[xpenology on ASRock Z490M-ITX/AC]

has anyone tried to install 6.2.3 on a ASRock Z490M-ITX/AC ? ( or similar z490 mini itx board )

i hope to install xpenology on this board with a pentium g6500 or i3 with 3 x 4tb  and two nvme ssd cache and a 10gb nic

 

thanks in advance

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

hi

 

i have attached the dsemg.file

 

thanks eric

dmesg

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

hi i have searched and found this in ethtool.eth2.result

 

Settings for eth2:
    Supported ports: [ TP ]
    Supported link modes:   100baseT/Full
                            1000baseT/Full
                            10000baseT/Full
    Supported pause frame use: Symmetric
    Supports auto-negotiation: Yes
    Advertised link modes:  100baseT/Full
                            1000baseT/Full
                            10000baseT/Full
    Advertised pause frame use: Symmetric
    Advertised auto-negotiation: Yes
    Speed: Unknown!
    Duplex: Full
    Port: Twisted Pair
    PHYAD: 0
    Transceiver: external
    Auto-negotiation: on
    MDI-X: Unknown
    Supports Wake-on: g
    Wake-on: d
    Link detected: no

 

and this in ethtool_info.eth2.result

 

driver: atlantic
version: 2.0.10.0
firmware-version: 3.1.30
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

 

if you want more info let me know which files

 

thanks eric

 

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

thanks

installed 0.11 with date 29/04/20 as explained in 1st page but DSM does not recognised my synnology E10G18T1

 

DSM 25426 DS918+ on z370 and g5400

 

what am i doing wrong ?

 

thanks eric

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

hi IG88

 

where can i download 0.11.2 ?

 

checked the 0.11 file but data was 29/04/20

 

thanks eric

[DSM 6.2 Loader]

hello

i used jun loader 1.04 and 918+ 23739.pat file

everthing works ok

but the speed is a little low about 70-80mb copy speed. my last nas with dsm 5.2 gets 112mb on the same network

 

if i use jun loader 1.04 with 23739 from the 3617xs pat file can i get better speed ?

 

thanks

eric

[DSM 6.2 Loader]

hi

i am building a new nas for replacement of the old 5.2. i have mb j4205 and downloaded jun loaeder 1.04. replaced mac adress, pin and vid for usb and lan card.

must the serialnummber replaced with ?

 

xpenologyserial generator has only serial for 3615, 3617 and 916+

 

or can i use the serial number mentioned in grub

 

thanks eric