] ip (198) used greatest stack depth: 13832 bytes left [ 5.378070] NET: Registered PF_INET6 protocol family [ 5.378514] Segment Routing with IPv6 [ 5.378519] In-situ OAM (IOAM) with IPv6 [ 5.394258] 8021q: 802.1Q VLAN Support v1.8 [ 6.511541] random: crng init done [ 6.511543] random: 7 urandom warning(s) missed due to ratelimiting [ 7.601324] blkid (256) used greatest stack depth: 13680 bytes left [ 8.157687] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null). Quota mode: none. [ 8.222490] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 8.525665] ip (352) used greatest stack depth: 13656 bytes left [ 9.004682] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 9.004687] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX [ 9.004688] tg3 0000:03:00.0 eth0: EEE is disabled [ 9.004709] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.114327] tg3 0000:03:00.1 eth1: Link is up at 1000 Mbps, full duplex [ 9.114332] tg3 0000:03:00.1 eth1: Flow control is on for TX and on for RX [ 9.114333] tg3 0000:03:00.1 eth1: EEE is disabled [ 9.114341] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 11.513738] udevd (158) used greatest stack depth: 13176 bytes left
i cant work out what i need to set sataportmap to so i can see the drives on the p222. can someone explain how i translate above output?
once i've got this working, im gonna try upgrading my dsm6 setup and putting the 4 SHR drives back in. any tips on the best process to follow to do this so i dont break the array and/or lose my data? (my theory is use arpl to upgrade to 7.0.1 and then to a later version?)
-
i blew one of the sata ports on my gen8 motherboard when the psu blew a couple of weeks ago
after chatting to @WiteWulf i bought a hp p222 controller (you also need the cache board and battery for it to work, so dont just buy the bare card) off ebay for around £25 (£10 for the card, £15 for the cache/battery)
currently struggling with getting it setup (upgraded to dsm7) but WW has his all working nicely, although bear in mind the card runs HOT so hopefully your microserver is kept somewhere the extra fan noise isnt going to bother you
HTH
- 1
-
disk scrubbing completed (took 23 hours for 4 drives in an 18tb SHR array) and shutdown completed. all working fine now.
i'd say my question is resolved. thanks for your help!
the only issue i'm having now is occasional buffering from the SMB share on the box to my firetv/kodi machine (firetv2 with wired network connection) only seems to happen randomly, but still annoying. got iperf3 installed and tested, that seems fine......
QuoteWaynes-Mac-mini:bin wanye$ iperf3 -c 192.168.1.253
Connecting to host 192.168.1.253, port 5201
[ 4] local 192.168.1.66 port 63261 connected to 192.168.1.253 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 114 MBytes 954 Mbits/sec
[ 4] 1.00-2.00 sec 112 MBytes 941 Mbits/sec
[ 4] 2.00-3.00 sec 112 MBytes 940 Mbits/sec
[ 4] 3.00-4.00 sec 112 MBytes 940 Mbits/sec
[ 4] 4.00-5.00 sec 112 MBytes 940 Mbits/sec
[ 4] 5.00-6.00 sec 112 MBytes 941 Mbits/sec
[ 4] 6.00-7.00 sec 112 MBytes 940 Mbits/sec
[ 4] 7.00-8.00 sec 112 MBytes 940 Mbits/sec
[ 4] 8.00-9.00 sec 112 MBytes 940 Mbits/sec
[ 4] 9.00-10.00 sec 112 MBytes 940 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec sender
[ 4] 0.00-10.00 sec 1.09 GBytes 941 Mbits/sec receiver
iperf Done.
Waynes-Mac-mini:bin wanye$
could be the firetv though (i recently upgraded the version of kodi after a few other issues with it) so i'm going to stick the lid back on and put it back in the comms cab. everything else can be done remotely now
-
ok, so i upgraded the BIOS and ilo firmware on it. that took *much* longer than it should have! why dont HP provide OS-agnostic ISO files for creating a bootable usb, or providing the bios binary as a standalone file, rather than one embedded in a windows exe or RHEL rpm? i use a mac and a raspberry pi, so had to dig out an old laptop and put windows on, just to get at the files i need!
(i also forked out for an ilo licence so i can access the remote console, so the server can go back down in the comms cab rather than under my desk with a monitor/keyboard plugged in)
anyway. all sorted and updated. i created a new boot image, and copied extra.lzma plus zImage and rd.gz off the 24922.pat file onto the stick. booted up, and the old NICs are now working so i assume the modded extras.lzma has done its job
havent tried rebooting yet, as i'm waiting for disk scrubbing to complete, will update once thats completed and i've tried to shutdown and/or reboot
-
the only oops in dmesg is SMP. i didnt copy and additional drivers. im just using ds3615_6.2/synoboot.img... so which files do you suggest i copy onto it? is it just a matter of copying the file(s) and then booting off the sd card? it's all a little confusing...
root@microserver:/var/log# more synopoweroff.log
2020-04-09T05:01:16-07:00 DiskStation synoupgrade_SYNO.Core.Upgrade_1_start[17135]: system_poweroff_pre_hook.c:17 synopoweroff: Begin SYNOPowerOffPreHook action.
2020-04-09T05:01:17-07:00 DiskStation synoupgrade_SYNO.Core.Upgrade_1_start[17135]: system_poweroff_pre_hook.c:22 synopoweroff: Finish SYNOPowerOffPreHook action.
2020-04-09T05:01:17-07:00 DiskStation synoupgrade_SYNO.Core.Upgrade_1_start[17135]: system_sys_init.c:95 synopoweroff: System is going to reboot
2020-04-09T13:56:32+01:00 microserver synoscgi_SYNO.Core.System_1_shutdown[32364]: system_poweroff_pre_hook.c:17 synopoweroff: Begin SYNOPowerOffPreHook action.
