![](https://xpenology.com/forum/uploads/set_resources_8/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
afaroz61
-
Posts
17 -
Joined
-
Last visited
Posts posted by afaroz61
-
-
On 3/10/2023 at 9:37 PM, royeiror said:
Is anyone using a CGNAT traversal solution?
In the office I have a genuine DS920+ that works perfectly with QuickConnect and Synology DDNS.
I've managed to convert 2 Lenovo ThinkCentre M600 Tiny PCs into DVA3221, one of them uses DDNS with DYNU.COM with no problems, but the other is behind my ISP's CGNAT (IZZI). I would love to have a similar solution, but I haven't managed it. I do have my domains with cloudflare and read about CloudFlare Tunnels, but I couldn't figure out.
Has anyone solved this problem?
Use vpn or buy serial number for xpenology
-
I was able to install DSM 7 without any problems. Is there a possibility to switch from DSM 6 to apl dsm? How is the update done?
-
-
hi. Is there a tutorial for updating juns 1.04b-DSM 6.2.3-25426 Update 3 (3617xs) to DSM 7? It has 40tb of data. Can I provide lossless migration?
-
@IG-88 these same file ?
extra.lzma for loader 1.03b ds3615 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ...
http://s000.tinyupload.com/?file_id=04147311964729253115
extra.lzma for loader 1.03b ds3617 DSM 6.2.3 v0.11_test, same added drivers as for 6.2.2 like newer intel drivers, 10G nics, ...
-
@IG-88 Do you have the opportunity to work on adaptec? Is it enough to get the .ko file from the adamptec website and change it?
-
8 hours ago, IG-88 said:
i cant find anything in my old 6.1 extra.lzma about a newer aacraid.ko and if it would be the standard kernel version you should be able to use it with 918+ as it has even a newer kernel
whats the version number of your driver
try this on your 3617
dmesg |grep aacraid
edit: it looks like i did a newer driver for 918+ in 2018 (from driver list loader 1.03a -> external v1.2.1.56008)
any newer driver source you can provide?
v1.2.1.56008 for Adaptech 8xxx. I need 7xxx - Linux Driver Source 1.2.1-52033 (https://storage.microsemi.com/en-us/speed/raid/aac/linux/aacraid-linux-src-1.2.1-52033_tgz.php)
-
19 minutes ago, IG-88 said:
i cant find anything in my old 6.1 extra.lzma about a newer aacraid.ko and if it would be the standard kernel version you should be able to use it with 918+ as it has even a newer kernel
whats the version number of your driver
try this on your 3617
dmesg |grep aacraid
admin@HomeCloud:/$ dmesg |grep aacraid
[ 3.243732] Adaptec aacraid driver 1.2-0[30200]-ms
[ 3.261162] scsi4 : aacraid
if ı use extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.11 card is working. But system does not receive ip address after installation
-
2 hours ago, IG-88 said:
did you ever used this card with dsm/xpenology? the system is build around using plain disks and software raid (mdadm)
even with a driver you would need to have your own tool looking for the "hardware" raid and usually you cant because of the fact its a appliance and you cant install software the normal way like with apt-get
I use Adaptec asr-71605 with 3617xs(dsm 6.1) But I want to use it with 918.
-
My system.
Intel G4400
Asrock H110m/ITX (NIC i219v)
Adaptec 71605
I have a problem. I want to install 918+. I install using 1.04b and DS918+_24922.pat But raid controller not working. I tried extra.lzma (0.8 all version) the problem continued.
I tried extra.lzma for 6.2.3 all hardware recognized smoothly but Unable to get the ip address after installation. How can i use raid card wit 918+?
-
-
On 7/9/2018 at 8:34 PM, IG-88 said:
your controller is not in my list as supported
your live ubuntu presumably using a newer kernel/driver
must be a newer type/chip that was not supported by kerne 3.10.102?
they seem to offer recent driver source so i can try to compile it
https://storage.microsemi.com/en-us/support/raid/sas_raid/sas-71605e/
https://storage.microsemi.com/en-us/support/raid/sas_raid/asr-81605z/
it something useful comes up from this i will write about in in the additional compiled modules section
Please add Adaptech 71605 driver. Im useing asrock h110m itx and intel g4400 but not working raid controller
-
@saxoncan you look at your private message?
-
replace them according to their own USB
set vid=0x0781
set pid=0x5583
-
Loader version and type (DS3617xs): 1.03b
DSM version in use (including critical update): DSM 6.2-23739
Using custom modules/ramdisk? If yes which one?: None
Hardware details:
ASRock H110M-ITX >> Intel G4400 >> NIC: Intel I219V 1000 mb/s >> LSI 9260-8i with WD Red 5 x 4TB Raid5
Automated RedPill Loader (ARPL)
in Loaders
Posted · Edited by afaroz61
Hi. I have X10SLH-N6-ST031 (onboard INTEL x540 AT2 - 6x 10gbe) I am using ARC loader. I cannot connect 2.5g and 10g. The connection always shows gigabit. The cable is solid. When I connect the computer with a cable, I can establish a 2.5g connection. I tried 918+ - 920 - 3622xs. Can you help me?