[Tutorial: DSM 6.x on Proxmox]

So for some reason I can't edit my post anymore. I want to share my final configuration:

args: -netdev type=tap,id=net0,ifname=tap100i0 -device e1000e,mac=E6:66:08:41:7B:E4,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300 -netdev type=tap,id=net1,ifname=tap100i1 -device e1000e,mac=E6:66:08:41:7B:E5,netdev=net1,bus=pci.0,addr=0x13,id=net1,bootindex=301
balloon: 0
boot: cdn
bootdisk: sata0
cores: 4
ide2: none,media=cdrom
memory: 6144
name: XpenologyDSM
numa: 0
ostype: l26
sata0: local-lvm:vm-100-disk-1,size=52M
sata1: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N5HPLJXC,size=2930266584K
sata2: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N0853082,size=2930266584K
scsihw: virtio-scsi-pci
serial0: socket
smbios1: uuid=e5f1edb1-dbaf-4566-ab3e-5fb8e09c9ed7
sockets: 1
unused0: local-lvm:vm-100-disk-0
vmgenid: 7d73c95b-8881-4b29-8148-ce5ba7ce3df2

 

[Tutorial: DSM 6.x on Proxmox]

On 3/18/2019 at 12:40 PM, hellbondz said:

Hi everyone.

Thanks, this looked very promising, but I still can't get it to work. I tried both 1.04b and 1.03b. Still only 1.02b is working for me. This is my config now:

args: -netdev type=tap,id=net0,ifname=tap100i0 -device e1000e,mac=86:34:AC:A9:45:39,netdev=net0,bus=pci.0,addr=0x12,id=net0
balloon: 0
bios: ovmf
boot: cdn
bootdisk: ide0
cores: 4
efidisk0: local-lvm:vm-100-disk-1,size=128K
ide0: local-lvm:vm-100-disk-2,size=52M
memory: 4096
name: XpenologyDSM
numa: 0
ostype: l26
sata0: local-lvm:vm-100-disk-0,size=16G
smbios1: uuid=3d3c5c7d-1b76-4039-80d0-942181314da8
sockets: 1
vmgenid: d9f04767-a430-41c0-843c-ff619283913c

So also for some reason I can only boot when I use the synoimage as ide or sata device (hence the ide0 device) after importing it with this:

qm importdisk 100 /var/lib/vz/images/100/synoboot.img local-lvm

 

But that works. The problem now is that network does not come up and does not get an IP from the router.

 

This config seems to work with the 1.02b bootloader, so maybe something is wrong with the bootloader I have?

 

edit:

I solved it by following this:

After that, I changed the network adapter to e1000e

[DSM 6.2 Loader]

On my HP Microserver Gen 8 I did a dirty update from 6.1 DS3615xs to update 6.2 DS3615xs . When it wanted to restart, I changed the boot USB to the new loader 1.03b.

After that, I switched the boot USB again to 1.03b DS3617xs and migration went without problems.

 

I read that for DSM 6.2, the linux kernel would be version 4.4, but I run the DS3617xs version and it's still on 3.10. Is this only the case for XPenology?