2020-04-09T13:56:32+01:00 microserver synoscgi_SYNO.Core.System_1_shutdown[32364]: system_poweroff_pre_hook.c:22 synopoweroff: Finish SYNOPowerOffPreHook action.
2020-04-09T13:56:32+01:00 microserver synoscgi_SYNO.Core.System_1_shutdown[32364]: system_sys_init.c:95 synopoweroff: System is going to poweroff
root@microserver:/var/log# grep -i oops dmesg
[Thu Apr 9 05:16:08 2020] Oops: 0002 [#1] SMP
[Thu Apr 9 14:02:06 2020] Oops: 0002 [#1] SMP
-
ok, back up and running mostly! heres how in case anyone else has a similar problem in future.....
to "fix" i flash my boot microsd card with jun's 6.2 loader for DS3615xs - v1.03b and downloaded DSM_DS3615xs_24922.pat off the synology firmware site
booted, pressed C when the grub boot menu appeared and set vid/pid/sn (a new generated one from https://xpenogen.github.io/serial_generator/index.html )/mac1/mac2 and booted the second (recovery) option.
after a few mins, it was detectable in synology assistant (and the find.synology.com site)... from there i was able to choose REINSTALLATION from the select install type menu. i then pointed it manually at the 24922 pat file. it formatted system partitions, then copied the contents of the PAT file. after around 10 mins i wasnt able to connect.
at this point i discovered the server wouldnt properly shut down/reboot, so i had to power it off/on manually. it used to work ok with the original install, any idea whats changed, or what i need to do to sort that out?
after the reboot, the server appeared again in synology assistant, and i was able to connect and set it back up from scratch. i'm now going through and trying to remember how i had things configured (i only backed up a couple of apps configs. doh!)
so yeah. i'm back up. thanks! but if anyone knows why it isnt shutting down/rebooting, that would be useful, i dont want to have to go into the basement comms cab each time i need to reboot it
its a hp microserver gen8 and it worked ok on 5.2, and i've not changed any bios settings or anything. when SSHing onto it, even a sudo shutdown -h now just kills the ssh connection, and i have to manually power it off.
cheers
-
thanks. tried disabling ipv6 there and still getting the same errors in /var/log/nginx/error.log
heres everything after changing ipv6init=off for eth-/eth1 and rebooting. its exactly the same errors i was getting previously...
2020/04/01 23:26:44 [emerg] 12223#12223: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/04/01 23:26:44 [emerg] 12318#12318: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/04/01 23:26:44 [notice] 12326#12326: signal process started
2020/04/01 23:26:44 [error] 12326#12326: invalid PID number "" in "/run/nginx.pid"
so. do you think i should attempt to "upgrade" to 6.1 to resolve things? i don't mind if theres an easy way, its just that the posts i read here mentioned i needed to drop in a different HDD to set it up on initially, and that seemed like far too fiddly a task, and preserving the data in the array is the most important thing here (its not just tv shows, its my main home server) - unfortunately i don't have enough spare storage to hand to back up everything i need and start it all from scratch again.
also, theres definitely some screwy permissions too, apps can no longer read/write to /volume1/ so i think i need to restore access to the apps. but without DSM, its hard working out what apps are running as what. i can access the SMB shares using the admin credentials. previously it was set up for guest read-only (and apps that access it read/write)
drwxrwx---+ 17 root users 4096 Mar 25 12:59 downloads
inside there
drwxrwxrwx+ 404 admin users 36864 Apr 1 16:44 TV
inside TV there seems to be a mixture of 3 users that have write access
drwxrwx---+ 4 admin users 4096 Dec 12 2016 TV show 1
drwxrwx---+ 3 svc-nzbdrone users 4096 Aug 13 2019 TV show 2
drwxrwx---+ 4 100 users 4096 Nov 1 2016 TV Show 3
-
5 hours ago, bearcat said:
@wanye I might be wrong, as my new glasses are in quarentine, but I sptted this line from your log
" request: "GET /webman/index.cgi HTTP/1.1", upstream: "scgi://unix:/run/synoscgi.sock:", host: "192.168.1.253:5000"""
Is your service trying to run on the same default port as your DSM interface?
That will crash... (I guess)
the way i read that was me trying to access DSM from my web browser. the full entry is:
2020/03/31 15:06:24 [error] 29330#29330: *1 upstream prematurely closed connection while reading response header from upstream, client: 192.168.1.66, server: _, request: "GET /webman/index.cgi HTTP/1.1", upstream: "scgi://unix:/run/synoscgi.sock:", host: "192.168.1.253:5000"
(from memory) this was after i edited the nginx.conf to remove the ipv6 listener entries, then manually ran nginx (and it loaded a standard nginx page not found error. i assumed this was because scemd wasnt running?)
14 hours ago, IG-88 said:@wanye
are you sure you need the few things you got from updating, you might just use the 2nd option in the loader and do a fresh install, your raid/data partitons should not be effected, this step would on do a fresh install of dsm on the system partition(s)
it might be much less time consuming to redo the ip address and user/group, shares configuration, the plugins would be needing reinstalling new versions anyway even if ou could use the updated dsm
you also need diferent drivers when using 6.2.2, the loader 1.03b has drivers that will fail in a lot of cases with 6.2.2 as the "original" drivers from jun a made for 6.2.0 and synology made some kernel config changes with 6.2.2
i was going from 5.2, half of the packages i run wouldnt update on it anymore. it hadnt been updated since i built the box 5 years ago!
the original plan was to go to 6.1 (IIRC) and leave it there, but instead of clicking the manual install button to upload the relevant PAT file, i clicked next accidentally, and it connected to the web and grabbed the latest version (6.2.2) which then disabled my onboard NICs. after fiddling with various posts on here trying to roll it back and/or get it working, i ordered an intel NIC.
fitted that, and now i have the nginx/scemd not starting issue, which seems to be related to ipv6 entries. which, if DSM was working, i could probably figure out how to disable it, but from an ssh prompt on an unfamiliar linux box? i'm not so comfortable....
