bikester92

In the mean time I continued to read the forum and extract from my NAS the list of "KERNEL MODULES" from Linux Lite Live USB stick which I booted on to. Here is the list. Can you please tel me which modules are mandatory for DSM 6.2 to run fine ? Thank you. Computer Kernel Modules Loaded Modules appledisplayApple Cinema Display driver ip6t_REJECTXtables: packet "rejection" target for IPv6 nf_reject_ipv6 nf_log_ipv6Netfilter IPv6 packet logging xt_hlXtables: Hoplimit/TTL field match ip6t_rtXtables: IPv6 Routing Header match nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECTXtables: packet "rejection" target for IPv4 snd_hda_codec_realtekRealtek HD-audio codec nf_reject_ipv4 snd_hda_codec_genericGeneric HD-audio codec parser nf_log_ipv4Netfilter IPv4 packet logging nf_log_common xt_LOGXtables: IPv4/IPv6 packet logging snd_hda_codec_hdmiHDMI HD-audio codec snd_hda_intelIntel HDA driver snd_hda_codecHDA codec core snd_hda_coreHD-audio bus snd_hwdepHardware dependent layer xt_limitXtables: rate-limit match snd_pcmMidlevel PCM code for ALSA. xt_tcpudpXtables: TCP, UDP and UDP-Lite match snd_seq_midiAdvanced Linux Sound Architecture sequencer MIDI synth. snd_seq_midi_eventMIDI byte <-> sequencer event coder snd_rawmidiMidlevel RawMidi code for ALSA. xt_addrtypeXtables: address type match snd_seqAdvanced Linux Sound Architecture sequencer. input_ledsInput -> LEDs Bridge snd_seq_deviceALSA sequencer device management snd_timerALSA timer interface coretempIntel Core temperature monitor kvm_intel kvm irqbypassIRQ bypass manager utility module sndAdvanced Linux Sound Architecture driver for soundcards. nf_conntrack_ipv4 nf_defrag_ipv4 soundcoreCore sound module xt_conntrackXtables: connection tracking state match asus_atk0110 mac_hid shpchpStandard Hot Plug PCI Controller Driver ip6table_filterip6tables filter table ip6_tablesIPv6 packet filter sch_fq_codel nf_conntrack_netbios_nsNetBIOS name service broadcast connection tracking helper nf_conntrack_broadcast nf_nat_ftpftp NAT helper nf_nat nf_conntrack_ftpftp connection tracking helper nf_conntrack libcrc32cCRC32c (Castagnoli) calculations parport_pcPC-style parallel port driver ppdev lp iptable_filteriptables filter table parport ip_tablesIPv4 packet filter x_tables{ip,ip6,arp,eb}_tables backend module autofs4 overlayOverlay filesystem nls_utf8 isofs dm_mirrordevice-mapper mirror target dm_region_hashdevice-mapper region hash dm_logdevice-mapper dirty region log uas usb_storageUSB Mass Storage driver for Linux hid_genericHID generic driver usbhidUSB HID core driver hid radeonATI Radeon i2c_algo_bitI2C-Bus bit-banging algorithm pata_acpiSCSI low-level driver for ATA in ACPI mode firewire_ohciDriver for PCI OHCI IEEE1394 controllers firewire_coreCore IEEE1394 transaction logic crc_itu_tCRC ITU-T V.41 calculations ttmTTM memory manager subsystem (for DRM device) sata_sillow-level driver for Silicon Image SATA controller forcedethReverse Engineered nForce ethernet driver ahciAHCI SATA low-level driver drm_kms_helperDRM KMS helper libahciCommon AHCI SATA low-level routines syscopyareaGeneric copyarea (sys-to-sys) sysfillrectGeneric fill rectangle (sys-to-sys) sata_nvlow-level driver for NVIDIA nForce SATA controller sysimgblt1-bit/8-bit to 1-32 bit color expansion (sys-to-sys) fb_sys_fopsGeneric file read (fb in system RAM) e1000eIntel(R) PRO/1000 Network Driver i2c_nforce2nForce2/3/4/5xx SMBus driver drmDRM shared core routines ptpPTP clocks support pata_amdlow-level driver for AMD and Nvidia PATA IDE pps_coreLinuxPPS support (RFC 2783) - ver. 5.3.6 floppy Regards, Bikester

Hi everyone and thank you for the help you could give me. Currently my NAS is working like a charm: DSM 5.2 (XPEnoboot 5.2-5644.5 DS3615xs / DSM_5.2-5644 Update-5) Motherbord : ASUS P5NE-SLI Chipset NVidia nforce 650i CPU : Core 2 Quad Q9400 8 Go RAM 2 x Silicone Image 3114 PCI --> 4 SATA (Working very good) Onboard SATA, LAN working good too Intel Gigabit Ethernet Card PCI-E Working fine too 4x2To on RAID 10 on Sil3114 4x3To on RaID0 on the second Sil3114 What I've already tried: - Tuto youtube of BOOBYTRAP on how to install DSM 6.2 / 6.1 / Migrating 5.2 to 6.1 ... (Thank You So Much For Such Wonderful Tuto !) - Already tried to copile additional drivers with BASH Ubuntu for Windows (Boobytrap again...) - Tried this on 3617xs / 3615xs 6.2 / 6.1 Juns loaders versions - The best I could get is the LAN working but none of disk recognised to be plugged-in in order to continue installation. - Tried to unplug all disks, to plug only one disk on SATA0 MB port, MapSATAports as 444, none of these worked. BTW I already installed DSM 6.1 with no problem on my ASUS ROG Laptop G75 to test the install procedure. As Xpenoboot 5.2 is working good, is there any mean to get Xpenoboot drivers in order de make a extra.lzma file for my configuration? Many Thanks for your contribution to my problem. Bikester

Hi everyone, I'm aerothermal engineer coming from France. Using Xpenology on a dedicated server (P5NE-SLI, Core 2 Quad Q9400, 8gigs RAM) for now 3 years under DSM 5.2 working like a charm. I come on this forum to improve myself about DSM 6.0 and upper version as I still struggle with drivers (2x Sil 3114 cards for exemple). Hope to find some information here. Very good job seen on this forum. Take care. Bikester