alpakay

So for some reason I can't edit my post anymore. I want to share my final configuration: args: -netdev type=tap,id=net0,ifname=tap100i0 -device e1000e,mac=E6:66:08:41:7B:E4,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300 -netdev type=tap,id=net1,ifname=tap100i1 -device e1000e,mac=E6:66:08:41:7B:E5,netdev=net1,bus=pci.0,addr=0x13,id=net1,bootindex=301 balloon: 0 boot: cdn bootdisk: sata0 cores: 4 ide2: none,media=cdrom memory: 6144 name: XpenologyDSM numa: 0 ostype: l26 sata0: local-lvm:vm-100-disk-1,size=52M sata1: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N5HPLJXC,size=2930266584K sata2: /dev/disk/by-id/ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N0853082,size=2930266584K scsihw: virtio-scsi-pci serial0: socket smbios1: uuid=e5f1edb1-dbaf-4566-ab3e-5fb8e09c9ed7 sockets: 1 unused0: local-lvm:vm-100-disk-0 vmgenid: 7d73c95b-8881-4b29-8148-ce5ba7ce3df2

Thanks, this looked very promising, but I still can't get it to work. I tried both 1.04b and 1.03b. Still only 1.02b is working for me. This is my config now: args: -netdev type=tap,id=net0,ifname=tap100i0 -device e1000e,mac=86:34:AC:A9:45:39,netdev=net0,bus=pci.0,addr=0x12,id=net0 balloon: 0 bios: ovmf boot: cdn bootdisk: ide0 cores: 4 efidisk0: local-lvm:vm-100-disk-1,size=128K ide0: local-lvm:vm-100-disk-2,size=52M memory: 4096 name: XpenologyDSM numa: 0 ostype: l26 sata0: local-lvm:vm-100-disk-0,size=16G smbios1: uuid=3d3c5c7d-1b76-4039-80d0-942181314da8 sockets: 1 vmgenid: d9f04767-a430-41c0-843c-ff619283913c So also for some reason I can only boot when I use the synoimage as ide or sata device (hence the ide0 device) after importing it with this: qm importdisk 100 /var/lib/vz/images/100/synoboot.img local-lvm But that works. The problem now is that network does not come up and does not get an IP from the router. This config seems to work with the 1.02b bootloader, so maybe something is wrong with the bootloader I have? edit: I solved it by following this: After that, I changed the network adapter to e1000e

On my HP Microserver Gen 8 I did a dirty update from 6.1 DS3615xs to update 6.2 DS3615xs . When it wanted to restart, I changed the boot USB to the new loader 1.03b. After that, I switched the boot USB again to 1.03b DS3617xs and migration went without problems. I read that for DSM 6.2, the linux kernel would be version 4.4, but I run the DS3617xs version and it's still on 3.10. Is this only the case for XPenology?