-
so i found 4 copies of nginx.conf on the filesystem
root@DiskStation:/var/log/nginx# find / -xdev -name nginx.conf -print
/usr/share/init/nginx.conf
/etc.defaults/syslog-ng/patterndb.d/nginx.conf
/etc/syslog-ng/patterndb.d/nginx.conf
/etc/nginx/nginx.conf
/usr/share/init/nginx.conf is a script. is it this and/or apparmour that is doing this?
description "Nginx" author "Development Infrastructure Team" console log reload signal SIGHUP start on runlevel 1 and syno.share.ready and syno.network.ready and (started apparmor or stopped apparmor) stop on runlevel [06] nice -10 oom score -999 expect fork respawn respawn limit 5 10 pre-start script SZD_LOCAL_NGINX="/usr/local/etc/nginx" SZD_LOCAL_CONF_D="$SZD_LOCAL_NGINX/conf.d" SZD_LOCAL_SITES_ENABLED="$SZD_LOCAL_NGINX/sites-enabled" SZD_NGINX_TMP="/var/tmp/nginx" SZF_NGINX_UPSTART_ARG="/var/tmp/nginx/nginx-upstart-argument" MakeDirectory() { local path="$1" local mode="$2" local owner="$3" [ ! -d "$path" ] && /bin/mkdir -p "$path" || true /usr/bin/chmod "$mode" "$path" || true /usr/bin/chown "$owner" "$path" || true } /usr/bin/rm -rf /var/services/tmp/nginx || true MakeDirectory /var/services/tmp/nginx 700 http:root /usr/bin/rm -rf /var/lib/nginx || true /bin/ln -s /var/services/tmp/nginx /var/lib/nginx || true MakeDirectory /var/log/nginx 750 http:root MakeDirectory $SZD_LOCAL_CONF_D 755 root:root MakeDirectory $SZD_LOCAL_SITES_ENABLED 755 root:root MakeDirectory $SZD_NGINX_TMP 755 root:root /usr/syno/bin/mkcert > /dev/null 2>&1 /usr/syno/bin/cgi-keygen > /dev/null 2>&1 & for numbits in 2048 1024; do pem="/usr/syno/etc/ssl/dh${numbits}.pem" pem_default="/usr/syno/etc.defaults/ssl/dh${numbits}.pem" [ ! -e $pem ] && /usr/bin/cp -fp $pem_default $pem done /usr/bin/rm -f "$SZF_NGINX_UPSTART_ARG" /usr/bin/touch "$SZF_NGINX_UPSTART_ARG" /usr/bin/chmod 600 "$SZF_NGINX_UPSTART_ARG" /usr/bin/touch $SZD_LOCAL_CONF_D/{main,events}.conf || true if ! /usr/syno/bin/synow3tool --deploy-init; then /usr/bin/echo "startArg=\"-c /etc.defaults/nginx/nginx.conf.default\"" > "$SZF_NGINX_UPSTART_ARG" fi end script script . /var/tmp/nginx/nginx-upstart-argument exec /usr/bin/nginx $startArg -g 'pid /run/nginx.pid; daemon on; master_process on;' end script post-start script /usr/bin/rm -f /var/tmp/nginx/nginx-upstart-argument end script post-stop script /usr/bin/echo "Stop Nginx Server ......" [ -f /run/nginx.pid ] && /usr/bin/nginx -g 'pid /run/nginx.pid;' -s quit || true /bin/rm -f /etc/avahi/services/dsminfo.service end script ~
-
am i reading this right?
https://github.com/andy928/xpenology/blob/master/Documentation/networking/ipv6.txt
edit /etc/modules.conf and add a line:
disable_ipv6 1
current content of the file is:module_pfe_args_comcerto2k="lro_mode=1 tx_qos=0 burnin_mode=0"
-
i was, yes. i deleted .xpenoboot a few days ago though!
root@DiskStation:/volume1# cd ~
root@DiskStation:~# ls -alh
total 20K
drwx------ 2 root root 4.0K Mar 30 18:31 .
drwxr-xr-x 22 root root 4.0K Mar 31 14:07 ..
-rw-r--r-- 1 root root 1.1K Mar 31 2019 .profile
-rw------- 1 root root 1.7K Mar 30 18:31 .viminfo
-rw-r--r-- 1 root root 267 Mar 30 14:31 .wget-hsts
root@DiskStation:~# sudo rm -r .xpenoboot
rm: cannot remove ‘.xpenoboot’: No such file or directory
*edit*
heres what happens when i try to run nginx from the command line
nginx: [emerg] socket() [::]:5000 failed (97: Address family not supported by protocol)
root@DiskStation:~# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: [emerg] socket() [::]:5000 failed (97: Address family not supported by protocol)
nginx: configuration file /etc/nginx/nginx.conf test failed
so it looks like nginx was listening via ipv6 as well, which was screwing things up? i commented out the second LISTEN entry for each SERVER entry in nginx.conf and nginx started.
just rebooting now, will update with how it goes!
