[HP N54L - DSM 6.1 onwards]

On 27.7.2017 at 9:36 AM, A.S._id said:

Hi,

Steps the same how to always:

*create usb bootloader, edit vid, pid, mac, serial, sata, boot default into grub.config

*OFF C1E into BIOS

* boot from USB, to find NAS into Assistant, to do migration

* Enjoy

 this works from 6.0.2 too or have to do the extra steps with scripts, share and more?

[DSM 6.1.x Loader]

thanks for the answer. so waiting for new releases.

[DSM 6.1.x Loader]

someone mirgrated baremetal from 6.0 to latest 6.1 release? i have n54l.

[DSM 6.1.x Loader]

Possible to update /upgrade baremetal (hp n54l) from DSM 6 to latest 6.1 with new loader? is there a upgrade guide or must it be a fresh installation?

[DSM 6.0.2-8451 Update 11]

install on n54l baremmetal with no problems.

[DSM 6.0.2-8451 Update 11]

update 11 for 6.0 is out.

safe for install too?

[DSM 6.1.x Loader]

good news thank you. waiting too for a new loader for amd support on 6.1

[DSM 6.1.x Loader]

someone installed update 10 with dsm 6.0 (n54l)?

[DSM 6.1.x Loader]

DSM 6.1 safe to install on baremetal n54l with 6.02 alpha bootloader?

[DSM 6.1.x Loader]

update 10 safe to install?

[DSM 6.1.x Loader]

Is update 9 safe to install on baremetal (n54l)? i´m not sure from the other postings.

[DSM 6.1.x Loader]

Just updated from 5.2 to 6.xxx update 3 with my n54l with 5 discs. Everything perfect - thank you guys.

[DSM 5.0-4493 Update 7]

So gestern upgegraded von 4 auf 7 nach Datenbackup und Konfig Sicherung. Nach Reboot und folgendem Aus- und Einschalten des Gerätes waren Platten und Raid wieder vorhanden. Benutzerberechtigung musste neu gemacht werden sowie Medienindizierung.

[How to install the latest : 5.0-4493 Update 7]

If I install from update 4 to 7 are there the same problems with update 5?

[DSM 5.0-4493 Update 7]

hat jemand von 4 auf 7 upgedated? Treten dann die Probleme von 5 auf oder läuft alles ohne Probleme? Hardware: HP N54L.

[Trial of Nanoboot (4493) - 5.0.3.1]

Yes you can. It's the same line. I think you got my image which uses grub instead of syslinux.

 

Yes you´re right, it´s the image from your site. Thank you .

[Nanoboot and VID / PID changing]

Hello all,

 

I´ve installed latest DSM and Nanoboot native on a HP54L.

Question: can i simple edit menu_nano.lst

 

kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=xxxxxxxxx vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305

 

with my usb stick vid and pid to hide the stick in the dsm? I don´t found syslinux.cfg in the native img file.

[Trial of Nanoboot (4493) - 5.0.3.1]

I´ve installed latest DSM and Nanoboot native on a HP54L.

Question: can i simple edit menu_nano.lst

 

kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=xxxxxxxxx vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305

 

with my usb stick vid and pid to hide the stick in the dsm? I don´t found syslinux.cfg in the native img file.

[Trial of Nanoboot (4493) - 5.0.3.1]

Hello All,

 

i´ve read in German Xpenolog Forum that someone got a Problem with migration from gnoboot to nanoboot with 6 HDDs.

viewtopic.php?f=6&t=3084&start=10

 

I have a DSM 5.0 4458 gnoboot 10.5 Installation running on a N54L, modified BIOS and used ESATA Port with 5 HDDs in a SHR Raid. May i become Problems with Nanoboot (Drivers, Capacity limited to 4 HDDs) or can i use the guide http://cyanlabs.co.uk/tutorials/synolog ... o-nanoboot without known problems?

 

Thanks