[6.2 on P5NE-SLI possible? 5.2 working well]

In the mean time I continued to read the forum and extract from my NAS the list of "KERNEL MODULES" from Linux Lite Live USB stick which I booted on to.

 

Here is the list. Can you please tel me which modules are mandatory for DSM 6.2 to run fine ? Thank you.

 

Computer

Kernel Modules

Loaded Modules

appledisplayApple Cinema Display driver

ip6t_REJECTXtables: packet "rejection" target for IPv6

nf_reject_ipv6

nf_log_ipv6Netfilter IPv6 packet logging

xt_hlXtables: Hoplimit/TTL field match

ip6t_rtXtables: IPv6 Routing Header match

nf_conntrack_ipv6

nf_defrag_ipv6

ipt_REJECTXtables: packet "rejection" target for IPv4

snd_hda_codec_realtekRealtek HD-audio codec

nf_reject_ipv4

snd_hda_codec_genericGeneric HD-audio codec parser

nf_log_ipv4Netfilter IPv4 packet logging

nf_log_common

xt_LOGXtables: IPv4/IPv6 packet logging

snd_hda_codec_hdmiHDMI HD-audio codec

snd_hda_intelIntel HDA driver

snd_hda_codecHDA codec core

snd_hda_coreHD-audio bus

snd_hwdepHardware dependent layer

xt_limitXtables: rate-limit match

snd_pcmMidlevel PCM code for ALSA.

xt_tcpudpXtables: TCP, UDP and UDP-Lite match

snd_seq_midiAdvanced Linux Sound Architecture sequencer MIDI synth.

snd_seq_midi_eventMIDI byte <-> sequencer event coder

snd_rawmidiMidlevel RawMidi code for ALSA.

xt_addrtypeXtables: address type match

snd_seqAdvanced Linux Sound Architecture sequencer.

input_ledsInput -> LEDs Bridge

snd_seq_deviceALSA sequencer device management

snd_timerALSA timer interface

coretempIntel Core temperature monitor

kvm_intel

kvm

irqbypassIRQ bypass manager utility module

sndAdvanced Linux Sound Architecture driver for soundcards.

nf_conntrack_ipv4

nf_defrag_ipv4

soundcoreCore sound module

xt_conntrackXtables: connection tracking state match

asus_atk0110

mac_hid

shpchpStandard Hot Plug PCI Controller Driver

ip6table_filterip6tables filter table

ip6_tablesIPv6 packet filter

sch_fq_codel

nf_conntrack_netbios_nsNetBIOS name service broadcast connection tracking helper

nf_conntrack_broadcast

nf_nat_ftpftp NAT helper

nf_nat

nf_conntrack_ftpftp connection tracking helper

nf_conntrack

libcrc32cCRC32c (Castagnoli) calculations

parport_pcPC-style parallel port driver

ppdev

lp

iptable_filteriptables filter table

parport

ip_tablesIPv4 packet filter

x_tables{ip,ip6,arp,eb}_tables backend module

autofs4

overlayOverlay filesystem

nls_utf8

isofs

dm_mirrordevice-mapper mirror target

dm_region_hashdevice-mapper region hash

dm_logdevice-mapper dirty region log

uas

usb_storageUSB Mass Storage driver for Linux

hid_genericHID generic driver

usbhidUSB HID core driver

hid

radeonATI Radeon

i2c_algo_bitI2C-Bus bit-banging algorithm

pata_acpiSCSI low-level driver for ATA in ACPI mode

firewire_ohciDriver for PCI OHCI IEEE1394 controllers

firewire_coreCore IEEE1394 transaction logic

crc_itu_tCRC ITU-T V.41 calculations

ttmTTM memory manager subsystem (for DRM device)

sata_sillow-level driver for Silicon Image SATA controller

forcedethReverse Engineered nForce ethernet driver

ahciAHCI SATA low-level driver

drm_kms_helperDRM KMS helper

libahciCommon AHCI SATA low-level routines

syscopyareaGeneric copyarea (sys-to-sys)

sysfillrectGeneric fill rectangle (sys-to-sys)

sata_nvlow-level driver for NVIDIA nForce SATA controller

sysimgblt1-bit/8-bit to 1-32 bit color expansion (sys-to-sys)

fb_sys_fopsGeneric file read (fb in system RAM)

e1000eIntel(R) PRO/1000 Network Driver

i2c_nforce2nForce2/3/4/5xx SMBus driver

drmDRM shared core routines

ptpPTP clocks support

pata_amdlow-level driver for AMD and Nvidia PATA IDE

pps_coreLinuxPPS support (RFC 2783) - ver. 5.3.6

floppy

 

Regards,

 

Bikester

[6.2 on P5NE-SLI possible? 5.2 working well]

Hi everyone and thank you for the help you could give me.

 

Currently my NAS is working like a charm:

 

    DSM 5.2 (XPEnoboot 5.2-5644.5 DS3615xs / DSM_5.2-5644 Update-5)

    Motherbord : ASUS P5NE-SLI Chipset NVidia nforce 650i

    CPU : Core 2 Quad Q9400

    8 Go RAM

    2 x Silicone Image 3114 PCI --> 4 SATA (Working very good)

    Onboard SATA, LAN working good too

    Intel Gigabit Ethernet Card PCI-E Working fine too

 

    4x2To on RAID 10 on Sil3114

    4x3To on RaID0 on the second Sil3114

 

What I've already tried:

- Tuto youtube of BOOBYTRAP on how to install DSM 6.2 / 6.1 / Migrating 5.2 to 6.1 ...  (Thank You So Much For Such Wonderful Tuto !)

- Already tried to copile additional drivers with BASH Ubuntu for Windows (Boobytrap again...)

- Tried this on 3617xs / 3615xs 6.2 / 6.1 Juns loaders versions

- The best I could get is the LAN working but none of disk recognised to be plugged-in in order to continue installation.

- Tried to unplug all disks, to plug only one disk on SATA0 MB port, MapSATAports as 444, none of these worked.

 

BTW I already installed DSM 6.1 with no problem on my ASUS ROG Laptop G75 to test the install procedure. 

 

As Xpenoboot 5.2 is working good, is there any mean to get Xpenoboot drivers in order de make a extra.lzma file for my configuration?

 

Many Thanks for your contribution to my problem.

 

Bikester

 

[Introduce yourself here]

Hi everyone, 

 

I'm aerothermal engineer coming from France. Using Xpenology on a dedicated server (P5NE-SLI, Core 2 Quad Q9400, 8gigs RAM) for now 3 years under DSM 5.2 working like a charm.

I come on this forum to improve myself about DSM 6.0 and upper version as I still struggle with drivers (2x Sil 3114 cards for exemple).

 

Hope to find some information here.

 

Very good job seen on this forum.

 

Take care.

 

Bikester