(its saying i sent too many forms when i try to make a new post, so having to do it via edits for now)
nginx and scemd are still failing on startup
/var/log/nginx/error.log entries since the reboot. looks like its uncommented out the ipv6 entries again
0/03/31 15:06:24 [error] 29330#29330: *1 upstream prematurely closed connection while reading response header from upstream, client: 192.168.1.66, server: _, request: "GET /webman/index.cgi HTTP/1.1", upstream: "scgi://unix:/run/synoscgi.sock:", host: "192.168.1.253:5000"
2020/03/31 15:11:23 [emerg] 12306#12306: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/03/31 15:11:23 [emerg] 12357#12357: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/03/31 15:11:23 [notice] 12368#12368: signal process started
2020/03/31 15:11:23 [error] 12368#12368: invalid PID number "" in "/run/nginx.pid"
example entry in nginx.conf:server {
listen 5000 default_server;
listen [::]:5000 default_server;
is there something i need to do to make a change permanent? or an easy CLI-way to disable ipv6 on nginx?
*edit*
still cant make a new post...
so i deleted the entries instead of commenting out, and tried to start nginx without rebooting. now getting invalid PID....
root@DiskStation:/var/log/nginx# synoservicecfg -start nginx
service [nginx] start failed, synoerr=[0x0000]
root@DiskStation:/var/log/nginx# tail /var/log/nginx/error.log
2020/03/31 15:04:56 [emerg] 29024#29024: socket() [::]:80 failed (97: Address family not supported by protocol)
2020/03/31 15:06:24 [error] 29330#29330: *1 upstream prematurely closed connection while reading response header from upstream, client: 192.168.1.66, server: _, request: "GET /webman/index.cgi HTTP/1.1", upstream: "scgi://unix:/run/synoscgi.sock:", host: "192.168.1.253:5000"
2020/03/31 15:11:23 [emerg] 12306#12306: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/03/31 15:11:23 [emerg] 12357#12357: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/03/31 15:11:23 [notice] 12368#12368: signal process started
2020/03/31 15:11:23 [error] 12368#12368: invalid PID number "" in "/run/nginx.pid"
2020/03/31 15:28:15 [emerg] 19356#19356: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/03/31 15:28:15 [emerg] 19364#19364: socket() [::]:5000 failed (97: Address family not supported by protocol)
2020/03/31 15:28:15 [notice] 19369#19369: signal process started
2020/03/31 15:28:15 [error] 19369#19369: invalid PID number "" in "/run/nginx.pid"
tried deleting /run/nginx/pid but still get the error.... all the ipv6 listener entries are back in the config again, so i guess it refreshes the config every time it starts? how do i disable ipv6 in nginx via CLI?
-
ok, i found the files in the PAT file, extracted them, copied to my box. then made sure permissions were ok - "chmod u-w /lib/libsynopkg.so.1 /lib/libsynoshare.so.6"
scemd and nginx still arent running. i think (hope) ive included all the info asked for by Polanskiman in the original thread. i may be reading things wrong due to how SHR is set up, but am i missing 2 HDDs? there should be 4... 2*10tb and 2*5tb disks with ~18tb storage in the array
service [scemd] status=[error]
required upstart job:
[scemd] is stop.
=======================================
service [nginx] status=[error]
required upstart job:
[nginx] is stop.
root@DiskStation:~# ls -ld /var /var/services /var/services/homes
drwxr-xr-x 17 root root 4096 Mar 31 14:07 /var
drwxr-xr-x 2 root root 4096 Mar 31 14:08 /var/services
lrwxrwxrwx+ 1 root root 14 Mar 31 14:08 /var/services/homes -> /volume1/homes
root@DiskStation:~# ps -ef | grep synoscgi
root 8924 1 0 14:07 ? 00:00:00 synoscgi
system 9052 8924 0 14:07 ? 00:00:00 synoscgi
system 9053 8924 0 14:07 ? 00:00:00 synoscgi
system 9054 8924 0 14:07 ? 00:00:00 synoscgi
system 9055 8924 0 14:07 ? 00:00:00 synoscgi
system 9056 8924 0 14:07 ? 00:00:00 synoscgi
root 16628 13956 0 14:13 pts/3 00:00:00 grep --color=auto synoscgi
root@DiskStation:~# synoscgi
Copyright (c) 2003-2019 Synology Inc. All rights reserved.
Usage: synoscgi (Version 24922)
--help: this help
--mode: scgi|apid (required) run as synoscgi or synoapid
scgi related params:
--idle-child={childNumber} (optional, default: 10) max idle child number
--max-child={childNumber} (optional, default: 65535) max child number
apid related params:
--conf (required) apid config realpath
root@DiskStation:~# fdisk -l Disk /dev/sda: 4.6 TiB, 5000981078016 bytes, 9767541168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: CCE935F3-151F-450E-8BEB-49BD19EE18DB Device Start End Sectors Size Type /dev/sda1 2048 4982527 4980480 2.4G Linux RAID /dev/sda2 4982528 9176831 4194304 2G Linux RAID /dev/sda5 9453280 9767334239 9757880960 4.6T Linux RAID Disk /dev/sdb: 4.6 TiB, 5000981078016 bytes, 9767541168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 566502CA-59F4-4F8C-92A9-4B9B6E33934C Device Start End Sectors Size Type /dev/sdb1 2048 4982527 4980480 2.4G Linux RAID /dev/sdb2 4982528 9176831 4194304 2G Linux RAID /dev/sdb5 9453280 9767334239 9757880960 4.6T Linux RAID Disk /dev/sdc: 9.1 TiB, 10000831348736 bytes, 19532873728 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 4278E253-78CD-4DC8-9849-A3EDDFE6089F Device Start End Sectors Size Type /dev/sdc1 2048 4982527 4980480 2.4G Linux RAID /dev/sdc2 4982528 9176831 4194304 2G Linux RAID /dev/sdc5 9453280 9767334239 9757880960 4.6T Linux RAID /dev/sdc6 9767350336 19532653311 9765302976 4.6T Linux RAID Disk /dev/sdd: 9.1 TiB, 10000831348736 bytes, 19532873728 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 2D27780F-C084-43FD-B9FB-0832E88F1CC7 Device Start End Sectors Size Type /dev/sdd1 2048 4982527 4980480 2.4G Linux RAID /dev/sdd2 4982528 9176831 4194304 2G Linux RAID /dev/sdd5 9453280 9767334239 9757880960 4.6T Linux RAID /dev/sdd6 9767350336 19532653311 9765302976 4.6T Linux RAID Disk /dev/md0: 2.4 GiB, 2549940224 bytes, 4980352 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/md1: 2 GiB, 2147418112 bytes, 4194176 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/md3: 4.6 TiB, 4999833911296 bytes, 9765300608 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/md2: 13.6 TiB, 14988101419008 bytes, 29273635584 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 65536 bytes / 196608 bytes Disk /dev/mapper/vg1000-lv: 18.2 TiB, 19987930546176 bytes, 39038926848 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 65536 bytes / 196608 bytes
root@DiskStation:~# ls -ld /var /var/services /var/services/homes
drwxr-xr-x 17 root root 4096 Mar 31 14:07 /var
drwxr-xr-x 2 root root 4096 Mar 31 14:08 /var/services
lrwxrwxrwx+ 1 root root 14 Mar 31 14:08 /var/services/homes -> /volume1/homes
-
after reading this:
i figured i should grab the PAT file for my box, and extract libsynopkg.so.1 and libsynoshare.so.6 and copy to /lib.... but when i extract the PAT file (im using keka on macos but have tried betterzip too) i cant see the files i need
the pat file im using is 6.2.2 for 3615xs - is that right?: https://archive.synology.com/download/DSM/release/6.2.2/24922/DSM_DS3615xs_24922.pat
-
ok, i have a bare metal gen8 microserver i accidentally upgraded from 5.2 to 6.2.2 (i didnt click manual install, so it grabbed the latest version and installed) and bricked it. fiddled with trying to roll it back and a few other bits, but nothing really worked.
anyway. an external NIC arrived today, and i've been wrestling with it all day. after setting up a new sd card with ds3615_6.2 synoboot.img, setting vid/pic/sn/mac1/mac2 in grub, starting in recovery mode. it then doesnt re-detect it after the recovery reboot.
it is now back to a stage where most things are loading (plex/etc) but DSM on port 5000 isnt loading, find.synology.com and the synology assistant are saying theres no devices found on my network.
i can ssh in and the packages seem ok, however i have an SHR array of 4 disks, and im getting errors in the apps saying 'missing folder', yet when i navigate to it in the ssh window, it all seems to be there, but as i cant get DSM to load, i'm having trouble making sure the array is ok.
scemd and/or nginx seem to be the culprits, right? (see services below)
anyway, some logfiles in case they are any help:
Spoiler/var/log/synoservice.log: 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [ftpd-ssl]. 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:33 synoservice: [ftpd-ssl] is not enabled, skip reload action 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [ftpd-ssl]. 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [ftpd-ssl]. 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:33 synoservice: [ftpd-ssl] is not enabled, skip reload action 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [ftpd-ssl]. 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_stop.c:23 synoservice: [synowifid] stopping ... 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_stop.c:38 synoservice: [synowifid] is already stopped. 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_stop.c:86 synoservice: [synowifid] stopped. 2020-03-30T16:52:14+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [syslog-ng]. 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [synotunnel] ... 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_restart.c:34 synoservice: [synotunnel] is not enabled, skip restart action ... 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [synotunnel]. 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [nginx]. 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [nginx]. 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [synotunnel] ... 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_restart.c:34 synoservice: [synotunnel] is not enabled, skip restart action ... 2020-03-30T16:52:19+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [synotunnel]. 2020-03-30T16:52:22+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [synotunnel] ... 2020-03-30T16:52:22+01:00 DiskStation synoservice: service_restart.c:34 synoservice: [synotunnel] is not enabled, skip restart action ... 2020-03-30T16:52:22+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [synotunnel]. 2020-03-30T16:52:22+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [synotunnel] ... 2020-03-30T16:52:22+01:00 DiskStation synoservice: service_restart.c:34 synoservice: [synotunnel] is not enabled, skip restart action ... 2020-03-30T16:52:22+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [synotunnel]. 2020-03-30T16:52:30+01:00 DiskStation synoservice: service_resume_by_reason.c:12 synoservice: resume [synologanalyzer] by reason [volume-action-hook] ... 2020-03-30T16:52:30+01:00 DiskStation s2s_volume_hook: service_start.c:74 synoservice: [s2s_daemon] starting ... 2020-03-30T16:52:30+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [nginx]. 2020-03-30T16:52:30+01:00 DiskStation s2s_volume_hook: service_start.c:178 synoservice: [s2s_daemon] started. 2020-03-30T16:52:30+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [nginx]. 2020-03-30T16:52:36+01:00 DiskStation synoservice: service_resume_by_reason.c:12 synoservice: resume [synologanalyzer] by reason [volume-action-hook] ... 2020-03-30T16:52:37+01:00 DiskStation synoservice: service_resume_by_reason.c:12 synoservice: resume [synologanalyzer] by reason [volume-action-hook] ... 2020-03-30T16:52:37+01:00 DiskStation synoservice: SYSTEM: Last message 'service_resume_by_re' repeated 1 times, suppressed by syslog-ng on DiskStation 2020-03-30T16:52:37+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [synosnmpcd]. 2020-03-30T16:52:37+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [synosnmpcd]. 2020-03-30T16:52:37+01:00 DiskStation synoservice: service_resume_by_reason.c:12 synoservice: resume [synologanalyzer] by reason [volume-action-hook] ... 2020-03-30T16:52:39+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [nmbd] ... 2020-03-30T16:52:40+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [nmbd]. 2020-03-30T16:52:40+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [avahi] ... 2020-03-30T16:52:40+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [avahi]. 2020-03-30T16:53:10+01:00 DiskStation synoservice: service_pause_by_reason.c:11 synoservice: pause [avahi] by reason [ipv4_change] ... 2020-03-30T16:53:10+01:00 DiskStation synoservice: service_pause.c:23 synoservice: [avahi] pausing ... 2020-03-30T16:53:11+01:00 DiskStation synoservice: service_pause.c:79 synoservice: [avahi] paused. 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [synotunnel] ... 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_restart.c:34 synoservice: [synotunnel] is not enabled, skip restart action ... 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [synotunnel]. 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_resume_by_reason.c:12 synoservice: resume [avahi] by reason [ipv4_change] ... 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [ssdp] ... 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [pppoerelay] ... 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [nmbd] ... 2020-03-30T16:53:12+01:00 DiskStation synoservice: service_start.c:74 synoservice: [avahi] starting ... 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_start.c:178 synoservice: [avahi] started. 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [nginx]. 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [pppoerelay]. 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [nmbd]. 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [nginx]. 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_restart.c:21 synoservice: restart [winbindd] ... 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_restart.c:34 synoservice: [winbindd] is not enabled, skip restart action ... 2020-03-30T16:53:13+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [winbindd]. 2020-03-30T16:53:14+01:00 DiskStation synoservice: service_restart.c:52 synoservice: finish restart [ssdp]. 2020-03-30T17:17:08+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [nginx]. 2020-03-30T17:17:08+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [nginx]. 2020-03-30T17:27:18+01:00 DiskStation synoservice: service_reload.c:20 synoservice: reload [nginx]. 2020-03-30T17:27:18+01:00 DiskStation synoservice: service_reload.c:46 synoservice: finish reload [nginx].
Spoilerroot@DiskStation:~# synoservice -status Service [avahi] status=[enable] required upstart job: [avahi] is start. ======================================= Service [miniupnpd-handler] status=[disable] required upstart job: [miniupnpd-handler] is stop. ======================================= Service [pkgctl-Docker] status=[disable] required upstart job: [pkgctl-Docker] is stop. ======================================= Service [ups-usb] status=[disable] required upstart job: [upsd-usb-adapter] is stop. ======================================= Service [pkgctl-SurveillanceStation] status=[disable] required upstart job: [pkgctl-SurveillanceStation] is stop. ======================================= service [findhost] status=[error] required upstart job: [findhostd] is stop. ======================================= Service [hotplugd] status=[enable] required upstart job: [hotplugd] is start. ======================================= Service [synosnmpcd] status=[enable] required upstart job: [synosnmpcd] is start. ======================================= Service [pkgctl-OpenHAB-demo-configuration] status=[enable] required upstart job: [pkgctl-OpenHAB-demo-configuration] is start. ======================================= Service [synonetd] status=[enable] required upstart job: [synonetd] is start. ======================================= Service [cups-lpd] status=[disable] required upstart job: [cups-lpd] is stop. [inetd] is stop. ======================================= Service [syslog-acc] status=[enable] required upstart job: [syslog-acc] is start. ======================================= Service [manutild] status=[disable] required upstart job: [manutild] is stop. ======================================= Service [pkgctl-nzbdrone] status=[enable] required upstart job: [pkgctl-nzbdrone] is start. ======================================= Service [s2s_daemon] status=[enable] required upstart job: [s2s_daemon] is start. ======================================= Service [support-remote-access] status=[disable] required upstart job: [synorelayd] is stop. ======================================= Service [pkgctl-JavaManager] status=[disable] required upstart job: [pkgctl-JavaManager] is stop. ======================================= Service [nmbd] status=[enable] required upstart job: [nmbd] is start. ======================================= Service [ldap-server] status=[disable] required upstart job: [slapd-adapter] is stop. ======================================= Service [telnetd] status=[disable] required upstart job: [telnetd] is stop. [inetd] is stop. ======================================= Service [synoconfd] status=[enable] required upstart job: [synoconfd] is start. ======================================= Service [pkgctl-radarr] status=[enable] required upstart job: [pkgctl-radarr] is start. ======================================= Service [nfsd] status=[disable] required upstart job: [nfsd-adapter] is stop. ======================================= Service [crond] status=[enable] required upstart job: [crond] is start. ======================================= Service [pkgctl-SqueezeCenter] status=[disable] required upstart job: [pkgctl-SqueezeCenter] is stop. ======================================= Service [rsyncd] status=[disable] required upstart job: [rsyncd-adapter] is stop. [sshd] is start. ======================================= Service [synogpoclient] status=[enable] required upstart job: [synogpoclient] is start. ======================================= Service [synocrond] status=[enable] required upstart job: [synocrond] is start. ======================================= Service [synotunnel] status=[disable] required upstart job: [synotunnel] is stop. ======================================= Service [tftp] status=[disable] required upstart job: [opentftp] is stop. ======================================= Service [ntpd-client] status=[enable] required upstart job: [ntpd] is start. ======================================= Service [syslog-notify] status=[enable] required upstart job: [syslog-ng] is start. [syslog-notify] is start. ======================================= Service [pkgctl-OpenHAB] status=[enable] required upstart job: [pkgctl-OpenHAB] is start. ======================================= Service [pkgctl-Plex Media Server] status=[enable] required upstart job: [pkgctl-Plex Media Server] is start. ======================================= Service [pkgctl-TimeBackup] status=[disable] required upstart job: [pkgctl-TimeBackup] is stop. ======================================= Service [dbus] status=[enable] required upstart job: [dbus-system] is start. [dbus-session] is start. ======================================= Service [synorelayd] status=[disable] required upstart job: [synorelayd] is stop. ======================================= Service [synoindexd] status=[enable] required upstart job: [synoindexd] is start. ======================================= Service [dc-output] status=[enable] required upstart job: [dc-output] is start. ======================================= Service [synowstransfer] status=[disable] required upstart job: [synowstransfer-adapter] is stop. ======================================= Service [synoagentregisterd] status=[disable] required upstart job: [synoagentregisterd] is stop. ======================================= Service [apparmor] status=[enable] required upstart job: [apparmor] is start. ======================================= Service [ftpd] status=[disable] required upstart job: [ftpd] is stop. [ftpd-pure] is stop. ======================================= Service [ddns] status=[disable] required upstart job: [ddnsd] is stop. ======================================= Service [nslcd] status=[disable] required upstart job: [nslcd] is stop. ======================================= Service [synocachepinfiletool] status=[enable] required upstart job: [synocachepinfiletool] is stop. ======================================= Service [DSM] status=[enable] required upstart job: [synoscgi] is start. ======================================= Service [btacd] status=[disable] required upstart job: [btacd] is stop. ======================================= Service [usbipd] status=[disable] required upstart job: [usbipd] is stop. ======================================= Service [synomkthumbd] status=[enable] required upstart job: [synomkthumbd] is start. ======================================= Service [synocontentextractd] status=[disable] required upstart job: [synocontentextractd] is stop. ======================================= Service [synoperfeventd] status=[disable] required upstart job: [synoperfeventd] is stop. ======================================= Service [synomount] status=[enable] required upstart job: [synomount] is start. ======================================= Service [synoovs-db] status=[disable] required upstart job: [synoovs-db] is stop. ======================================= Service [atalk] status=[enable] required upstart job: [netatalk] is start. ======================================= Service [pgsql] status=[enable] required upstart job: [pgsql-adapter] is start. ======================================= Service [pkgctl-deluge] status=[enable] required upstart job: [pkgctl-deluge] is start. ======================================= Service [heartbeat] status=[disable] required upstart job: [heartbeatd] is stop. ======================================= Service [synowifid] status=[disable] required upstart job: [synowifid] is stop. ======================================= Service [pkgctl-AudioStation] status=[disable] required upstart job: [pkgctl-AudioStation] is stop. ======================================= Service [pkgctl-python] status=[enable] required upstart job: [pkgctl-python] is start. ======================================= Service [synologanalyzer] status=[enable] required upstart job: [synologand] is start. ======================================= Service [ftpd-ssl] status=[disable] required upstart job: [ftpd] is stop. [ftpd-ssl] is stop. ======================================= Service [pppoerelay] status=[enable] required upstart job: [pppoerelay] is start. ======================================= service [gcpd] status=[pause] required upstart job: [gcpd] is stop. ======================================= Service [upnpd] status=[disable] required upstart job: [upnpd] is stop. ======================================= Service [sftp] status=[disable] required upstart job: [sshd] is start. [ssh-sftp] is stop. ======================================= Service [synoovs-vswitch] status=[disable] required upstart job: [synoovs-vswitch] is stop. ======================================= Service [synostoraged] status=[enable] required upstart job: [synostoraged] is start. ======================================= Service [synocgid] status=[enable] required upstart job: [synocgid] is start. ======================================= Service [pkgctl-nzbget] status=[enable] required upstart job: [pkgctl-nzbget] is start. ======================================= Service [bonjour] status=[disable] required upstart job: [bonjour] is stop. ======================================= Service [cupsd] status=[disable] required upstart job: [cupsd] is stop. ======================================= Service [synotifyd] status=[disable] required upstart job: [synotifyd] is stop. ======================================= Service [syslog-ng] status=[enable] required upstart job: [syslog-ng] is start. ======================================= Service [natpmpd] status=[disable] required upstart job: [natpmpd] is stop. ======================================= Service [sssd] status=[disable] required upstart job: [sssd] is stop. ======================================= Service [bluetoothd] status=[disable] required upstart job: [bluetoothd] is stop. ======================================= service [scemd] status=[error] required upstart job: [scemd] is stop. ======================================= service [nginx] status=[error] required upstart job: [nginx] is stop. ======================================= Service [synomkflvd] status=[enable] required upstart job: [synomkflvd] is start. ======================================= Service [pkgctl-mono] status=[enable] required upstart job: [pkgctl-mono] is start. ======================================= Service [synovpnclient] status=[enable] required upstart job: [synovpnclient] is start. ======================================= Service [winbindd] status=[disable] required upstart job: [winbindd] is stop. ======================================= Service [snmp] status=[enable] required upstart job: [snmpd] is start. ======================================= Service [pkgctl-Perl] status=[disable] required upstart job: [pkgctl-Perl] is stop. ======================================= Service [synopyntlmd] status=[disable] required upstart job: [synopyntlmd] is stop. ======================================= Service [ntpd-server] status=[enable] required upstart job: [ntpd] is start. ======================================= Service [samba] status=[enable] required upstart job: [smbd] is start. ======================================= Service [iscsitrg] status=[enable] required upstart job: [iscsitrg-adapter] is start. ======================================= Service [ssh-shell] status=[enable] required upstart job: [ssh-shell] is start. [sshd] is start. ======================================= Service [synocacheclient] status=[enable] required upstart job: [synocacheclient] is start. ======================================= Service [synologrotate] status=[enable] required upstart job: [synologrotated] is start. ======================================= Service [ups-net] status=[disable] required upstart job: [upsd-net-adapter] is stop. ======================================= Service [ssdp] status=[enable] required upstart job: [minissdpd] is start. ======================================= Service [synobackupd] status=[enable] required upstart job: [synobackupd] is start. =======================================
Spoiler==> /var/log/messages <== 2020-03-30T17:35:52+01:00 DiskStation afpd[25414]: [dsi_tcp.c:473-E] dsi_tcp_init: no suitable network config for TCP socket 2020-03-30T17:35:52+01:00 DiskStation afpd[25414]: [afp_config.c:229-E] no suitable network address found, use "afp listen" or "afp interfaces" 2020-03-30T17:35:52+01:00 DiskStation afpd[25414]: [main.c:448-E] main: no servers configured 2020-03-30T17:35:52+01:00 DiskStation afpd[25418]: [dsi_tcp.c:473-E] dsi_tcp_init: no suitable network config for TCP socket 2020-03-30T17:35:52+01:00 DiskStation afpd[25418]: [afp_config.c:229-E] no suitable network address found, use "afp listen" or "afp interfaces" 2020-03-30T17:35:52+01:00 DiskStation afpd[25418]: [main.c:448-E] main: no servers configured 2020-03-30T17:35:54+01:00 DiskStation afpd[25421]: [dsi_tcp.c:473-E] dsi_tcp_init: no suitable network config for TCP socket 2020-03-30T17:35:54+01:00 DiskStation afpd[25421]: [afp_config.c:229-E] no suitable network address found, use "afp listen" or "afp interfaces" 2020-03-30T17:35:54+01:00 DiskStation afpd[25421]: [main.c:448-E] main: no servers configured
Spoilerroot@DiskStation:/var/log/nginx# more /var/log/nginx/error.log 2020/03/30 13:36:08 [emerg] 13082#13082: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 13:36:09 [emerg] 13281#13281: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 13:36:09 [notice] 13286#13286: signal process started 2020/03/30 13:36:09 [error] 13286#13286: invalid PID number "" in "/run/nginx.pid" 2020/03/30 14:15:00 [emerg] 13726#13726: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 14:15:00 [emerg] 13768#13768: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 14:15:00 [notice] 13773#13773: signal process started 2020/03/30 14:15:00 [error] 13773#13773: invalid PID number "" in "/run/nginx.pid" 2020/03/30 14:48:16 [emerg] 13258#13258: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 14:48:16 [emerg] 13316#13316: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 14:48:16 [notice] 13327#13327: signal process started 2020/03/30 14:48:16 [error] 13327#13327: invalid PID number "" in "/run/nginx.pid" 2020/03/30 15:36:52 [emerg] 13156#13156: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 15:36:52 [emerg] 13181#13181: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 15:36:52 [notice] 13192#13192: signal process started 2020/03/30 15:36:52 [error] 13192#13192: invalid PID number "" in "/run/nginx.pid" 2020/03/30 16:52:34 [emerg] 12321#12321: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 16:52:34 [emerg] 12451#12451: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 16:52:34 [notice] 12458#12458: signal process started 2020/03/30 16:52:34 [error] 12458#12458: invalid PID number "" in "/run/nginx.pid" 2020/03/30 17:47:03 [emerg] 28121#28121: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 17:47:03 [emerg] 28130#28130: socket() [::]:5000 failed (97: Address family not supported by protocol) 2020/03/30 17:47:03 [notice] 28135#28135: signal process started 2020/03/30 17:47:03 [error] 28135#28135: invalid PID number "" in "/run/nginx.pid"
Spoilerroot@DiskStation:/var/log/nginx# synoservice -start nginx service [nginx] start failed, synoerr=[0x0000]
Spoilerroot@DiskStation:/var/log/nginx# synoscgi Copyright (c) 2003-2019 Synology Inc. All rights reserved. Usage: synoscgi (Version 24922) --help: this help --mode: scgi|apid (required) run as synoscgi or synoapid scgi related params: --idle-child={childNumber} (optional, default: 10) max idle child number --max-child={childNumber} (optional, default: 65535) max child number apid related params: --conf (required) apid config realpath
-
hi,
newbie here. been lurking for a while though.
ok, i messed up. i had a few days off work, and plex wasnt letting me update (it was crashing doing a scan regularly) so i decided to bite the bullet and upgrade from DSM5.2
read and re-read the guide. all was going swimmingly until i stupidly hit next on the upgrade screen and it downloaded and installed the latest version, rather than the 6.1 pat file i'd grabbed.
i have a gen8 hp microserver. im assuming i've hit the NIC issue. i dont have an intel card to hand, so will have to order one i guess.... or is there a way round it? (downgrade to 6.1 somehow? fiddle with extra.lzma?)
*edit*
attempting downgrade. i'm back into a working OS running on an old spare hdd, but how best to get the raid array/original drive working with it? drop the other 3 drives back in and then swap the blank one back out for the original?
aprl and sataportmap config when using hp p222 pci controller on gen8 microserver
in General Questions
Posted
so i eventually got everything working.... i ended up running TCRP and it correctly worked out sataportmap=1 / diskidxmap=0, i got a recovery screen upon boot, and am now repairing the various broken apps/user permissions due to the 6.22>7.0.1 upgrade
i'll have a crack at a full howto once i get a moment, but might have to wait till i get back off holiday